phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
Main Categories

- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: New Turbo Pumping Stations
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 29 products
Item#: PN00251 Mfr Part#: G8702A-021 Manufacturer: Agilent Technologies / Varian
Price upon request

Overview:

The TPS Compact Pumping System consists of a pump with an integrated controller and a forepump. The TPS Compact Pumping System is available in sixteen models which differ in the TPM size, high vacuum flange and voltage.

The turbopump consists of a high frequency motor driving a turbine fitted with many bladed stages and Macrotorr stages. The turbine rotates in a counter clockwise direction when viewed from the high vacuum flange end. The turbine is made of high-strength, light aluminium alloy, and is machined from a single block of aluminium. The turbine blades have five different angles, from 44° to 12°, while the Macrotorr stages are in the form of discs. The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump. The static blades of the stator are fabricated in stainless steel. These are supported and accurately positioned by spacer rings. The Macrotorr stators are in the form of self-positioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are fabricated in aluminium alloy. During normal operation, the motor functions with a power feed at 54 Vac three-phase at 1330 Hz (TV81M) or 963 Hz (TV301). To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio. A thermistor sensor is mounted near the upper bearing to prevent the pump from overheating. The pump is balanced after assembly with a residual vibration amplitude less than 0.01?m.

The integrated controller is a solid-state frequency converter which is driven by a single chip microcomputer and is composed of a PCB which includes a power supply with a 3-phase AC output, analog and input/output section, microprocessor and digital section. The controller recognizes the mains presence and converts the single phase AC mains supply into a 3-phase, medium frequency output which is required to power the pump. The controller can be operated by a remote host computer via the serial connection.

The TPS Compact internal scroll creates vacuum using a simple dual scroll mechanism in which one of the nested scrolls orbits about the other, creating moving zones of captured gas. Gas enters the scroll set at the perimeter and is displaced and compressed toward the center hub where it is exhausted.

Benefits:

  • Designed for demanding applications
  • Cost-effective pumping solution
  • Can be used world-wide
  • Easy to use plug and play system
  • Complies with world-wide safety standards
  • Easy system pressure measurement
  • Easy Tip-seal replacement
  • Excellent base pressure up to 10-9 mbar
  • Easy to be moved in small space

 

 

 

 


Condition: New
Item#: PN18538 Mfr Part#: X3580A-011-023-120 Manufacturer: Agilent Technologies / Varian
Price upon request

Agilent TPS Compact Pumping Station with TwisTorr 304 FS Turbo Vacuum Pump, 120 V, ISO 100, X3580A-011-023-120

The Agilent TPS Compact Pumping Stations is a portable, fully integrated, hydrocarbon free pumping system powered by the TwisTorr FS Turbo pump and backed by the IDP-3 Dry Scroll Pump.

It is a cost effective pumping solution with a large pressure display and Active Gauge capability.

Features:

  • TwisTorr 304 FS Turbo Pump
  • IDP-3 Dry Scroll Pump
  • Compact, Light, Dry, Clean and Robust
  • RS-232 or Analogical Communiction
  • Wide Range Vacuum Gauge Driving Capability
  • Large Pressure Data Display
  • Pressure Driven Set Point, Analog Set Point
  • Wheels Option Available

Benefits

  • Designed for demanding applications
  • Cost-effective pumping solution
  • Easy to use
  • Complies with world-wide safety standards
  • Easy system pressure measurement
  • Easy tip-seal replacement
  • Easy to be moved

Condition: New
Item#: PN07108 Mfr Part#: G8702A-020 Manufacturer: Agilent Technologies / Varian
Price upon request

Overview:

The TPS Compact Pumping System consists of a pump with an integrated controller and a forepump. The TPS Compact Pumping System is available in sixteen models which differ in the TPM size, high vacuum flange and voltage.

The turbopump consists of a high frequency motor driving a turbine fitted with many bladed stages and Macrotorr stages. The turbine rotates in a counter clockwise direction when viewed from the high vacuum flange end. The turbine is made of high-strength, light aluminium alloy, and is machined from a single block of aluminium. The turbine blades have five different angles, from 44° to 12°, while the Macrotorr stages are in the form of discs. The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump. The static blades of the stator are fabricated in stainless steel. These are supported and accurately positioned by spacer rings. The Macrotorr stators are in the form of self-positioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are fabricated in aluminium alloy. During normal operation, the motor functions with a power feed at 54 Vac three-phase at 1330 Hz (TV81M) or 963 Hz (TV301). To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio. A thermistor sensor is mounted near the upper bearing to prevent the pump from overheating. The pump is balanced after assembly with a residual vibration amplitude less than 0.01?m.

