|
|
 |
| Characteristics: |
DCU 001, Display Control Unit, The connecting cable DCU/TC (3 m) is included. Power supply exlusively from Pfeiffer electronic drive unit. In connection with the HiMag 2301 an extra cable is necessarily. (Order nr. PM 051 726 -T). The modular system with minimal costs, precisely tailored to your requirements.
|
|
|
|
DCU 100:
|
|
DCU 100, Display Control Unit incl. power supply
|
|
|
| Characteristics: |
Mains requirement: voltage (range) 90 - 132 / 185 - 265 V AC, Mains requirement: power consumption 125 VA, The connecting cable DCU/TC is included. The modular system with minimal costs, precisely tailored to your requirements.
|
|
|
|
DCU 200:
|
|
DCU 200, Display Control Unit incl. power supply
|
|
|
| Characteristics: |
Mains requirement: voltage (range) 90 - 132 / 185 - 265 V AC, Mains requirement: power consumption 230 VA , The connecting cable DCU/TC is included. The modular system with minimal costs, precisely tailored to your requirements.
|
|
|
|
DCU 300:
|
|
DCU 300, Display Control Unit incl. power supply
|
|
|
| Characteristics: |
Mains requirement: voltage (range) 90 - 132 / 185 - 265 V AC, Mains requirement: power consumption 350 VA, The connecting cable DCU/TC is included. The modular system with minimal costs, precisely tailored to your requirements.
|
|
|
|
DCU 600:
|
|
DCU 600, Display Control Unit, incl. power supply TPS
|
|
|
| Characteristics: |
Mains requirement: voltage (range): 90 - 132 / 185 - 265 V AC, Mains requirement: power consumption: 900 VA, The connecting cable DCU/TC is included. At main voltage 90-132 V AC reduced output current. (3,8 A) The modular system with minimal costs, precisely tailored to your requirements.
|
|
|
| Characteristics: |
Mains requirement: voltage (range) 115 / 230 V AC, 50/60 Hz, Mains requirement: power consumption 400 VA, Turbo pump: TMH/U 071 P; TMH/U 261 P; TMH/U 521 P, Mating plug for the Remote socket is included. The modular system with minimal costs, precisely tailored to your requirements. Entire turbopump drive control and regulation in one unit. All necessary remote functions included. Heating or air cooling and venting valve can be connected to the pump. Gauge connection to the TCP 350. Adapter available for existing pump cable. Cable lengths available up to 100 m.
|
|
|
|
TPS 100:
|
|
TPS 100, Mains pack for wall/standard rail fitting
|
|
|
| Characteristics: |
Mains requirement: voltage (range) 90 - 132 / 185 - 265 V AC, Mains requirement: power consumption 125 VA, The modular system with minimal costs, precisely tailored to your requirements.
|
|
|
|
TPS 200:
|
|
TPS 200, Mains pack for wall/standard rail fitting
|
|
|
| Characteristics: |
Mains requirement: voltage (range) 90 - 132 / 185 - 265 V AC, Mains requirement: power consumption: 230 VA, The modular system with minimal costs, precisely tailored to your requirements.
|
|
|
|
TPS 300:
|
|
TPS 300, Power supply for wall/standard rail fitting
|
|
|
| Characteristics: |
Mains requirement: voltage (range): 90 - 132 / 185 - 265 V AC
Mains requirement: power consumption: 350 VA
The modular system with minimal costs, precisely tailored to your requirements.
|
|
|
|
TPS 600:
|
|
TPS 600, Mains pack for wall/standard rail fitting
|
|
|
| Characteristics: |
Mains requirement: voltage (range) 90 - 132 / 185 - 265 V AC
Mains requirement: power consumption 900 VA
At main voltage 90-132 V AC reduced output current. (3,8 A)
The modular system with minimal costs, precisely tailored to your requirements.
