Sales and Service
855 882 2886
0 Items
$0.00
Find us on:
Main Categories

- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: Leak Detector Accessories
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 12 products
Item#: PN16853 Mfr Part#: 252003 Manufacturer: Leybold
PRICE: $2,150.00
WEB SAVINGS: $20.00
YOU PAY: $2,130.00

Oerlikon / Leybold Sniffer Line SL 300 For PhoeniXL Leak Detectors, 252003

 

Leybold Sniffer Line SL 300 Overview:


The PhoeniXL is a leak detector for Helium or Hydrogen. This instrument may be used to detect the location and the size of leaks on objects under test in two different ways:

  • When the test sample has been evacuated first and is sprayed with helium on the outside. It is required that a vacuum connection is provided between the PhoeniXL and the test sample (vacuum mode).
  • When a helium overpressure is provided in the test sample and the test sample is searched from the outside with a sniffer probe which is attached to the inlet port (sniffer mode).

The PhoeniXL is to be used for leak detection only. It must not be used as a pumping system (esp. pumping aggressive or humid gases.)

Pumping condensable gases and steams: When pumping test sample water vapour that is inside the test object can attain to the fore pump. With the water vapor that is in the air - especially in humid areas or when using humid or wet test samples - the acceptable compatibility of water vapor or capacity of water vapor respectively can be exceeded.

The steam in the oil of the pump condeses when the water vapor rises over the acceptable value. So the attribute of the oil changes and danger of corrosion occures for the pump.

While using the leak detector with condensable gases and steams the oil of the fore pump has to be controlled regularly. So you can recognize a condensation of water vapor in the pump. Usually the oil is light and lucent. When water vapor is inside it gets blear and milky at operating state temperature.

When turning the pump off water vapor condensates and raises the part of water in the oil.

The leak detector must not directly be switched off after the process, in which condensable gases or steams are pumped, is finished. It must be running (at least 20 minutes) with opend gas ballast valve until the oil of the pump is freed from detached steam.

 


Condition: New In Stock
Item#: PN20341 Mfr Part#: 20028656 Manufacturer: Leybold
PRICE: $165.00
WEB SAVINGS: $25.01
YOU PAY: $139.99

Exhaust Oil Filter for Phoenix L300i, HLT 560 Helium Leak Detector, 20028656

 

After using the PHOENIX L300i or HLT 560 Leak Detector for a longer time there can be oil accumulated from
the pump. In this case please reffer to your operation manual for instructions.

 

Leybold Phoenix L300i Applications:

 

  • Quality Assurance
  • Ideal Tool for industrial series production testing
  • Automotive Industry
  • Analytical Instruments
  • Systems Manufacture
  • Power Station Engineering
  • Research and Development
  • Semiconductor Industry
  • High Vacuum and Ultra-High Vacuum Engineering

 

Phoenix L300i Product Highlights:

  • Most compact unit in class
  • Quick start up (<2 min)
  • Extremly fast responce
  • High sensitivity
  • Most robust and reliable ion source
  • Flexable application areas
  • Maximum mobility due to the wireless remote control RC 310 WL

 

Phoenix L300i Customer Benefits;

  • Lowest detectable leak rate for helium <5 x 10-12 mbar l/s
  • Leak detection starting at an inlet pressure of 15 mbar
  • Short He recovering time (<5 min. )
  • 10 display languages selectable
  • Switchable for the detection of H2, 3He, and He
  • Helium background suppression upon single key press (Auto-Zero)
  • Trend /bargraph leak rate display
  • Oil-sealed or dry compresing backing pumps for rapidevacuation of the device under test and for producing a high gas flow in the sniffer mode
  • The optimised valve block ensures a significaly reduced recovery time after suffering helium contamination and high pumping speed at inlet.

