phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
Main Categories

- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: New Mist Filters
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 5 products
Item#: PN07038 Mfr Part#: G8600A100 / 9499388 Manufacturer: Agilent Technologies / Varian
Price upon request

Oil Mist Eliminator for DS42 RVP Reduces oil vapor in pump exhaust.


Condition: New
Item#: PN07276 Mfr Part#: 9499392 Manufacturer: Agilent Technologies / Varian
Price upon request

 

Overview:

The Varian Exhaust Mist Filter uses a high efficiency oil separating cartridge.

The output gas from the pump flows through the duct, passes the cartridge and exits from the surrounding chamber.

The oil mist is filtered by the cartridge where it transforms into drops. The drops deposit on the carter bottom for the gravity effect.

The cartridge also filters the solid particles from the gas. These particles are the main cause of the cartridge clog.

To avoid that the pressure before the filtering element increases so that the pump does not work properly, an overpressure device is provided that intervenes when the pressure reaches the 1 bar value.

When the cartridge is obstructed and the security system is operating, the oil mist is dragged by the gas flux from the pump directly to the external ambient.

Before the cartridge is completely obstructed, it is advisable to change it on a regular basis according to the pump application.

The Exhaust Filter is installed on the pump connecting the flange to the outlet flange of the pump by means of a clamping collar and centering ring.

 


Condition: New
Item#: PN15798 Mfr Part#: 9499395 Manufacturer: Agilent Technologies / Varian
This product has been discontinued and is no longer available for sale

Varian Exhaust Mist Filter for DS 102 - DS 602 Rotary Vane Vacuum Pumps, KF 25, 9499395


The Varian Exhaust Mist Filter is assembled at the outlet of Rotary Vane Pumps and the main purpose is to purify the exhaust gases from oil mists. The use is advised for pumps which have to work for a long time at intake pressures exceeding 10 mbar, or with the ballasting tap open. The oil mist filter is provided with a relief valve to protect the pump from overloads caused by excessive resistance on the exhaust line. In case of saturation of the filtering element, it is possible to simply remove and replace it.

  • Weight: 140 g
  • Connection: KF 25
  • Material: Nylon 30VF

 Designed To Be Used With The Following Agilent / Varian Rotary Vane Vacuum Pumps:

  1. DS 102
  2. DS 202
  3. DS 302
  4. DS 402
  5. DS 602

 


Condition: Discontinued
Item#: PN17684 Mfr Part#: YB25 Manufacturer: Agilent Technologies / Varian
PRICE: $273.00
WEB SAVINGS: $25.00
YOU PAY: $248.00

YB-25 Oil Mist Filter with Filter Element for the TRP Series Rotary Vane Vacuum Pumps, DN 25 KF.

1-30 CFM


Condition: New
Item#: PN20912 Mfr Part#: 9499392M004 Manufacturer: Agilent Technologies / Varian
Price upon request

Agilent Oil Exhaust Filter  9499392M004 For Agilent DS 402 Vacuum Pumps, KF 25, also known as Varian 9499392M004

Overview:

The Varian Exhaust Mist Filter uses a high efficiency oil separating cartridge.

The output gas from the pump flows through the duct, passes the cartridge and exits from the surrounding chamber.

The oil mist is filtered by the cartridge where it transforms into drops. The drops deposit on the carter bottom for the gravity effect.

The cartridge also filters the solid particles from the gas. These particles are the main cause of the cartridge clog.

To avoid that the pressure before the filtering element increases so that the pump does not work properly, an overpressure device is provided that intervenes when the pressure reaches the 1 bar value.

When the cartridge is obstructed and the security system is operating, the oil mist is dragged by the gas flux from the pump directly to the external ambient.

Before the cartridge is completely obstructed, it is advisable to change it on a regular basis according to the pump application.

The Exhaust Filter is installed on the pump connecting the flange to the outlet flange of the pump by means of a clamping collar and centering ring.

 


Condition: New
Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.