|
|
|
|
|
|
| Characteristics: |
Designed with a high level communication interface
Features
* Automatic power supply detection from 100 to 240V 50/60Hz, single phase
* Menu operation
Sophisticated pump monitoring
* Rotational speed
* Pump current consumption
* Pump and controller temperature
* Total running time
* Pump fault detection
* Diagnostic mode with last ten alarm codes
Control of:
* Rotational speed
* venting
* Auto start
* Start delay
* Maintenance schedule
Multiple interfaces
* PC/PLC controlled processes via RS 232/485 (configurable)
* Remote control
Inputs:
* Remote start/stop
* Remote stand-by
* Remote interlock
Outputs:
* Pump starting
* Pump at speed
* Stand-by on
* Venting valve on/off
* Power supply of air cooling fan
* Selectable 0-10 volts output
|
|
|
|
|
|
| Characteristics: |
Designed with a high level communication interface
Features
* Automatic power supply detection from 100 to 240V 50/60Hz, single phase
* Menu operation
Sophisticated pump monitoring
* Rotational speed
* Pump current consumption
* Pump and controller temperature
* Total running time
* Pump fault detection
* Diagnostic mode with last ten alarm codes
Control of:
* Rotational speed
* venting
* Auto start
* Start delay
* Maintenance schedule
Multiple interfaces
* PC/PLC controlled processes via RS 232/485 (configurable)
* Remote control
Inputs:
* Remote start/stop
* Remote stand-by
* Remote interlock
Outputs:
* Pump starting
* Pump at speed
* Stand-by on
* Venting valve on/off
* Power supply of air cooling fan
* Selectable 0-10 volts output
|
|
|
|
|
|
| Characteristics: |
Designed with a high level communication interface
Features
* Automatic power supply detection from 100 to 240V 50/60Hz, single phase
* Menu operation
Sophisticated pump monitoring
* Rotational speed
* Pump current consumption
* Pump and controller temperature
* Total running time
* Pump fault detection
* Diagnostic mode with last ten alarm codes
Control of:
* Rotational speed
* venting
* Auto start
* Start delay
* Maintenance schedule
Multiple interfaces
* PC/PLC controlled processes via RS 232/485 (configurable)
* Remote control
Inputs:
* Remote start/stop
* Remote stand-by
* Remote interlock
Outputs:
* Pump starting
* Pump at speed
* Stand-by on
* Venting valve on/off
* Power supply of air cooling fan
* Selectable 0-10 volts output
|
|
|
|
|
|
| Characteristics: |
Designed with a high level communication interface
Features
* Automatic power supply detection from 100 to 240V 50/60Hz, single phase
* Menu operation
Sophisticated pump monitoring
* Rotational speed
* Pump current consumption
* Pump and controller temperature
* Total running time
* Pump fault detection
* Diagnostic mode with last ten alarm codes
Control of:
* Rotational speed
* venting
* Auto start
* Start delay
* Maintenance schedule
Multiple interfaces
* PC/PLC controlled processes via RS 232/485 (configurable)
* Remote control
Inputs:
* Remote start/stop
* Remote stand-by
* Remote interlock
Outputs:
* Pump starting
* Pump at speed
* Stand-by on
* Venting valve on/off
* Power supply of air cooling fan
* Selectable 0-10 volts output
|
|
|
|
|
|
| Characteristics: |
* TIC automatically recognizes and controls one 24 V turbomolecular pump from either the DX or EXDC ranges. DX turbos have full serial communication with TIC and may be both configured and report status via TIC.
* Both mains and 24 V backing pumps may be controlled by TIC. For larger vacuum systems the TIC may control mains backing pumps, including XDS10 and up to RV12, via the optional relay box.
* The optional external relay box enables mains backing pumps to be controlled and also provides interfaces for a turbo heater band, a backing line isolation valve and a logic bypass.
* All relay boxes include a logic bypass facility for further system integration. See website for details.
* In most instances, TIC systems may be simply and quickly configured using the range of standard cables on offer, there is therefore no need for the customer to prepare loom assemblies or relay boxes and special interfaces. TIC controllers can be bench or rack mounted.
* TIC is packaged in a compact case and may be panel or rack (¼ 19" rack 3U) mounted. With the addition of the bezel it becomes an attractive bench-top instrument.
* The large 128 x 64 pixel backlit graphics LCD and mobile phone style menu system simplifies programming and with a choice of summary screens excellent visibility of displayed parameters is assured.
* TIC will operate from mains supplies with voltages between 90 and 264 V ac, and frequencies between 47 and 63 Hz. No user intervention being required.
* To enable complete integration into PC and PLC controlled processes, all TIC variants include RS232 and RS485 interfaces as standard.
* TIC is supplied with a new Windows™ PC program which enables full setup and control from a PC, using the RS232 interface.
* As new compatible products are released, TIC software may be simply upgraded using the special utility supplied with the Windows™ PC program. TIC software upgrades will be made available via e-mail and the Internet.
|
|
|
|
|
|
| Characteristics: |
* TIC automatically recognizes and controls one 24 V turbomolecular pump from either the DX or EXDC ranges. DX turbos have full serial communication with TIC and may be both configured and report status via TIC.
* Both mains and 24 V backing pumps may be controlled by TIC. For larger vacuum systems the TIC may control mains backing pumps, including XDS10 and up to RV12, via the optional relay box.
* The optional external relay box enables mains backing pumps to be controlled and also provides interfaces for a turbo heater band, a backing line isolation valve and a logic bypass.
* All relay boxes include a logic bypass facility for further system integration. See website for details.
* In most instances, TIC systems may be simply and quickly configured using the range of standard cables on offer, there is therefore no need for the customer to prepare loom assemblies or relay boxes and special interfaces. TIC controllers can be bench or rack mounted.
* TIC is packaged in a compact case and may be panel or rack (¼ 19" rack 3U) mounted. With the addition of the bezel it becomes an attractive bench-top instrument.
* The large 128 x 64 pixel backlit graphics LCD and mobile phone style menu system simplifies programming and with a choice of summary screens excellent visibility of displayed parameters is assured.
* TIC will operate from mains supplies with voltages between 90 and 264 V ac, and frequencies between 47 and 63 Hz. No user intervention being required.
