Sales and Service
855 882 2886
0 Items
$0.00
Find us on:
Main Categories

- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: Refurbished / Demo Turbo Pump Controllers
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 12 products
Item#: PN00325 Mfr Part#: D39614000 Manufacturer: Edwards Vacuum
PRICE: $3,300.00
WEB SAVINGS: $350.00
YOU PAY: $2,950.00

Edwards EXC 300 Turbo Pump Controller, D39614000, EXC300


  • Switched-mode power supplies which automatically adjust to any electrical supply.
  • Electromagnetic compatibility which exceeds the requirements of the European generic immunity and emission standards.
  • Regenerative power supply which provides vent-valve control options.
  • Rear panel sockets for vent-valve, air-cooler and active vacuum gauge.
  • Full remote control. Standby and bakeout band control from front panel.
  • User selectable ‘normal’ speed and time-out settings.
  • 0-5 V d.c. analog ouTPU t proportional to turbomolecular pump rotational speed.

Control functions available:

  • Manual control
  • Remote control
  • Standby
  • Bakeout band front panel switch
  • Rotary pump switching relay
  • Hours counter

Display functions available:

  • Electrical supply
  • Speed (4 segment bar graph)
  • Pump on
  • Pump awaiting interlock
  • Standby on
  • Bakeout band on (pump normal)

Compatible turbomolecular pumps:

  • EXT255H
  • EXT555H Series

Direct connection possible for:

  • ACX air cooler
  • TAV vent-valve
  • BX bakeout band
  • Rotary pump switching
  • Active gauge

A&J Vacuum Repair / Rebuild and Service all Edwards EXC Turbo  Pump Controllers  along with all other  Edwards EXT Turbo Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED.

 


Condition: Remanufactured In Stock
Item#: PN14006 Mfr Part#: D39640000 Manufacturer: Edwards Vacuum
PRICE: $985.00
WEB SAVINGS: $210.00
YOU PAY: $775.00

Edwards EXDC 80 Turbo Pump Controller, 70-85V, 93W, D39640000

Overview:

The Edwards EXDC-80 Turbo Pump Controller generates the control signals necessary to operate an EXT pump and its accessories.

The EXDC80 has no manual controls and can only be operated through the logic interface. To operate the EXT pump, you must therefore connect the EXDC to your own control equipment and electrical supply.

This Controller is designed for the following Mass Spectrometer Turbo Pumps:

  • Edwards EXT 70 Turbo Pump
  • Edwards EXT 70H Turbo Pump
  • Edwards EXT 250 Turbo Pump
  • Edwards EXT 255H Turbo Pump

THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED.

 


Condition: Remanufactured In Stock
Item#: PN17666 Mfr Part#: D39640500 Manufacturer: Edwards Vacuum
PRICE: $1,425.00
WEB SAVINGS: $650.00
YOU PAY: $775.00

 

Overview:

The Edwards EXDC80 Turbo Pump Controller generates the control signals necessary to operate an EXT pump and its accessories.

The EXDC has no manual controls and can only be operated through the logic interface. To operate the EXT pump, you must therefore connect the EXDC to your own control equipment and electrical supply.

This Controller is designed for the following Mass Spectrometer Turbo Pumps:

  • Edwards EXT 70 Turbo Pump
  • Edwards EXT 70H Turbo Pump
  • Edwards EXT 250 Turbo Pump
  • Edwards EXT 255H Turbo Pump

 

THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED.

 


Condition: Remanufactured In Stock
Item#: PN18583 Mfr Part#: D39641000 Manufacturer: Edwards Vacuum
PRICE: $1,431.00
WEB SAVINGS: $556.00
YOU PAY: $875.00

Edwards EXDC160 Turbo Pump Controller, 70-80V, 107W, D39641000, EXDC 160 Turbo Pump Drive Module.

 

The Edwards EXDC160 Turbo Pump Controller generates the control signals necessary to operate an EXT pump and its accessories.

The EXDC has no manual controls and can only be operated through the logic interface. To operate the EXT pump, you must therefore connect the EXDC to your own control equipment and electrical supply.