The integrated controller is a solid-state frequency converter which is driven by a single chip microcomputer and is composed of a PCB which includes a power supply with a 3-phase AC output, analog and input/output section, microprocessor and digital section. The controller recognizes the mains presence and converts the single phase AC mains supply into a 3-phase, medium frequency output which is required to power the pump. The controller can be operated by a remote host computer via the serial connection.

The TPS Compact internal scroll creates vacuum using a simple dual scroll mechanism in which one of the nested scrolls orbits about the other, creating moving zones of captured gas. Gas enters the scroll set at the perimeter and is displaced and compressed toward the center hub where it is exhausted.

Benefits:

  • Designed for demanding applications
  • Cost-effective pumping solution
  • Can be used world-wide
  • Easy to use plug and play system
  • Complies with world-wide safety standards
  • Easy system pressure measurement
  • Easy Tip-seal replacement
  • Excellent base pressure up to 10-9 mbar
  • Easy to be moved in small space

 

 

 

 


Condition: New
Item#: PN18539 Mfr Part#: X3580A-011-024-120 Manufacturer: Agilent Technologies / Varian
Price upon request

Agilent TPS Compact Pumping Station with TwisTorr 304 FS Turbo Vacuum Pump, 120 V, CFF 6", X3580A-011-024-120

The Agilent TPS Compact Pumping Stations is a portable, fully integrated, hydrocarbon free pumping system powered by the TwisTorr FS Turbo pump and backed by the IDP-3 Dry Scroll Pump. X3580A011024120

It is a cost effective pumping solution with a large pressure display and Active Gauge capability.

Features:

  • TwisTorr 304 FS Turbo Pump
  • IDP-3 Dry Scroll Pump
  • Compact, Light, Dry, Clean and Robust
  • RS-232 or Analogical Communiction
  • Wide Range Vacuum Gauge Driving Capability
  • Large Pressure Data Display
  • Pressure Driven Set Point, Analog Set Point
  • Wheels Option Available

Benefits

  • Designed for demanding applications
  • Cost-effective pumping solution
  • Easy to use
  • Complies with world-wide safety standards
  • Easy system pressure measurement
  • Easy tip-seal replacement
  • Easy to be moved

Condition: New
Item#: PN07110 Mfr Part#: G8702A-022 Manufacturer: Agilent Technologies / Varian
Price upon request

Overview:

The TPS Compact Pumping System consists of a pump with an integrated controller and a forepump. The TPS Compact Pumping System is available in sixteen models which differ in the TPM size, high vacuum flange and voltage.

The turbopump consists of a high frequency motor driving a turbine fitted with many bladed stages and Macrotorr stages. The turbine rotates in a counter clockwise direction when viewed from the high vacuum flange end. The turbine is made of high-strength, light aluminium alloy, and is machined from a single block of aluminium. The turbine blades have five different angles, from 44° to 12°, while the Macrotorr stages are in the form of discs. The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump. The static blades of the stator are fabricated in stainless steel. These are supported and accurately positioned by spacer rings. The Macrotorr stators are in the form of self-positioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are fabricated in aluminium alloy. During normal operation, the motor functions with a power feed at 54 Vac three-phase at 1330 Hz (TV81M) or 963 Hz (TV301). To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio. A thermistor sensor is mounted near the upper bearing to prevent the pump from overheating. The pump is balanced after assembly with a residual vibration amplitude less than 0.01?m.

The integrated controller is a solid-state frequency converter which is driven by a single chip microcomputer and is composed of a PCB which includes a power supply with a 3-phase AC output, analog and input/output section, microprocessor and digital section. The controller recognizes the mains presence and converts the single phase AC mains supply into a 3-phase, medium frequency output which is required to power the pump. The controller can be operated by a remote host computer via the serial connection.

The TPS Compact internal scroll creates vacuum using a simple dual scroll mechanism in which one of the nested scrolls orbits about the other, creating moving zones of captured gas. Gas enters the scroll set at the perimeter and is displaced and compressed toward the center hub where it is exhausted.

Benefits:

  • Designed for demanding applications
  • Cost-effective pumping solution
  • Can be used world-wide
  • Easy to use plug and play system
  • Complies with world-wide safety standards
  • Easy system pressure measurement
  • Easy Tip-seal replacement
  • Excellent base pressure up to 10-9 mbar
  • Easy to be moved in small space

 

 

 

 


Condition: New
Item#: PN18540 Mfr Part#: X3580A-011-025-120 Manufacturer: Agilent Technologies / Varian
Price upon request

The Agilent TPS Compact Pumping Stations is a portable, fully integrated, hydrocarbon free pumping system powered by the TwisTorr FS Turbo pump and backed by the IDP-3 Dry Scroll Pump.

