Edwards Vacuum

The Edwards Turbo Pump Power Supply EPS 800 is designed to power large line of Edwards turbo Pump. EPS 800 has an output of 48 V DC with max 17.1 Amps with 800 Watts.

Edwards EPS 800 fiits the following ppumps listed below

Edwards nEXT730D
Edwards nEXT830D
Edwards nEXT1230D

The Edwards EPS 800 Power Supplly can be mounted directly on the side of the pump with option mounting bracket P/N B8J200832. EPS 800 can also be used as bench top Turbo Pump Power Supplly.

The Edwards EPS 800 requires special Mains cable (sold seperately)

A&J Vacuum services and repairs Edwards Tic Instrument, along with all other Edwards Controller and Turbo Pumps available on our website. Please contact us for additional information concerning our service program or click http://www.ajvs.com/service.php to access our Services page. We likewise offer emergency service and repair upon request. For more information, please contact A&J Vacuum Services at (973) 249-0854. Thank you for choosing AJVS as your supplier.

Condition: New In Stock

Edwards TIC Instrument Controller 200W, RS232/485, D39722000, With Support of Turbo Pump and 3 Active Vacuum Gauges

Item#: PN24546 Mfr Part#: D39722000 Manufacturer: Edwards Vacuum

PRICE: $3,925.00

WEB SAVINGS: $335.00

YOU PAY: $3,590.00

Edwards TIC Instrument Controller 200W, RS232/485, D39722000, With Support of Turbo Pump, Backing Pump and 3 Active Vacuum Gauges

Edwards TIC D39722000 Turbo Pump and Instrument Controller Overview:

The Edwards compact turbo controller with a large clear graphical display, an intuitive user interface and serial communications providing full remote control and data logging functions via a new Windows™ based PC program. The controller automatically recognizes and supports one 24 V turbomolecular pump from the EXT/nEXT range

Edwards Turbo Pump cooling and vent valve support is provided directly from the controller. Mains backing pumps (up to nXDS20i/RV12) may be controlled via an optional relay box. 2 different power variants are available, 100W or 200W which determines the ramp speed of the turbo pump.

In addition 200W models have the ability to power a 24Vdc backing pump such as our XDD1 or nXDS through a 15-way D. Turbo and instrument models add the ability to control up to 3 of our range of Active gauges (excluding IGC & Barocels).

Edwards TTI D39722000 Instrument Features:

TIC software is structured through a series of easily accessible screens, similar to a mobile telephone.
Supports 1 Turbo Pump (EXT75DX / nEXT85 / nEXT240 / nEXT300 / nEXT400)

TIC automatically recognizes which turbo is connected and displays the appropriate information on the default summary screen. Scrolling and selecting accesses the control and set-up menus for that item.

Edwards Turbo speed is shown as a proportion of full speed by a bar graph. ‘Norm’ indicates that the turbo has reached its Normal Speed, whilst forward or reverse facing chevrons indicate acceleration and deceleration.

Instrument supporting TIC variants recognize and control the following gauges: APG, APGX, ATC, ASG, AIM, WRG & AIGX. No more than one AIGX gauge may be connected to TIC at a time.

Backing pump 24 V (For mains backing pump support, see below.)
200 W turbo supporting TIC variants recognize and control the following 24 V backing pumps: XDD1

Relay box (optional)
A range of relay boxes has been developed to allow TIC to operate three 250 V a.c. 3 A (non-inductive) changeover relays, mains backing pumps and accessories.

The changeover relays are activated by the TIC set point outputs. The mains backing pump relay controls a backing line isolation valve, such that when the backing pump is switched off the isolation valve closes.
The relay box is connected to the TIC via the logic interface connector, which is also provided with a bypass connector for interfacing with OEM equipment.

Pumps status is displayed, giving a clear indication of what is currently happening in the vacuum system.

In the event of an error occurring, Edwards TIC will display either a WARNING or flash an ALARM. A warning advises of a condition outside normal parameters, requiring no action, but an alarm must be cleared before normal operation may resume.

Relay box options

TIC Relay Box Instruments
Changeover relays (3 off 250 V a.c. 3 A)
TIC Relay Box Small Backing pump
Heater band & backing line isolation valve
Small backing pump
TIC Relay Box Inst & Small Backing pump
Changeover relays (3 off 250 V a.c. 3 A)
Heater band & backing line isolation valve
Small backing pump
Compatible mains backing pumps and accessories
- Small backing pumps: E2M0.7 & 1.5, RV3, 5, 8 & 12, XDS5C & 10C, XDS5 & 10 & ESDP12
- Heater band: BX70 & BX250
- Backing line isolation valve: LCPV16EKA & LCPV25EKA

Condition: New In Stock

Edwards TIC Instrument and Pump Controller 100W, RS232, D39711000, Without Gauge Control

Item#: PN15636 Mfr Part#: D39711000 Manufacturer: Edwards Vacuum

PRICE: $1,800.00

WEB SAVINGS: $57.00

YOU PAY: $1,743.00

Edwards TIC Instrument and Pump Controller 100W,

RS232, D39711000, Without Gauge Control

Edwards TIC D39711000 Turbo Pump and Instrument Controller Overview:

Edwards Tic Instrument Features:

TIC software is structured through a series of easily accessible screens, similar to a mobile telephone.
Supports 1 Turbo Pump (EXT75DX / nEXT85 / nEXT240 / nEXT300 / nEXT400)

TIC automatically recognizes which turbo is connected and displays the appropriate information on the default summary screen. Scrolling and selecting accesses the control and set-up menus for that item.

Edwards Turbo speed is shown as a proportion of full speed by a bar graph. ‘Norm’ indicates that the turbo has reached its Normal Speed, whilst forward or reverse facing chevrons indicate acceleration and deceleration.

Edwards TIC Turbo Pump Controller offers two levels of password protection are available, effectively restricting or preventing unauthorized intervention.
Pumps status is displayed, giving a clear indication of what is currently happening in the vacuum system.

In the event of an error occurring, Edwards TIC will display either a WARNING or flash an ALARM. A warning advises of a condition outside normal parameters, requiring no action, but an alarm must be cleared before normal operation may resume.

The three set point relays which are highlighted when tripped, may be linked to turbo speed.

Condition: New