* To enable complete integration into PC and PLC controlled processes, all TIC variants include RS232 and RS485 interfaces as standard.
* TIC is supplied with a new Windows™ PC program which enables full setup and control from a PC, using the RS232 interface.
* As new compatible products are released, TIC software may be simply upgraded using the special utility supplied with the Windows™ PC program. TIC software upgrades will be made available via e-mail and the Internet.
|
|
|
|
|
|
| Characteristics: |
* TIC automatically recognizes and controls one 24 V turbomolecular pump from either the DX or EXDC ranges. DX turbos have full serial communication with TIC and may be both configured and report status via TIC.
* Both mains and 24 V backing pumps may be controlled by TIC. For larger vacuum systems the TIC may control mains backing pumps, including XDS10 and up to RV12, via the optional relay box.
* The optional external relay box enables mains backing pumps to be controlled and also provides interfaces for a turbo heater band, a backing line isolation valve and a logic bypass.
* All relay boxes include a logic bypass facility for further system integration. See website for details.
* In most instances, TIC systems may be simply and quickly configured using the range of standard cables on offer, there is therefore no need for the customer to prepare loom assemblies or relay boxes and special interfaces. TIC controllers can be bench or rack mounted.
* TIC is packaged in a compact case and may be panel or rack (¼ 19" rack 3U) mounted. With the addition of the bezel it becomes an attractive bench-top instrument.
* The large 128 x 64 pixel backlit graphics LCD and mobile phone style menu system simplifies programming and with a choice of summary screens excellent visibility of displayed parameters is assured.
* TIC will operate from mains supplies with voltages between 90 and 264 V ac, and frequencies between 47 and 63 Hz. No user intervention being required.
* To enable complete integration into PC and PLC controlled processes, all TIC variants include RS232 and RS485 interfaces as standard.
* TIC is supplied with a new Windows™ PC program which enables full setup and control from a PC, using the RS232 interface.
* As new compatible products are released, TIC software may be simply upgraded using the special utility supplied with the Windows™ PC program. TIC software upgrades will be made available via e-mail and the Internet.
|
|
|
|
|
|
| Characteristics: |
* TIC automatically recognizes and controls one 24 V turbomolecular pump from either the DX or EXDC ranges. DX turbos have full serial communication with TIC and may be both configured and report status via TIC.
* Both mains and 24 V backing pumps may be controlled by TIC. For larger vacuum systems the TIC may control mains backing pumps, including XDS10 and up to RV12, via the optional relay box.
* The optional external relay box enables mains backing pumps to be controlled and also provides interfaces for a turbo heater band, a backing line isolation valve and a logic bypass.
* All relay boxes include a logic bypass facility for further system integration. See website for details.
* In most instances, TIC systems may be simply and quickly configured using the range of standard cables on offer, there is therefore no need for the customer to prepare loom assemblies or relay boxes and special interfaces. TIC controllers can be bench or rack mounted.
* TIC is packaged in a compact case and may be panel or rack (¼ 19" rack 3U) mounted. With the addition of the bezel it becomes an attractive bench-top instrument.
* The large 128 x 64 pixel backlit graphics LCD and mobile phone style menu system simplifies programming and with a choice of summary screens excellent visibility of displayed parameters is assured.
* TIC will operate from mains supplies with voltages between 90 and 264 V ac, and frequencies between 47 and 63 Hz. No user intervention being required.
* To enable complete integration into PC and PLC controlled processes, all TIC variants include RS232 and RS485 interfaces as standard.
* TIC is supplied with a new Windows™ PC program which enables full setup and control from a PC, using the RS232 interface.
* As new compatible products are released, TIC software may be simply upgraded using the special utility supplied with the Windows™ PC program. TIC software upgrades will be made available via e-mail and the Internet.
|
|
|
|
|
|
| Characteristics: |
Compatiblity:
Edwards Turbo Pumps:
* EXT 70,
* EXT 70H,
* EXT 255H.
|
|
|
|
|
|
| Characteristics: |
Features and Benefits
* Switched-mode power supplies which automatically adjust to any electrical supply.
* Electromagnetic compatibility which exceeds the requirements of the European generic immunity and emission standards.
* Regenerative power supply which provides vent-valve control options.
* Rear panel sockets for vent-valve, air-cooler and active vacuum gauge.
* Full remote control. Standby and bakeout band control from front panel.
* User selectable ‘normal’ speed and time-out settings.
* 0-5 V d.c. analog output proportional to turbomolecular pump rotational speed.
Control functions available:
* Manual control
* Remote control
* Standby
* Bakeout band front panel switch
* Rotary pump switching relay
* Hours counter
Display functions available:
* Electrical supply
* Speed (4 segment bar graph)
* Pump on
* Pump awaiting interlock
* Standby on
* Bakeout band on (pump normal)
Compatible turbomolecular pumps:
* EXT255H
* EXT555H Series
Direct connection possible for:
* ACX air cooler
* TAV vent-valve
* BX bakeout band
* Rotary pump switching
* Active gauge
|
|
|
| |