It is a cost effective pumping solution with a large pressure display and Active Gauge capability.

Features:

  • TwisTorr 304 FS Turbo Pump
  • IDP-3 Dry Scroll Pump
  • Compact, Light, Dry, Clean and Robust
  • RS-232 or Analogical Communiction
  • Wide Range Vacuum Gauge Driving Capability
  • Large Pressure Data Display
  • Pressure Driven Set Point, Analog Set Point
  • Wheels Option Available

Benefits

  • Designed for demanding applications
  • Cost-effective pumping solution
  • Easy to use
  • Complies with world-wide safety standards
  • Easy system pressure measurement
  • Easy tip-seal replacement
  • Easy to be moved

Condition: New
Item#: PN07248 Mfr Part#: G8701A-011-037 Manufacturer: Agilent Technologies / Varian
Price upon request

Overview:

Agilent Technologies TPS Turbo Pumping Station - Mobile, with TV301 Turbo Pump, CFF6 Inlet Flange, Triscroll 300 / TS300VPI /Scroll Pump as forepump, G8701A

The TPS-mobile front Panel is the system user interface where all controller elements are located. In particular, it contains:

  • Main Switch
    • It is a protection thermal switch able to provide electrical power to the system protecting all the devices integrated in the system against overcurrents or shortcircuits. The nominal current of the switch is fitted in according to the system configuration. By means of the Main Switch you provide power to the system activating the TMP controller and its ability to read pressure by means of an optional gauge (if connected).
  • TMP Controller
    • The integrated controller is a solid-state frequency converter which is driven by a single chip microcomputer and is composed of a PCB which includes a power supply with a 3-phase AC output, analogical and input/output section, microprocessor and digital section. The controller recognizes the mains presence and converts the single phase AC mains supply into a 3-phase, medium frequency output which is required to power the pump.
  • Pumping Selector
    • TPS-mobile versions equipped with TV81M or TV301 include an electrical selector named “Pumping” on the left side of the front panel. It is aimed to pumps management (ON/OFF). By means of “Pumping” selector you are able to start pumping; activating the pumping effect of TMP an Foreline pump. TPS-mobile equipped with TV551 is not provided with the “Pumping” selector; the same function is provided by the “ON” button of the TMP controller.
  • Gauge Control Unit (optional)
    • If needed is possible to order a special version of TPS-mobile equipped with an optional gauge controller named Varian XGS-600. By means of XGS-600 is possible to manage a couple of gauges to monitor pressure on system foreline by means of a convector gauge (1x10-3 Torr to atm) and high vacuum pressure by means of a IMG-100 (1x10-3 to 5x10-9 Torr).
  • Electrical Devices Box
    • It is a metal box containing all the electrical equipments useful to manage the vacuum components integrated in the TPS-mobile. The rear panel of the Electrical Box is equipped
      with:
      • Main socket – IEC 320 electrical socket for pumping system power cable connection (except the model 969-8433 equipped with an integrated power cable).
      • Gauge Port – Fireware connector for active gauge FRG-700 connection (see Chapter “Gauge Connector”).
  • 5m TMP and Fan Cables
    • On the rear side of Electrical Box 5 m long TMP and Fan cables are wrapped up. They are useful for the TMP and its fan and operation far from the pumping system.
  • Wheels
    • TPS-mobile is provided with four wheels allowing the system to be moved and located where vacuum is needed. Two out of four wheels are provided with a breaking system to avoid accidental moving of the pumping system during operation.
  • Foreline Pumps Description
    • TPS-mobile can be equipped both with a dry pump (scroll type) or with an oil sealed Rotary Vane Pump. TPS-mobile versions equipped with a scroll pump are free of contaminating agents and therefore are suitable for applications requiring “clean” vacuum.

Condition: New
Item#: PN18541 Mfr Part#: X3580A-011-026-120 Manufacturer: Agilent Technologies / Varian
Price upon request

The Agilent TPS Compact Pumping Stations is a portable, fully integrated, hydrocarbon free pumping system powered by the TwisTorr FS Turbo pump and backed by the IDP-3 Dry Scroll Pump.

It is a cost effective pumping solution with a large pressure display and Active Gauge capability.