This Controller is designed for the following Mass Spectrometer Turbo Pumps:

  • Edwards EXT 70 Turbo Pump
  • Edwards EXT 70H Turbo Pump
  • Edwards EXT 250 Turbo Pump
  • Edwards EXT 255H Turbo Pump

 

THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED.


Condition: Remanufactured In Stock
Item#: PN21526 Mfr Part#: D39646510 Manufacturer: Edwards Vacuum
PRICE: $1,431.00
WEB SAVINGS: $536.00
YOU PAY: $895.00

Edwards EXDC160 45 DEG Turbo Pump Controller, 24 V, D39646510, EXDC-160 Edwards Drive Module EXDC 160

The Edwards EXDC160 Turbo Pump Controller generates the control signals necessary to operate an EXT pump and its accessories.

The EXDC-160 has no manual controls and can only be operated through the logic interface. To operate the EXT pump, you must therefore connect the EXDC / D396-46-510 to your own control equipment and electrical supply.

This Controller is designed for the following Mass Spectrometer Turbo Pumps:

  • Edwards EXT200/200 Turbo Pumps

 

A&J Vacuum also repair / rebuild and service all Edwards EXT200/200 Turbo Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Demo In Stock
Item#: PN24449 Mfr Part#: D39642500 Manufacturer: Edwards Vacuum
PRICE: $1,431.00
WEB SAVINGS: $746.00
YOU PAY: $685.00

Edwards EXDC 160 Turbo Pump Controller, 70-85V, 187W, D39642500, EXDC160


Overview:

The Edwards EXDC160 / D39642500 Turbo Pump Controller generates the control signals necessary to operate an EXT pump and its accessories.

The EXDC 160 / D39612500 has no manual controls and can only be operated through the logic interface. To operate the EXT pump, you must therefore connect the EXDC to your own control equipment and electrical supply.

This Controller is designed for the following Mass Spectrometer Turbo Pumps:

  • Edwards EXT200/200/30 / B75610000 / G1969-80010 Turbo Pump

 

 


Condition: Remanufactured In Stock
Item#: PN00324 Mfr Part#: D39616000 Manufacturer: Edwards Vacuum
PRICE: $2,350.00
WEB SAVINGS: $150.00
YOU PAY: $2,200.00

Edwards EXC 120 Turbo Pump Controller, D39616000

The Edwards EXC120 Controller generates the electrical supply and the control signals necessary to operate an EXT pump and its accessories. D39616000, EXC-120

The Edwards EXC120 Controller has a high-efficiency, auto-ranging power supply which adjusts itself to any external electrical supply in the specified voltage range. The power supply converts the single-phase electrical supply into a regulated d.c. electrical supply to control the
operation of the EXT pump. The pump has three Hall effect devices which operate as rotor position sensors. These sensors ensure that the drive current is correctly commutated to the pump-motor phase-windings. The Hall effect devices also generate a speed signal which the Controller uses to regulate the rotational speed of the pump.

The Edwards EXC120 Controller has a secondary regenerative supply which uses the d.c. motor of the EXT pump as a generator. If the electrical supply fails, the regenerative supply provides the Controller with a back-up source of power without the need for batteries. All Controllers use the regenerative supply to maintain the electrical supply to the vent-valve until the pump speed falls to below 50% of full rotational speed. The Controllers have a number of safety features which limit the power supplied to the EXT pump in the event of sustained high pressure or temperature:

 

THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED.


Condition: Remanufactured Call us for Availability
Item#: PN00326 Mfr Part#: D39622000 Manufacturer: Edwards Vacuum
PRICE: $2,299.00
WEB SAVINGS: $49.00
YOU PAY: $2,250.00

Edwards EXC100L Turbo Pump Controller, D39622000, EXC 100L,

Overview:

The Edwards EXC100L Turbo Pump Controller generates the electrical supply and the control signals necessary to operate an EXT pump and its accessories.