 

PHOENIX Leak Detector Set-up and options:

  • PHOENIX L300i / Oil sealed vacuum system. Optimazed leak detector for most standard applications (Ordering PN17214 / 251000V01)
  • PHOENIX L300i Dry / Entirely oil-free vacuum system. Integrated helium contamination protection. (Ordering PN17215 / 251001V01)
  • PHOENIX L300i Modul / Additional forevacuum system oil-sealed or dry, depending on the application. For applications involvingshort cycles and/or testing of large volumes.
  • PHOENIX L300i Cart / Modular and mobile system; The Leybold PHOENIX L300i is configured according to customers needs.

 

Supperior Design Characteristics:

  • Phoenix L300i offers angled operating panel for easy visibility of the instrument status
  • Oil Level glass at the housing for simple oil level checks.
  • Extremly long service life of the cathodes due to their Iridium/Yttrium coating.

 

 

 

 


A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Phoenix L300i Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Vacuum Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

 


Condition: New In Stock
Item#: PN20442 Mfr Part#: 20099026 Manufacturer: Leybold
PRICE: $169.00
WEB SAVINGS: $40.00
YOU PAY: $129.00

Leybold Filter Holder for UL 200 /Phoenix L300i Helium Leak Detector, 20099026

 

Please reffer to your operation manual for instructions.

 

Leybold Phoenix L300i Applications:

 

  • Quality Assurance
  • Ideal Tool for industrial series production testing
  • Automotive Industry
  • Analytical Instruments
  • Systems Manufacture
  • Power Station Engineering
  • Research and Development
  • Semiconductor Industry
  • High Vacuum and Ultra-High Vacuum Engineering

 

Phoenix L300i Product Highlights:

  • Most compact unit in class
  • Quick start up (<2 min)
  • Extremly fast responce
  • High sensitivity
  • Most robust and reliable ion source
  • Flexable application areas
  • Maximum mobility due to the wireless remote control RC 310 WL

 

Phoenix L300i Customer Benefits;

  • Lowest detectable leak rate for helium <5 x 10-12 mbar l/s
  • Leak detection starting at an inlet pressure of 15 mbar
  • Short He recovering time (<5 min. )
  • 10 display languages selectable
  • Switchable for the detection of H2, 3He, and He
  • Helium background suppression upon single key press (Auto-Zero)
  • Trend /bargraph leak rate display
  • Oil-sealed or dry compresing backing pumps for rapidevacuation of the device under test and for producing a high gas flow in the sniffer mode
  • The optimised valve block ensures a significaly reduced recovery time after suffering helium contamination and high pumping speed at inlet.

 

PHOENIX Leak Detector Set-up and options:

  • PHOENIX L300i / Oil sealed vacuum system. Optimazed leak detector for most standard applications (Ordering PN17214 / 251000V01)
  • PHOENIX L300i Dry / Entirely oil-free vacuum system. Integrated helium contamination protection. (Ordering PN17215 / 251001V01)
  • PHOENIX L300i Modul / Additional forevacuum system oil-sealed or dry, depending on the application. For applications involvingshort cycles and/or testing of large volumes.
  • PHOENIX L300i Cart / Modular and mobile system; The Leybold PHOENIX L300i is configured according to customers needs.

 

Supperior Design Characteristics:

  • Phoenix L300i offers angled operating panel for easy visibility of the instrument status
  • Oil Level glass at the housing for simple oil level checks.
  • Extremly long service life of the cathodes due to their Iridium/Yttrium coating.

 

 

 

 


A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Phoenix L300i Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Vacuum Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

 


Condition: New In Stock
Item#: PN20443 Mfr Part#: 200001366 Manufacturer: Leybold
PRICE: $118.00
WEB SAVINGS: $31.00
YOU PAY: $87.00

Leybold Filter Pad for UL 200 /Phoenix L300i Helium Leak Detector, 200001366 (5 pcs.)

 

Please reffer to your operation manual for instructions.