Features:

  • TwisTorr 304 FS Turbo Pump
  • IDP-3 Dry Scroll Pump
  • Compact, Light, Dry, Clean and Robust
  • RS-232 or Analogical Communiction
  • Wide Range Vacuum Gauge Driving Capability
  • Large Pressure Data Display
  • Pressure Driven Set Point, Analog Set Point
  • Wheels Option Available

Benefits

  • Designed for demanding applications
  • Cost-effective pumping solution
  • Easy to use
  • Complies with world-wide safety standards
  • Easy system pressure measurement
  • Easy tip-seal replacement
  • Easy to be moved

Condition: New
Item#: PN07250 Mfr Part#: G8703A Manufacturer: Agilent Technologies / Varian
Price upon request

Agilent Technologies Mini Task AG81 Turbo Pumping System, KF40, G8703A, old part number 9699180

Overview:

The Agilent Mini-TASK AG81 pumping system consists of a pump with an integrated controller and a forepump.

Turbo Pump Description:

The turbopump consists of a high frequency motor driving a turbine fitted with 10 bladed stages and 3 Macrotorr stages. The turbine rotates in an anticlockwise direction when viewed from the high vacuum flange end.

The turbine is made of high-strength, light aluminium alloy, and is machined from a single block of aluminium. The turbine blades have five different angles, from 44° to 12°, while the Macrotorr stages are in the form of discs.

The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump.

The static blades of the stator are fabricated in stainless steel. These are supported and accurately positioned by spacer rings.

The Macrotorr stators are in the form of selfpositioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are fabricated in aluminium alloy.

During normal operation, the motor functions with a power feed at 54 Vac three-phase at 1330 Hz. To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio.

A thermistor sensor is mounted near the upper bearing to prevent the pump from overheating.

The pump is balanced after assembly with a residual vibration amplitude less than 0.01 µm.

Controller Description:

The integrated controller is a solid-state frequency converter which is driven by a single chip microcomputer and is composed of a PCB which includes a power supply with a 3-phase AC output, analog and input/output section, microprocessor and digital section. The controller recognizes the mains presence and converts the single phase AC mains supply into a 3-phase, medium frequency output which is required to power the pump.

The controller can be operated by a remote host computer via the serial connection.

Diaphragm Forepump Description:

The pump consists of an electric DC motor driving an eccentric which moves an elastic diaphragm.

The pump has four heads.

The compression chamber is hermetically separated from the drive mechanism by means of the diaphragm.

The pump transfers, evacuates and compresses completely oil-free.

The motor is supplied with a voltage of 24 Vdc.

 


Condition: New
Item#: PN07251 Mfr Part#: G8703A Manufacturer: Agilent Technologies / Varian
Price upon request

Agilent Technologies Mini Task AG81 Turbo Pumping System, ISO63, G8703A old part number 9699181

Overview:

The Agilent Mini-TASK AG81 pumping system consists of a pump with an integrated controller and a forepump.

Turbo Pump Description:

The turbopump consists of a high frequency motor driving a turbine fitted with 10 bladed stages and 3 Macrotorr stages. The turbine rotates in an anticlockwise direction when viewed from the high vacuum flange end.

The turbine is made of high-strength, light aluminium alloy, and is machined from a single block of aluminium. The turbine blades have five different angles, from 44° to 12°, while the Macrotorr stages are in the form of discs.

The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump.

The static blades of the stator are fabricated in stainless steel. These are supported and accurately positioned by spacer rings.

The Macrotorr stators are in the form of selfpositioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are fabricated in aluminium alloy.

During normal operation, the motor functions with a power feed at 54 Vac three-phase at 1330 Hz. To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio.

A thermistor sensor is mounted near the upper bearing to prevent the pump from overheating.

The pump is balanced after assembly with a residual vibration amplitude less than 0.01 µm.

Controller Description:

The integrated controller is a solid-state frequency converter which is driven by a single chip microcomputer and is composed of a PCB which includes a power supply with a 3-phase AC output, analog and input/output section, microprocessor and digital section. The controller recognizes the mains presence and converts the single phase AC mains supply into a 3-phase, medium frequency output which is required to power the pump.

The controller can be operated by a remote host computer via the serial connection.

Diaphragm Forepump Description:

The pump consists of an electric DC motor driving an eccentric which moves an elastic diaphragm.

The pump has four heads.

The compression chamber is hermetically separated from the drive mechanism by means of the diaphragm.

The pump transfers, evacuates and compresses completely oil-free.

The motor is supplied with a voltage of 24 Vdc.

 


Condition: New
Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.