The Controller has a high-efficiency, auto-ranging power supply which adjusts itself to any external electrical supply in the specified voltage range. The power supply converts the single-phase electrical supply into a regulated d.c. electrical supply to control the operation of the EXT pump. The pump has three Hall effect devices which operate as rotor position sensors. These sensors ensure that the drive current is correctly switched to the phase-windings of the pump-motor . The Hall effect devices also generate a speed signal which the Controller uses to regulate the rotational speed of the pump.

The EXC 100L Controller has a secondary regenerative supply which uses the d.c. motor of the EXT pump as a generator. If the electrical supply fails, the regenerative supply provides the Controller with a back-up source of power without the need for batteries. The Controller uses the regenerative supply to maintain the electrical supplies to the vent-valve, air-cooler and AIM gauge (if connected) until the pump speed falls to below 50% of full rotational speed.

The EXC 100L Controller has no front-panel controls and can only be operated through the logic interface. To operate the EXT pump, you must therefore connect the Controller to your own control equipment. Alternatively, you can configure the mating-plug for the logic interface connector so that the EXT pump starts to operate as soon as the electrical supply to the Controller is switched on.

This Controller is designed for the following Mass Spectrometer Turbo Pumps:

  • Edwards EXT 70 Turbo Pump
  • Edwards EXT 70H Turbo Pump
  • Edwards EXT 250 Turbo Pump
  • Edwards EXT 255H Turbo Pump

THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED. 

 


Condition: Remanufactured Call us for Availability
Item#: PN14005 Mfr Part#: D39620000 Manufacturer: Edwards Vacuum
PRICE: $1,995.00
WEB SAVINGS: $370.00
YOU PAY: $1,625.00

 

Overview:

The Edwards EXC Turbo Pump Controller generates the electrical supply and the control signals necessary to operate an EXT pump and its accessories.

The Controller has a high-efficiency, auto-ranging power supply which adjusts itself to any external electrical supply in the specified voltage range. The power supply converts the single-phase electrical supply into a regulated d.c. electrical supply to control the operation of the EXT pump. The pump has three Hall effect devices which operate as rotor position sensors. These sensors ensure that the drive current is correctly switched to the phase-windings of the pump-motor . The Hall effect devices also generate a speed signal which the Controller uses to regulate the rotational speed of the pump.

The Controller has a secondary regenerative supply which uses the d.c. motor of the EXT pump as a generator. If the electrical supply fails, the regenerative supply provides the Controller with a back-up source of power without the need for batteries. The Controller uses the regenerative supply to maintain the electrical supplies to the vent-valve, air-cooler and AIM gauge (if connected) until the pump speed falls to below 50% of full rotational speed.

The Controller has no front-panel controls and can only be operated through the logic interface. To operate the EXT pump, you must therefore connect the Controller to your own control equipment. Alternatively, you can configure the mating-plug for the logic interface connector so that the EXT pump starts to operate as soon as the electrical supply to the Controller is switched on.

This Controller is designed for the following Mass Spectrometer Turbo Pumps:

  • Edwards EXT 70 Turbo Pump
  • Edwards EXT 70H Turbo Pump
  • Edwards EXT 250 Turbo Pump
  • Edwards EXT 255H Turbo Pump

THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED.

 


Condition: Remanufactured Call us for Availability
Item#: PN14007 Mfr Part#: D39645000 Manufacturer: Edwards Vacuum
PRICE: $895.00
WEB SAVINGS: $120.00
YOU PAY: $775.00

 

Overview:

The Edwards EXDC80 Turbo Pump Controller generates the control signals necessary to operate an EXT pump and its accessories.

The EXDC has no manual controls and can only be operated through the logic interface. To operate the EXT pump, you must therefore connect the EXDC to your own control equipment and electrical supply.

This Controller is designed for the following Mass Spectrometer Turbo Pumps:

  • Edwards EXT 70 Turbo Pump
  • Edwards EXT 70H Turbo Pump
  • Edwards EXT 250 Turbo Pump
  • Edwards EXT 255H Turbo Pump

 

THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED.

 


Condition: Remanufactured Call us for Availability
Contact
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.