phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
Main Categories

Turbo Pumps & Systems

- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: nEXT 85 Series
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 5 products
Item#: PN23733 Mfr Part#: B8G410B01 Manufacturer: Edwards Vacuum
PRICE: $7,351.00
WEB SAVINGS: $1,101.05
YOU PAY: $6,249.95

Edwards nEXT 85 H Turbomolecular Vacuum Pump, DN 63 ISO, NW16, 80 W, B8G410B01, B8G 410 B01

 

Edwards nEXT85H Overview


The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT85H Features


  • Class leading performance in a reduced footprint
  • Enhanced customer choice with standard and compression focused variants
  • Increased operating envelope maximised by Edwards’ patented direct impeller temperature measurement technology
  • Additional flexibility from customised interstage and backing port position selection
  • 4 year service with full end-user field serviceability
  • CMSD enabled low vibration levels
  • Intelligent pumps with included micro USB port and Edwards nST software allowing pump monitoring, control and configuration
  • Full suite of tailored accessories

 

Edwards nEXT 85 are two main variants 


  • Duplex - “D” - variants with both turbomolecular and drag stages for improved tolerance to higher backing line pressures.
  • High Compression - “H” - variant employs the same technology as the 'D' variant, but is tuned to deliver higher compression

 

Edwards nEXT85H Pumping Speed


Edwards nEXT85 next 85 next-85 Pumping Speed, B8G410B01

 

Edwards nEXT85H Dimensions


Edwards nEXT85 next 85 next-85 Dimensions, B8G410B01


Click Here for Edwards nEXT85H nEXT 85H nEXT-85H Manual


Photo "Asset: Atlas Copco"


A&J Vacuum Services offers full repair/service of Edwards nEXT Turbo Pumps, along with all other brands offered on our website. AJVS also services Edwards Vacuum Pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.


Condition: New
Item#: PN23734 Mfr Part#: B8G410C01 Manufacturer: Edwards Vacuum
PRICE: $8,582.00
WEB SAVINGS: $858.20
YOU PAY: $7,723.80

Edwards nEXT 85 H Turbomolecular Vacuum Pump, CF 63, NW16, 80 W, B8G410C01, B8G 410 C01

 

Edwards nEXT85H Overview


The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT85H Features


  • Class leading performance in a reduced footprint
  • Enhanced customer choice with standard and compression focused variants
  • Increased operating envelope maximised by Edwards’ patented direct impeller temperature measurement technology
  • Additional flexibility from customised interstage and backing port position selection
  • 4 year service with full end-user field serviceability
  • CMSD enabled low vibration levels
  • Intelligent pumps with included micro USB port and Edwards nST software allowing pump monitoring, control and configuration
  • Full suite of tailored accessories

 

Edwards nEXT 85 are two main variants 


  • Duplex - “D” - variants with both turbomolecular and drag stages for improved tolerance to higher backing line pressures.
  • High Compression - “H” - variant employs the same technology as the 'D' variant, but is tuned to deliver higher compression

 

Edwards nEXT85H Pumping Speed


Edwards nEXT85 next 85 next-85 Pumping Speed, B8G410C01

 

Edwards nEXT85H Dimensions


Edwards nEXT85 next 85 next-85 Dimensions, B8G410C01


Click Here for Edwards nEXT85H nEXT 85H nEXT-85H Manual


Photo "Asset: Atlas Copco"


A&J Vacuum Services offers full repair/service of Edwards nEXT Turbo Pumps, along with all other brands offered on our website. AJVS also services Edwards Vacuum Pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.


Condition: New
Item#: PN23735 Mfr Part#: B8G410A01 Manufacturer: Edwards Vacuum
PRICE: $7,351.00
YOU PAY: $7,792.00

Edwards nEXT 85 H Turbomolecular Vacuum Pump, NW 40, NW16, 80 W, B8G410A01, B8G 410 A01

 

Edwards nEXT85H Overview


The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT85H Features


  • Class leading performance in a reduced footprint
  • Enhanced customer choice with standard and compression focused variants
  • Increased operating envelope maximised by Edwards’ patented direct impeller temperature measurement technology
  • Additional flexibility from customised interstage and backing port position selection
  • 4 year service with full end-user field serviceability
  • CMSD enabled low vibration levels
  • Intelligent pumps with included micro USB port and Edwards nST software allowing pump monitoring, control and configuration
  • Full suite of tailored accessories

