Sales and Service
855 882 2886
0 Items
$0.00
Find us on:
Main Categories

- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: Edwards Vacuum
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 7 products
Item#: PN07106 Mfr Part#: A37132902 Manufacturer: Edwards Vacuum
PRICE: $2,850.00
WEB SAVINGS: $224.00
YOU PAY: $2,626.00

Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil,100-120 VAC, IEC 60320 Connector, A37132902

 

Edwards Vacuum E2M1.5 Overview:


The Edwards Vacuum E2M 1.5 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 1.5 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 1.5 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: New In Stock
Item#: PN23396 Mfr Part#: A37141902 Manufacturer: Edwards Vacuum
PRICE: $2,969.00
WEB SAVINGS: $400.00
YOU PAY: $2,569.00

Edwards E2M0.7 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 100-120 VAC, IEC  Connector, A37141902

Please note: Mains Cable is not included.

Edwards Vacuum E2M0.7 Overview:


The Edwards Vacuum E2M 0.7 pumps are two-stage, direct drive, sliding vane pumps. The E2M0.7 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 0.7 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 0.7 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M0.7 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M0.7, E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: New In Stock
Item#: PN18402 Mfr Part#: A37122919 Manufacturer: Edwards Vacuum
PRICE: $2,975.00
WEB SAVINGS: $281.00
YOU PAY: $2,694.00

Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 200-230 VAC, A37122919

 

Edwards Vacuum E2M1.5 Overview:


The Edwards E2M1.5 pumps are two-stage, direct drive, sliding vane pumps. The pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The E2M 1.5 motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An Edwards Vacuum Pump E2M1.5 oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M1.5 Rotary Vacuum Pump Applications:


  • Analytical instruments - LCMS
  • Automotive
  • Beam lines and high energy physics
  • Centrifuges, ultra-high speed
  • Coating
  • Cryogenics
  • Degassing/curing - oil, epoxy resin
  • Distillation/extraction/filtration
  • Freeze drying
  • Furnaces
  • Gas bottle filling/emptying
  • Gel drying
  • Glove boxes, ovens
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Load locks and transfer chambers
  • Refrigeration manufacture
  • Research and development
  • Rotary, centrifugal evaporators
  • Scanning electron microscopes - SEM
  • SEM/FIB (Ion beam repair)
  • Solvent recovery
  • Surface science instruments
  • Turbomolecular backing pumps
  • TV manufacturing / light bulb manufacturer

 

Edwards Vacuum E2M1.5 Rotary Vacuum Pump Features:


  • The pump is designed for reliable, long‑term operation. 
  • Thermal overload device prevents overheating (single phase only). 
  • The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor. 
  • The motors are totally enclosed and are cooled by the motor cooling fan. 
  • Full height O ring sealed oil sight glass for easy checking of oil level and condition. 
  • Large sight glass and operating oil range. 
  • IE3 energy efficient 3 phase motor used with E2M28.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.


Condition: New
Item#: PN20452 Mfr Part#: A37132919 Manufacturer: Edwards Vacuum
PRICE: $2,795.00
WEB SAVINGS: $400.00
YOU PAY: $2,395.00

Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 200-230 VAC, IEC  Connector, A37132919, A371-32-919

 

Edwards Vacuum E2M1.5 Overview:


The Edwards Vacuum E2M 1.5 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 1.5 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 1.5 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: New
Item#: PN23395 Mfr Part#: A37141919 Manufacturer: Edwards Vacuum
PRICE: $2,569.00
YOU PAY: $2,569.00

Edwards E2M0.7 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 200-230 VAC, IEC  Connector, A37141919

 

Please note: Mains Cable is not included.

 

Edwards Vacuum E2M0.7 Overview:


The Edwards Vacuum E2M 0.7 pumps are two-stage, direct drive, sliding vane pumps. The E2M0.7 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 0.7 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 0.7 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M0.7 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M0.7, E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: New
Item#: PN31591 Mfr Part#: A37131919 Manufacturer: Edwards Vacuum
Price upon request

Edwards E2M0.7 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon, 200-230 VAC, No Power Connector, A37131919

 

Please note: This unit doesn't include a power connector or mains cable.

 

Edwards Vacuum E2M0.7 Overview:


The Edwards Vacuum E2M 0.7 pumps are two-stage, direct drive, sliding vane pumps. The E2M0.7 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 0.7 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 0.7 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M0.7 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M0.7, E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: New
Item#: PN31596 Mfr Part#: A37142919 Manufacturer: Edwards Vacuum
PRICE: $3,500.00
WEB SAVINGS: $1,096.80
YOU PAY: $2,403.20

Edwards Micromeritics E2M0.7 Vacuum Pump, Dual Stage, Rotary Vane Pump, 200-230 VAC, IEC Connector for Micromeritics, A37142919, 062-62801-23

 

Please note: Mains Cable is not included.

 

Edwards Vacuum E2M0.7 Overview:


The Edwards Vacuum E2M 0.7 pumps are two-stage, direct drive, sliding vane pumps. The E2M0.7 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 0.7 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 0.7 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M0.7 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M0.7, E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: New
Contact
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.