Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
Reducers & Adaptors
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
KF - Rubber Hose Adapter, KF 40 (NW 40) to 1 5/8" Barb, Stainless Steel Vacuum Fitting, PN07880
KF - Rubber Hose Adapter, KF 40 (NW 40 Flange) to 1 5/8 inch Barb, Stainless Steel Vacuum Fitting Dimensions:
-
A: 1.63 in / 41.3 mm
-
B: 1.57 in / 40 mm
-
C: 2.17 in / 55 mm
Overview
KF - Rubber Hose Adapter, KF 40 (NW 40) to 1 5/8" Barb, Stainless Steel Vacuum Fitting, PN07880
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 40 to 1 5/8 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Rubber Hose Adapters are available in the following sizes:
-
NW 10 x 5/8"
-
NW 16 x 3/4"
-
NW 16 x 5/8"
-
NW 25 x 1"
-
NW 25 x 7/8"
-
NW 40 x 1 5/8"
-
NW 40 x 1.5"
-
NW 50 x 1 7/8"
-
NW 50 x 2"
KF - Rubber Hose Adapter, KF 50 (NW 50) to 1 7/8" Barb, Stainless Steel Vacuum Fitting, PN14582
KF - Rubber Hose Adapter, KF 50 (NW 50 Flange) to 1 7/8" inch Barb, Stainless Steel Vacuum Fitting Dimensions:
-
A: 1.88 in / 47.7 mm
-
B: 1.57 in / 40 mm
-
C: 2.95 in / 75 mm
Overview
KF - Rubber Hose Adapter, KF 50 (NW 50) to 1 7/8" Barb, Stainless Steel Vacuum Fitting, PN14582
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 50 to 1 7/8 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Rubber Hose Adapters are available in the following sizes:
-
NW 10 x 5/8"
-
NW 16 x 3/4"
-
NW 16 x 5/8"
-
NW 25 x 1"
-
NW 25 x 7/8"
-
NW 40 x 1 5/8"
-
NW 40 x 1.5"
-
NW 50 x 1 7/8"
-
NW 50 x 2"
KF - Rubber Hose Adapter, KF 16 (NW 16) to 3/4" Barb, Stainless Steel Vacuum Fitting, PN14640
KF - Rubber Hose Adapter, KF 16 (NW 16 Flange) to 3/4 inch Barb, Stainless Steel Vacuum Fitting Dimensions:
-
A: 0.63 in / 16 mm
-
B: 1.57 in / 40 mm
-
C: 1.18 in / 30 mm
Overview
KF - Rubber Hose Adapter, KF 16 (NW 16) to 3/4" Barb, Stainless Steel Vacuum Fitting, PN14639
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 16 to 3/4 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Rubber Hose Adapters are available in the following sizes:
-
NW 10 x 5/8"
-
NW 16 x 3/4"
-
NW 16 x 5/8"
-
NW 25 x 1"
-
NW 25 x 7/8"
-
NW 40 x 1 5/8"
-
NW 40 x 1.5"
-
NW 50 x 1 7/8"
-
NW 50 x 2"
KF - Rubber Hose Adapter, KF 40 (NW 40) to 1 5/8" Barb, Aluminum Vacuum Fitting, PN14642
KF - Rubber Hose Adapter, KF 40 (NW 40 Flange) to 1 5/8 inch Barb, Aluminum Vacuum Fitting Dimensions:
-
A: 1.63 in / 41.3 mm
-
B: 1.57 in / 40 mm
-
C: 2.17 in / 55 mm
Overview
KF - Rubber Hose Adapter, KF 40 (NW 40) to 1 5/8" Barb, Aluminum Vacuum Fitting, PN14642
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Rubber Hose Adapters (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 40 to 1 5/8 inch Compression Tube, Aluminum Vacuum Fitting.
The KF to Rubber Hose Adapters are available in the following sizes:
-
NW 10 x 5/8"
-
NW 16 x 3/4"
-
NW 16 x 5/8"
-
NW 25 x 1"
-
NW 25 x 7/8"
-
NW 40 x 1 5/8"
-
NW 40 x 1.5"
-
NW 50 x 1 7/8"
-
NW 50 x 2"
KF - Rubber Hose Adapter, KF 50 (NW 50) to 1 7/8" Barb, Aluminum Vacuum Fitting, PN14643
KF - Rubber Hose Adapter, KF 50 (NW 50 Flange) to 1 7/8 inch Barb, Aluminum Vacuum Fitting Dimensions:
-
A: 1.88 in / 47.7 mm
-
B: 1.57 in / 40 mm
-
C: 2.95 in / 75 mm
Overview
KF - Rubber Hose Adapter, KF 50 (NW 50) to 1 7/8" Barb, Aluminum Vacuum Fitting, PN14643
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Rubber Hose Adapters (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 50 to 1 7/8" Compression Tube, Aluminum Vacuum Fitting.