 

Leybold Phoenix L300i Applications:

 

  • Quality Assurance
  • Ideal Tool for industrial series production testing
  • Automotive Industry
  • Analytical Instruments
  • Systems Manufacture
  • Power Station Engineering
  • Research and Development
  • Semiconductor Industry
  • High Vacuum and Ultra-High Vacuum Engineering

 

Phoenix L300i Product Highlights:

  • Most compact unit in class
  • Quick start up (<2 min)
  • Extremly fast responce
  • High sensitivity
  • Most robust and reliable ion source
  • Flexable application areas
  • Maximum mobility due to the wireless remote control RC 310 WL

 

Phoenix L300i Customer Benefits;

  • Lowest detectable leak rate for helium <5 x 10-12 mbar l/s
  • Leak detection starting at an inlet pressure of 15 mbar
  • Short He recovering time (<5 min. )
  • 10 display languages selectable
  • Switchable for the detection of H2, 3He, and He
  • Helium background suppression upon single key press (Auto-Zero)
  • Trend /bargraph leak rate display
  • Oil-sealed or dry compresing backing pumps for rapidevacuation of the device under test and for producing a high gas flow in the sniffer mode
  • The optimised valve block ensures a significaly reduced recovery time after suffering helium contamination and high pumping speed at inlet.

 

PHOENIX Leak Detector Set-up and options:

  • PHOENIX L300i / Oil sealed vacuum system. Optimazed leak detector for most standard applications (Ordering PN17214 / 251000V01)
  • PHOENIX L300i Dry / Entirely oil-free vacuum system. Integrated helium contamination protection. (Ordering PN17215 / 251001V01)
  • PHOENIX L300i Modul / Additional forevacuum system oil-sealed or dry, depending on the application. For applications involvingshort cycles and/or testing of large volumes.
  • PHOENIX L300i Cart / Modular and mobile system; The Leybold PHOENIX L300i is configured according to customers needs.

 

Supperior Design Characteristics:

  • Phoenix L300i offers angled operating panel for easy visibility of the instrument status
  • Oil Level glass at the housing for simple oil level checks.
  • Extremly long service life of the cathodes due to their Iridium/Yttrium coating.

 

 

 

 


A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Phoenix L300i Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Vacuum Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

 


Condition: New In Stock
Item#: PN22945 Mfr Part#: 16 555 / 16555 Manufacturer: Leybold
PRICE: $545.00
WEB SAVINGS: $45.01
YOU PAY: $499.99

Leybold Edwards Helium Spray Gun, for ELD 500, Phoenix, Quadro and Vario Helium Leak Detectors, 5m PVC hose, 16 555

 

Leybold / Edwards Search Gas Overview:


The Leybold / Edwards Search Gas Spray Gun 16555 comes complete with a spray gun, nozzle, and PVC hosing.

Leybold's Helium Spray Gun is designed for well aimed spraying of search gases to detect potential leaks in your system. This spray gun should be used for the local testing of evacuated objects.

This 16 555 search gas spray gun works well with the new Leybold Phoenix Quadro Leak Detector 250001V02. 


Condition: New In Stock
Item#: PN16240 Mfr Part#: 252002 Manufacturer: Leybold
PRICE: $0.00
YOU PAY: $1,950.00

Oerlikon / Leybold PhoeniXL Remote Control For PhoeniXL Leak Detectors, 4m Cable, 252002

 

Leybold PhoeniXL Remote Control Overview:


The PhoeniXL is a leak detector for Helium or Hydrogen. This instrument may be used to detect the location and the size of leaks on objects under test in two different ways:

  • When the test sample has been evacuated first and is sprayed with helium on the outside. It is required that a vacuum connection is provided between the PhoeniXL and the test sample (vacuum mode).
  • When a helium overpressure is provided in the test sample and the test sample is searched from the outside with a sniffer probe which is attached to the inlet port (sniffer mode).

The PhoeniXL is to be used for leak detection only. It must not be used as a pumping system (esp. pumping aggressive or humid gases.)