 

Edwards nEXT 85 are two main variants 


  • Duplex - “D” - variants with both turbomolecular and drag stages for improved tolerance to higher backing line pressures.
  • High Compression - “H” - variant employs the same technology as the 'D' variant, but is tuned to deliver higher compression

 

Edwards nEXT85H Pumping Speed


Edwards nEXT85 next 85 next-85 Pumping Speed, B8G410A01

 

Edwards nEXT85H Dimensions


Edwards nEXT85 next 85 next-85 Dimensions, B8G410A01


Click Here for Edwards nEXT85H nEXT 85H nEXT-85H Manual


Photo "Asset: Atlas Copco"


A&J Vacuum Services offers full repair/service of Edwards nEXT Turbo Pumps, along with all other brands offered on our website. AJVS also services Edwards Vacuum Pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.


Condition: New
Item#: PN23736 Mfr Part#: B8G410101 Manufacturer: Edwards Vacuum
PRICE: $8,508.00
WEB SAVINGS: $1,278.05
YOU PAY: $7,229.95

Edwards nEXT 85 H Turbomolecular Vacuum Pump, ISO 100, NW16, 80 W, B8G410101, B8G 410 101

 

Edwards nEXT85H Overview


The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT85H Features


  • Class leading performance in a reduced footprint
  • Enhanced customer choice with standard and compression focused variants
  • Increased operating envelope maximised by Edwards’ patented direct impeller temperature measurement technology
  • Additional flexibility from customised interstage and backing port position selection
  • 4 year service with full end-user field serviceability
  • CMSD enabled low vibration levels
  • Intelligent pumps with included micro USB port and Edwards nST software allowing pump monitoring, control and configuration
  • Full suite of tailored accessories

 

Edwards nEXT 85 are two main variants 


  • Duplex - “D” - variants with both turbomolecular and drag stages for improved tolerance to higher backing line pressures.
  • High Compression - “H” - variant employs the same technology as the 'D' variant, but is tuned to deliver higher compression

 

Edwards nEXT85H Pumping Speed


Edwards nEXT85 next 85 next-85 Pumping Speed, B8G410101

 

Edwards nEXT85H Dimensions


Edwards nEXT85 next 85 next-85 Dimensions, B8G410101


Click Here for Edwards nEXT85H nEXT 85H nEXT-85H Manual


Photo "Asset: Atlas Copco"


A&J Vacuum Services offers full repair/service of Edwards nEXT Turbo Pumps, along with all other brands offered on our website. AJVS also services Edwards Vacuum Pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.


Condition: New
Item#: PN23743 Mfr Part#: B8G411C01 Manufacturer: Edwards Vacuum
PRICE: $7,785.00
WEB SAVINGS: $1,165.05
YOU PAY: $6,619.95

Edwards nEXT 85 IH Turbomolecular Vacuum Pump, CF 63, NW16/16, 80 W, B8G411C01, B8G 411 C01

 

Edwards nEXT85IH Overview


The nEXT 85IH pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 IH pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

nEXT 85IH pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 85 IH pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT85IH Features


  • Class leading performance in a reduced footprint
  • Enhanced customer choice with standard and compression focused variants
  • Increased operating envelope maximised by Edwards’ patented direct impeller temperature measurement technology
  • Additional flexibility from customised interstage and backing port position selection
  • 4 year service with full end-user field serviceability
  • CMSD enabled low vibration levels
  • Intelligent pumps with included micro USB port and Edwards nST software allowing pump monitoring, control and configuration
  • Full suite of tailored accessories

 

Edwards nEXT 85 are two main variants 


  • Duplex - “D” - variants with both turbomolecular and drag stages for improved tolerance to higher backing line pressures.
  • High Compression - “H” - variant employs the same technology as the 'D' variant, but is tuned to deliver higher compression

 

Edwards nEXT85IH Pumping Speed


Edwards nEXT85 next 85 next-85 Pumping Speed, B8G214B01

 

Edwards nEXT85IH Dimensions


Edwards nEXT85 next 85 next-85 Dimensions, B8G214B01


Click Here for Edwards nEXT85D nEXT 85D nEXT-85D Manual


A&J Vacuum Services offers full repair/service of Edwards nEXT Turbo Pumps, along with all other brands offered on our website. AJVS also services Edwards Vacuum Pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.


Condition: New
Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.