The KF to Rubber Hose Adapters are available in the following sizes:
-
NW 10 x 5/8"
-
NW 16 x 3/4"
-
NW 16 x 5/8"
-
NW 25 x 1"
-
NW 25 x 7/8"
-
NW 40 x 1 5/8"
-
NW 40 x 1.5"
-
NW 50 x 1 7/8"
-
NW 50 x 2"
KF - Rubber Hose Adapter, KF 16 (NW 16) to 5/8" Barb, Aluminum Vacuum Fitting, PN17932
KF - Rubber Hose Adapter, KF 16 (NW 16 Flange) to 5/8 inch Barb, Aluminum Vacuum Fitting Dimensions:
-
A: 0.75 in / 19.1 mm
-
B: 1.57 in / 40 mm
-
C: 1.18 in / 30 mm
Overview
KF - Rubber Hose Adapter, KF 16 (NW 16) to 5/8" Barb, Aluminum Vacuum Fitting, PN17932
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Rubber Hose Adapters are made out of Aluminum. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 16 to 5/8 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Rubber Hose Adapters are available in the following sizes:
-
NW 10 x 5/8"
-
NW 16 x 3/4"
-
NW 16 x 5/8"
-
NW 25 x 1"
-
NW 25 x 7/8"
-
NW 40 x 1 5/8"
-
NW 40 x 1.5"
-
NW 50 x 1 7/8"
-
NW 50 x 2"
KF - Rubber Hose Adapter, KF 25 (NW 25) to 1" Barb, Stainless Steel Vacuum Fitting, PN19761
KF - Rubber Hose Adapter, KF 25 (NW 25 Flange) to 1 inch Barb, Stainless Steel Vacuum Fitting Dimensions:
-
A: 1.00 in / 22.4 mm
-
B: 1.50 in / 38.1 mm
Overview
KF - Rubber Hose Adapter, KF 25 (NW 25) to 1" Barb, Stainless Steel Vacuum Fitting, PN19761
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 25 to 1 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Rubber Hose Adapters are available in the following sizes:
-
NW 10 x 5/8"
-
NW 16 x 3/4"
-
NW 16 x 5/8"
-
NW 25 x 1"
-
NW 25 x 7/8"
-
NW 40 x 1 5/8"
-
NW 40 x 1.5"
-
NW 50 x 1 7/8"
-
NW 50 x 2"
KF - Rubber Hose Adapter, KF 40 (NW 40) to 1.5" Barb, Stainless Steel Vacuum Fitting, PN19762
KF - Rubber Hose Adapter, KF 40 (NW 40 Flange) to 1.5 inch Barb, Stainless Steel Vacuum Fitting Dimensions:
-
A: 1.5 in / 38.1 mm
-
B: 1.57 in / 50 mm
Overview
KF - Rubber Hose Adapter, KF 40 (NW 40) to 1.5" Barb, Stainless Steel Vacuum Fitting, PN19762
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 40 to 1.5 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Rubber Hose Adapters are available in the following sizes:
-
NW 10 x 5/8"
-
NW 16 x 3/4"
-
NW 16 x 5/8"
-
NW 25 x 1"
-
NW 25 x 7/8"
-
NW 40 x 1 5/8"
-
NW 40 x 1.5"
-
NW 50 x 1 7/8"
-
NW 50 x 2"
KF - Rubber Hose Adapter, KF 16 (NW 16) to 3/4" Barb, Aluminum Vacuum Fitting, PN40725
KF - Rubber Hose Adapter, KF 16 (NW 16 Flange) to 3/4 inch Barb, Aluminum Vacuum Fitting Dimensions:
-
A:
-
B: 1.57 in / 40 mm
-
C: 1.18 in / 30 mm
Overview
KF - Rubber Hose Adapter, KF 16 (NW 16) to 3/4" Barb, Stainless Steel Vacuum Fitting, PN14639
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 16 to 3/4 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Rubber Hose Adapters are available in the following sizes:
-
NW 10 x 5/8"
-
NW 16 x 3/4"
-
NW 16 x 5/8"
-
NW 25 x 1"
-
NW 25 x 7/8"
-
NW 40 x 1 5/8"
-
NW 40 x 1.5"
-
NW 50 x 1 7/8"
-
NW 50 x 2"
KF - Rubber Hose Adapter, KF 10 (NW 10) to 5/8" Barb, Stainless Steel Vacuum Fitting, PN14639
KF - Rubber Hose Adapter, KF 10 (NW 10 Flange) to 5/8 inch Barb, Stainless Steel Vacuum Fitting Dimensions:
-
A: 0.63 in / 16 mm
-
B: 1.57 in / 40 mm
-
C: 1.18 in / 30 mm
Overview
KF - Rubber Hose Adapter, KF 10 (NW 10) to 5/8" Barb, Stainless Steel Vacuum Fitting, PN14639
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 10 to 5/8 inch Compression Tube, Stainless Steel Vacuum Fitting.
The KF to Rubber Hose Adapters are available in the following sizes:
-
NW 10 x 5/8"
-
NW 16 x 3/4"
-
NW 16 x 5/8"
-
NW 25 x 1"
-
NW 25 x 7/8"
-
NW 40 x 1 5/8"
-
NW 40 x 1.5"
-
NW 50 x 1 7/8"
-
NW 50 x 2"