Pumping condensable gases and steams: When pumping test sample water vapour that is inside the test object can attain to the fore pump. With the water vapor that is in the air - especially in humid areas or when using humid or wet test samples - the acceptable compatibility of water vapor or capacity of water vapor respectively can be exceeded. The steam in the oil of the pump condeses when the water vapor rises over the acceptable value. So the attribute of the oil changes and danger of corrosion occures for the pump.

While using the leak detector with condensable gases and steams the oil of the fore pump has to be controlled regularly. So you can recognize a condensation of water vapor in the pump. Usually the oil is light and lucent. When water vapor is inside it gets blear and milky at operating state temperature. When turning the pump off water vapor condensates and raises the part of water in the oil.

The leak detector must not directly be switched off after the process, in which condensable gases or steams are pumped, is finished. It must be running (at least 20 minutes) with opend gas ballast valve until the oil of the pump is freed from detached steam.


Condition: Remanufactured Call us for Availability
Item#: PN19973 Mfr Part#: 252005 Manufacturer: Pfeiffer Vacuum
PRICE: $1,895.00
WEB SAVINGS: $345.00
YOU PAY: $1,550.00

Leybold Transport Cart for the Phoenix L300i Helium Leak Detector, 252005


Cart equipped with roling casters, and helium bottle straps.


Condition: New
Item#: PN20193 Mfr Part#: 252013V01 Manufacturer: Leybold
PRICE: $3,255.00
WEB SAVINGS: $159.00
YOU PAY: $3,096.00

Leybold RC310C Wired Remote Control for Phoenix L300i Helium Leak Detector, 252013V01, also known as Oerlikon RC 310C Model

 


Leybold RC310C Hand Held Wired Remote controller enables Phoenix Leak Detector user to step away from the Helium Leak Detector and be able to control leak testing and to view screen with Leak Rate reading.

Leybold RC 310C is a compact, light weight and easy to use Remote control with bright and clear display.

The RC310 Remote Control has been design to operate the following Leak Detectors;

Phoenix L300i

Phoenix L300

Phoenix L200

The former wired remote control P/N 252002 can be replaced by the Leybold RC310 Controler.

Supplied Equipment:

  • Remote Control / 252013V01
  • Connection Cable 4 m
  • Wall Plug in power supply (for integrated battery)
  • Radio Transmitter
  • Connection Cable for radio transmitter
  • Operating Instructions

 

RC310C Remote Control is designed for Leybold Phoenix L300i Helium Leak Detector which is the next Generation in Helium Leak Testing. Phoenix L300i Helium Leak Detector opens up new domensions of productivity and reliability for your applications.

The Leybold Phoenix L300i is a portable multipurpose helium leak detector and equally well suited to both service and series production testing. The rugged modular design and its ease of use make the Phoenix L300i one of the most user-friendly leak detectors in its class.

 

Leybold Helium Leak Detectors permit the localization of leaks and the quantitative determination of the leak rate. In practice the leak detector performs this task by firstly evacuating the part which is to be tested, so that gas from the outside may enter through an existing leak due to the pressure difference present. If only helium is brought in front of the leak (for example by using a spray gun) this helium flows through the leak and is pumped out by the leak detector. The helium partial pressure present in the leak detector is measured by a sector mass spectrometer and is displayed as a leak rate. This is usually given in terms of volume flow of the helium.

 

Leybold Phoenix L300i Applications:

  • Quality Assurance
  • Ideal Tool for industrial series production testing
  • Automotive Industry
  • Analytical Instruments
  • Systems Manufacture
  • Power Station Engineering
  • Research and Development
  • Semiconductor Industry
  • High Vacuum and Ultra-High Vacuum Engineering

 

Phoenix L300i Product Highlights:

  • Most compact unit in class
  • Quick start up (<2 min)
  • Extremly fast responce
  • High sensitivity
  • Most robust and reliable ion source
  • Flexable application areas
  • Maximum mobility due to the wireless remote control RC 310 WL

 

