Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
Reducers & Adaptors
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
KF - Quick Disconnect Adapter, KF 16 (NW 16) to 1/4" Compression Tube, Stainless Steel Vacuum Fitting, PN07863
KF - Quick Disconnect Adapter, KF 16 (NW 16 Flange) to 1/4 inch Compression Tube, Stainless Steel Vacuum Fitting Dimensions:
-
A: 0.26 in / 6.5 mm
-
B: 1.31 in / 33.4 mm
-
C: 1.18 in / 30 mm
Overview
KF - Quick Disconnect Adapter, KF 16 (NW 16) to 1/4" Compression Tube, Stainless Steel Vacuum Fitting, PN07863
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Quick Disconnect Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Quick Disconnect Adapter, KF 16 to 1/4 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to VCR Adapters are available in the following sizes:
-
NW 16 x 1/4" Tube
-
NW 16 x 1/2" Tube
-
NW 16 x 3/4" Tube
-
NW 25 x 1/2" Tube
-
NW 25 x 3/4" Tube
-
NW 25 x 1" Tube
-
NW 40 x 1/2" Tube
-
NW 40 x 3/4" Tube
-
NW 40 x 1" Tube
-
NW 40 x 1 1/2" Tube
-
NW 50 x 1 1/2" Tube
-
NW 50 x 2" Tube
KF - Quick Disconnect Adapter, KF 16 (NW 16) to 1/2" Compression Tube, Stainless Steel Vacuum Fitting, PN07864
Overview
-
A: 0.51 in / 13 mm
-
B: 1.44 in / 36.5 mm
-
C: 1.18 in / 30 mm
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Quick Disconnect Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Quick Disconnect Adapter, KF 16 to 1/2 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to VCR Adapters are available in the following sizes:
-
NW 16 x 1/4" Tube
-
NW 16 x 1/2" Tube
-
NW 16 x 3/4" Tube
-
NW 25 x 1/2" Tube
-
NW 25 x 3/4" Tube
-
NW 25 x 1" Tube
-
NW 40 x 1/2" Tube
-
NW 40 x 3/4" Tube
-
NW 40 x 1" Tube
-
NW 40 x 1 1/2" Tube
-
NW 50 x 1 1/2" Tube
-
NW 50 x 2" Tube
KF - Quick Disconnect Adapter, KF 40 (NW 40) to 1/2" Compression Tube, Stainless Steel Vacuum Fitting, PN14557
KF - Quick Disconnect Adapter, KF 40 (NW 40 Flange) to 1/2 inch Compression Tube, Stainless Steel Vacuum Fitting Dimensions:
-
A: 0.51 in / 13 mm
-
B: 1.44 in / 36.5 mm
-
C: 2.17 in / 55 mm
Overview
KF - Quick Disconnect Adapter, KF 40 (NW 40) to 1/2" Compression Tube, Stainless Steel Vacuum Fitting, PN14557
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Quick Disconnect Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Quick Disconnect Adapter, KF 40 to 1/2 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Quick Disconnect Adapters are available in the following sizes:
-
NW 16 x 1/4" Tube
-
NW 16 x 1/2" Tube
-
NW 16 x 3/4" Tube
-
NW 25 x 1/2" Tube
-
NW 25 x 3/4" Tube
-
NW 25 x 1" Tube
-
NW 40 x 1/2" Tube
-
NW 40 x 3/4" Tube
-
NW 40 x 1" Tube
-
NW 40 x 1 1/2" Tube
-
NW 50 x 1 1/2" Tube
-
NW 50 x 2" Tube
KF - Quick Disconnect Adapter, KF 16 (NW 16) to 3/4" Compression Tube, Stainless Steel Vacuum Fitting, PN14573
KF - Quick Disconnect Adapter, KF 16 (NW 16 Flange) to 3/4 inch Compression Tube, Stainless Steel Vacuum Fitting Dimensions:
-
A: 0.76 in / 19.3 mm
-
B: 1.75 in / 44.5 mm
-
C: 1.18 in / 30 mm
Overview
KF - Quick Disconnect Adapter, KF 16 (NW 16) to 3/4" Compression Tube, Stainless Steel Vacuum Fitting, PN07864