Phoenix L300i Customer Benefits;

  • Lowest detectable leak rate for helium <5 x 10-12 mbar l/s
  • Leak detection starting at an inlet pressure of 15 mbar
  • Short He recovering time (<5 min. )
  • 10 display languages selectable
  • Switchable for the detection of H2, 3He, and He
  • Helium background suppression upon single key press (Auto-Zero)
  • Trend /bargraph leak rate display
  • Oil-sealed or dry compresing backing pumps for rapidevacuation of the device under test and for producing a high gas flow in the sniffer mode
  • The optimised valve block ensures a significaly reduced recovery time after suffering helium contamination and high pumping speed at inlet.

 

PHOENIX Leak Detector Set-up and options:

  • PHOENIX L300i / Oil sealed vacuum system. Optimazed leak detector for most standard applications (Ordering PN17214 / 251000V01)
  • PHOENIX L300i Dry / Entirely oil-free vacuum system. Integrated helium contamination protection. (Ordering PN17215 / 251001V01)
  • PHOENIX L300i Modul / Additional forevacuum system oil-sealed or dry, depending on the application. For applications involvingshort cycles and/or testing of large volumes.
  • PHOENIX L300i Cart / Modular and mobile system; The Leybold PHOENIX L300i is configured according to customers needs.

 

Supperior Design Characteristics:

  • Phoenix L300i offers angled operating panel for easy visibility of the instrument status
  • Oil Level glass at the housing for simple oil level checks.
  • Extremly long service life of the cathodes due to their Iridium/Yttrium coating.

 

 

 

 


A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Phoenix L300i Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Vacuum Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: New
Item#: PN20194 Mfr Part#: 252014V01 Manufacturer: Leybold
PRICE: $3,500.00
WEB SAVINGS: $330.01
YOU PAY: $3,169.99

Leybold RC310WL Wireless Remote Control for Phoenix L300i Helium Leak Detector, 252013V01, also known as Oerlikon RC310WL Model

 


Leybold RC310C Hand Held Wireless Remote controller enables Phoenix Leak Detector user to step away from the Helium Leak Detector and be able to control leak testing and to view screen with Leak Rate reading.

Leybold RC 310C is a compact, light weight and easy to use Remote control with bright and clear display.

Wireless Range >100 m in free field

The RC310 Remote Control has been design to operate the following Leak Detectors;

Phoenix L300i

Phoenix L300

Phoenix L200

The former wired remote control P/N 252002 can be replaced by the Leybold RC310 Controler.

Supplied Equipment:

  • Remote Control / 252014V01
  • Connection Cable 4 m
  • Wall Plug in power supply (for integrated battery)
  • Radio Transmitter
  • Connection Cable for radio transmitter
  • Operating Instructions

 

RC310C Remote Control is designed for Leybold Phoenix L300i Helium Leak Detector which is the next Generation in Helium Leak Testing. Phoenix L300i Helium Leak Detector opens up new domensions of productivity and reliability for your applications.

The Leybold Phoenix L300i is a portable multipurpose helium leak detector and equally well suited to both service and series production testing. The rugged modular design and its ease of use make the Phoenix L300i one of the most user-friendly leak detectors in its class.

 

Leybold Helium Leak Detectors permit the localization of leaks and the quantitative determination of the leak rate. In practice the leak detector performs this task by firstly evacuating the part which is to be tested, so that gas from the outside may enter through an existing leak due to the pressure difference present. If only helium is brought in front of the leak (for example by using a spray gun) this helium flows through the leak and is pumped out by the leak detector. The helium partial pressure present in the leak detector is measured by a sector mass spectrometer and is displayed as a leak rate. This is usually given in terms of volume flow of the helium.