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Quick Disconnect Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Quick Disconnect Adapter, KF 16 to 3/4 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Quick Disconnect Adapters are available in the following sizes:
-
NW 16 x 1/4" Tube
-
NW 16 x 1/2" Tube
-
NW 16 x 3/4" Tube
-
NW 25 x 1/2" Tube
-
NW 25 x 3/4" Tube
-
NW 25 x 1" Tube
-
NW 40 x 1/2" Tube
-
NW 40 x 3/4" Tube
-
NW 40 x 1" Tube
-
NW 40 x 1 1/2" Tube
-
NW 50 x 1 1/2" Tube
-
NW 50 x 2" Tube
KF - Quick Disconnect Adapter, KF 25 (NW 25) to 1/2" Compression Tube, Stainless Steel Vacuum Fitting, PN14574
KF - Quick Disconnect Adapter, KF 25 (NW 25 Flange) to 1/2 inch Compression Tube, Stainless Steel Vacuum Fitting Dimensions:
-
A: 0.51 in / 13 mm
-
B: 1.44 in / 36.5 mm
-
C: 1.57 in / 40 mm
Overview
KF - Quick Disconnect Adapter, KF 25 (NW 25) to 1/2" Compression Tube, Stainless Steel Vacuum Fitting, PN14574
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Quick Disconnect Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Quick Disconnect Adapter, KF 25 to 1/2 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Quick Disconnect Adapters are available in the following sizes:
-
NW 16 x 1/4" Tube
-
NW 16 x 1/2" Tube
-
NW 16 x 3/4" Tube
-
NW 25 x 1/2" Tube
-
NW 25 x 3/4" Tube
-
NW 25 x 1" Tube
-
NW 40 x 1/2" Tube
-
NW 40 x 3/4" Tube
-
NW 40 x 1" Tube
-
NW 40 x 1 1/2" Tube
-
NW 50 x 1 1/2" Tube
-
NW 50 x 2" Tube
KF - Quick Disconnect Adapter, KF 25 (NW 25) to 3/4" Compression Tube, Stainless Steel Vacuum Fitting, PN14575
KF - Quick Disconnect Adapter, KF 25 (NW 25 Flange) to 3/4 inch Compression Tube, Stainless Steel Vacuum Fitting Dimensions:
-
A: 0.76 in / 19.3 mm
-
B: 1.75 in / 44.5 mm
-
C: 1.57 in / 40 mm
Overview
KF - Quick Disconnect Adapter, KF 25 (NW 25) to 3/4" Compression Tube, Stainless Steel Vacuum Fitting, PN14575
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Quick Disconnect Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Quick Disconnect Adapter, KF 25 to 3/4 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Quick Disconnect Adapters are available in the following sizes:
-
NW 16 x 1/4" Tube
-
NW 16 x 1/2" Tube
-
NW 16 x 3/4" Tube
-
NW 25 x 1/2" Tube
-
NW 25 x 3/4" Tube
-
NW 25 x 1" Tube
-
NW 40 x 1/2" Tube
-
NW 40 x 3/4" Tube
-
NW 40 x 1" Tube
-
NW 40 x 1 1/2" Tube
-
NW 50 x 1 1/2" Tube
-
NW 50 x 2" Tube
KF - Quick Disconnect Adapter, KF 40 (NW 40) to 1" Compression Tube, Stainless Steel Vacuum Fitting, PN14578
KF - Quick Disconnect Adapter, KF 40 (NW 40 Flange) to 1 inch Compression Tube, Stainless Steel Vacuum Fitting Dimensions:
-
A: 1.01 in / 25.7 mm
-
B: 2 in / 50.8 mm
-
C: 2.17 in / 55 mm
Overview
KF - Quick Disconnect Adapter, KF 40 (NW 40) to 1" Compression Tube, Stainless Steel Vacuum Fitting, PN14578
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Quick Disconnect Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Quick Disconnect Adapter, KF 40 to 1 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Quick Disconnect Adapters are available in the following sizes:
-
NW 16 x 1/4" Tube
-
NW 16 x 1/2" Tube
-
NW 16 x 3/4" Tube
-
NW 25 x 1/2" Tube
-
NW 25 x 3/4" Tube
-
NW 25 x 1" Tube
-
NW 40 x 1/2" Tube
-
NW 40 x 3/4" Tube
-
NW 40 x 1" Tube
-
NW 40 x 1 1/2" Tube
-
NW 50 x 1 1/2" Tube
-
NW 50 x 2" Tube
KF - Quick Disconnect Adapter, KF 40 (NW 40) to 1 1/2" Compression Tube, Stainless Steel Vacuum Fitting, PN14579
KF - Quick Disconnect Adapter, KF 40 (NW 40 Flange) to 1 1/2 inch Compression Tube, Stainless Steel Vacuum Fitting Dimensions:
-
A: 1.51 in / 38.4 mm
-
B: 2.37 in / 60.3 mm
-
C: 2.17 in / 55 mm
Overview
KF - Quick Disconnect Adapter, KF 40 (NW 40) to 1 1/2" Compression Tube, Stainless Steel Vacuum Fitting, PN14579
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Quick Disconnect Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Quick Disconnect Adapter, KF 40 to 1 1/2 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Quick Disconnect Adapters are available in the following sizes:
-
NW 16 x 1/4" Tube
-
NW 16 x 1/2" Tube
-
NW 16 x 3/4" Tube
-
NW 25 x 1/2" Tube
-
NW 25 x 3/4" Tube
-
NW 25 x 1" Tube
-
NW 40 x 1/2" Tube
-
NW 40 x 3/4" Tube
-
NW 40 x 1" Tube
-
NW 40 x 1 1/2" Tube
-
NW 50 x 1 1/2" Tube
-
NW 50 x 2" Tube
KF - Quick Disconnect Adapter, KF 25 (NW 25) to 1" Compression Tube, Stainless Steel Vacuum Fitting, PN14576
KF - Quick Disconnect Adapter, KF 25 (NW 25 Flange) to 1 inch Compression Tube, Stainless Steel Vacuum Fitting Dimensions:
-
A: 1.01 in / 25.7 mm
-
B: 2 in / 50.8 mm
-
C: 1.57 in / 40 mm
Overview
KF - Quick Disconnect Adapter, KF 25 (NW 25) to 1" Compression Tube, Stainless Steel Vacuum Fitting, PN14576
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Quick Disconnect Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Quick Disconnect Adapter, KF 25 to 1 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Quick Disconnect Adapters are available in the following sizes:
-
NW 16 x 1/4" Tube
-
NW 16 x 1/2" Tube
-
NW 16 x 3/4" Tube
-
NW 25 x 1/2" Tube
-
NW 25 x 3/4" Tube
-
NW 25 x 1" Tube
-
NW 40 x 1/2" Tube
-
NW 40 x 3/4" Tube
-
NW 40 x 1" Tube
-
NW 40 x 1 1/2" Tube
-
NW 50 x 1 1/2" Tube
-
NW 50 x 2" Tube
KF - Quick Disconnect Adapter, KF 40 (NW 40) to 3/4" Compression Tube, Stainless Steel Vacuum Fitting, PN14577
KF - Quick Disconnect Adapter, KF 40 (NW 40 Flange) to 3/4 inch Compression Tube, Stainless Steel Vacuum Fitting Dimensions:
-
A: 0.78 in / 19.3 mm
-
B: 1.75 in / 44.5 mm
-
C: 2.17 in / 55 mm
Overview
KF - Quick Disconnect Adapter, KF 40 (NW 40) to 3/4" Compression Tube, Stainless Steel Vacuum Fitting, PN14577
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Quick Disconnect Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Quick Disconnect Adapter, KF 40 to 3/4 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Quick Disconnect Adapters are available in the following sizes:
-
NW 16 x 1/4" Tube
-
NW 16 x 1/2" Tube
-
NW 16 x 3/4" Tube
-
NW 25 x 1/2" Tube
-
NW 25 x 3/4" Tube
-
NW 25 x 1" Tube
-
NW 40 x 1/2" Tube
-
NW 40 x 3/4" Tube
-
NW 40 x 1" Tube
-
NW 40 x 1 1/2" Tube
-
NW 50 x 1 1/2" Tube
-
NW 50 x 2" Tube