 

Leybold Phoenix L300i Applications:

  • Quality Assurance
  • Ideal Tool for industrial series production testing
  • Automotive Industry
  • Analytical Instruments
  • Systems Manufacture
  • Power Station Engineering
  • Research and Development
  • Semiconductor Industry
  • High Vacuum and Ultra-High Vacuum Engineering

 

Phoenix L300i Product Highlights:

  • Most compact unit in class
  • Quick start up (<2 min)
  • Extremly fast responce
  • High sensitivity
  • Most robust and reliable ion source
  • Flexable application areas
  • Maximum mobility due to the wireless remote control RC 310 WL

 

Phoenix L300i Customer Benefits;

  • Lowest detectable leak rate for helium <5 x 10-12 mbar l/s
  • Leak detection starting at an inlet pressure of 15 mbar
  • Short He recovering time (<5 min. )
  • 10 display languages selectable
  • Switchable for the detection of H2, 3He, and He
  • Helium background suppression upon single key press (Auto-Zero)
  • Trend /bargraph leak rate display
  • Oil-sealed or dry compresing backing pumps for rapidevacuation of the device under test and for producing a high gas flow in the sniffer mode
  • The optimised valve block ensures a significaly reduced recovery time after suffering helium contamination and high pumping speed at inlet.

 

PHOENIX Leak Detector Set-up and options:

  • PHOENIX L300i / Oil sealed vacuum system. Optimazed leak detector for most standard applications (Ordering PN17214 / 251000V01)
  • PHOENIX L300i Dry / Entirely oil-free vacuum system. Integrated helium contamination protection. (Ordering PN17215 / 251001V01)
  • PHOENIX L300i Modul / Additional forevacuum system oil-sealed or dry, depending on the application. For applications involvingshort cycles and/or testing of large volumes.
  • PHOENIX L300i Cart / Modular and mobile system; The Leybold PHOENIX L300i is configured according to customers needs.

 

Supperior Design Characteristics:

  • Phoenix L300i offers angled operating panel for easy visibility of the instrument status
  • Oil Level glass at the housing for simple oil level checks.
  • Extremly long service life of the cathodes due to their Iridium/Yttrium coating.

 

 

 

 


A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Phoenix L300i Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Vacuum Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

 


Condition: New
Item#: PN16854 Mfr Part#: 252003 Manufacturer: Leybold
PRICE: $1,129.40
WEB SAVINGS: $22.15
YOU PAY: $1,107.25

Demo Unit Oerlikon / Leybold Sniffer Line SL 300 For PhoeniXL Leak Detectors, 252003

 

Leybold Sniffer Line SL 300 Overview:


The PhoeniXL is a leak detector for Helium or Hydrogen. This instrument may be used to detect the location and the size of leaks on objects under test in two different ways:

  • When the test sample has been evacuated first and is sprayed with helium on the outside. It is required that a vacuum connection is provided between the PhoeniXL and the test sample (vacuum mode).
  • When a helium overpressure is provided in the test sample and the test sample is searched from the outside with a sniffer probe which is attached to the inlet port (sniffer mode).

The PhoeniXL is to be used for leak detection only. It must not be used as a pumping system (esp. pumping aggressive or humid gases.)

Pumping condensable gases and steams: When pumping test sample water vapour that is inside the test object can attain to the fore pump. With the water vapor that is in the air - especially in humid areas or when using humid or wet test samples - the acceptable compatibility of water vapor or capacity of water vapor respectively can be exceeded.

The steam in the oil of the pump condeses when the water vapor rises over the acceptable value. So the attribute of the oil changes and danger of corrosion occures for the pump.

While using the leak detector with condensable gases and steams the oil of the fore pump has to be controlled regularly. So you can recognize a condensation of water vapor in the pump. Usually the oil is light and lucent. When water vapor is inside it gets blear and milky at operating state temperature.

When turning the pump off water vapor condensates and raises the part of water in the oil.

The leak detector must not directly be switched off after the process, in which condensable gases or steams are pumped, is finished. It must be running (at least 20 minutes) with opend gas ballast valve until the oil of the pump is freed from detached steam.

 


Condition: Demo Out of Stock
Contact
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.