phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
Main Categories

Turbo Pumps & Systems

- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: Edwards Vacuum
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 12 products
Item#: PN20403 Mfr Part#: B822-00-103, B82200103 Manufacturer: Edwards Vacuum
PRICE: $10,325.30
WEB SAVINGS: $4,375.30
YOU PAY: $5,950.00

Edwards nEXT300D Turbo Pump, ISO-100, 80 W, B82200103, B822-00-103, nEXT 300D

The nEXT300D Turbomolecular pumps B822-00-103 with ISO100 Inlet fglange consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT 300D pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

New Edwards nEXT300 pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT300D pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. Not included with refurbished pump.

The nEXT300D Turbo molecular pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The Edwards Turbo pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

Air cooling and a water-cooling block are available.

A&J Vacuum Repair / Rebuild and Service EDWARDS nEXT300D PUMPS, nXDS Pumps  and  all Scroll pump service along with all other EdwardsVacuum Rotary Vane Pumps, Edwards Turbomolecular Pumps  repair, Edwards Leak Detector Repair and all other Edwards Vacuum pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured In Stock
Item#: PN23311 Mfr Part#: G3850-80010 / B85200512 Manufacturer: Edwards Vacuum
Price upon request

Agilent NEXT 200/200D, V.160 W Turbo Pump, G3850-80010, Split Flow Dual ISO100 Inlet, Edwards NEXT200200, B85200512,


Agilent NEXT200/200D p/n G3850-80010 turbo pumps are designed to be operated within Agilent GC/MS Systems

Pump manufactured by Edwards NEXT200200D V.160 W p/n B85200512 is split flow compound turbomolecular pump

Agilent NEXT 200200 D is a replacement for obsolete Split Flow Turbo Pump G7000-80010

Agilent Split Flow Turbo Pump NEXT200/200 is a part of Agilent 7250 Accurate-MAss / Q-TOF GC/MS System

Please refer to operation manual for specifications.


A&J Vacuum also repair / rebuild and service Agilent NEXT 200200D  G3850-80010, G7000-80010,Turbo Pumps as well as all other Edwards NEXT200/200 B85200512 line turbo pumps. We also service Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured In Stock
Item#: PN40945 Mfr Part#: B85200522 / B852-00-522 Manufacturer: Edwards Vacuum
Price upon request

Agilent Edwards NEXT 200/200D, VERT 160 W Special Turbo Pump, Dual ISO100 Inlet, Edwards NEXT200200D, B85200522


Agilent NEXT200/200D p/n turbo pumps are designed to be operated within Agilent Agilent 8800 ICPMS instrument

Pump manufactured by Edwards for Agilent NEXT200200D V.160 W p/n B85200522 is split flow compound turbomolecular pump

Agilent NEXT 200200 D is a replacement for obsolete Split Flow Turbo Pump B852-00-522

Agilent Split Flow Turbo Pump NEXT200/200 is a part of Agilent 8800 ICPMS instrument 

Please refer to operation manual for specifications.


A&J Vacuum also repair / rebuild and service Agilent NEXT 200200D  Turbo Pumps as well as all other Edwards NEXT200/200 B85200522 line turbo pumps. We also service Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured In Stock
Item#: PN20319 Mfr Part#: B81200100 Manufacturer: Edwards Vacuum
PRICE: $10,550.00
WEB SAVINGS: $3,600.00
YOU PAY: $6,950.00

Fully Remanufactured Edwards nEXT 240 D Turbomolecular Vacuum Pump, ISO100, 160 W, B812-00-100

 

Edwards nEXT 240D Overview


The nEXT 240D Turbo pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The Edwards controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

Fully Remanufactured Edwards nEXT 240 Turbo pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 240 Turbo pump have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

Edwards nEXT 240 Pump have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT 240D Pumping Speed:


Edwards next 240d pumping speed, B81200100, B812-00-100

 

Edwards nEXT 240D Dimensions:


Edwards next 240d pumping speed, B81200100, B812-00-100


Click Here for Edwards nEXT Series Manual

Click Here for Edwards nEXT Brochure


A&J Vacuum also Repair / Rebuild and Rervice all Edwards EXT and nEXT Turbo Pumps Edwards Vacuum Gauges with Edwards Scroll Vacuum Pumps Edwards Turbo Pump repair, Edwards Vane Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured In Stock
Item#: PN31574 Mfr Part#: B81200102 Manufacturer: Edwards Vacuum
PRICE: $10,550.00
WEB SAVINGS: $4,600.00
YOU PAY: $5,950.00

Fully Remanufactured Edwards nEXT 240D Turbo Pump, ISO100, 110 W, B81200102, B812-00-102

 

Edwards nEXT 240D Overview


The nEXT 240D Turbo pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The Edwards controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

Fully Remanufactured Edwards nEXT 240 Turbo pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 240 Turbo pump have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

Edwards nEXT 240 Pump have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT 240D Pumping Speed:


Edwards next 240d pumping speed, B81200100, B812-00-100

 

Edwards nEXT 240D Dimensions:


Edwards next 240d pumping speed, B81200100, B812-00-100


Click Here for Edwards nEXT Series Manual

Click Here for Edwards nEXT Brochure


A&J Vacuum also Repair / Rebuild and Rervice all Edwards EXT and nEXT Turbo Pumps Edwards Vacuum Gauges with Edwards Scroll Vacuum Pumps Edwards Turbo Pump repair, Edwards Vane Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured In Stock
Item#: PN40972 Mfr Part#: B8G410B01 / B8G 410 B01 Manufacturer: Edwards Vacuum
PRICE: $7,351.00
WEB SAVINGS: $2,656.00
YOU PAY: $4,695.00

Fully Rebuilt Edwards nEXT 85 H Turbo Pump, DN 63 ISO, NW16, 80 W, B8G410B01, B8G 410 B01

 

Edwards nEXT 85 H Turbo Pump Overview;


The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT-85H Features


  • Class leading performance in a reduced footprint
  • Enhanced customer choice with standard and compression focused variants
  • Increased operating envelope maximised by Edwards’ patented direct impeller temperature measurement technology
  • Additional flexibility from customised interstage and backing port position selection
  • 4 year service with full end-user field serviceability
  • CMSD enabled low vibration levels
  • Intelligent pumps with included micro USB port and Edwards nST software allowing pump monitoring, control and configuration
  • Full suite of tailored accessories

 

Edwards nEXT-85 are two main variants 


  • Duplex - “D” - variants with both turbomolecular and drag stages for improved tolerance to higher backing line pressures.
  • High Compression - “H” - variant employs the same technology as the 'D' variant, but is tuned to deliver higher compression

 

Edwards nEXT85H Pumping Speed


Edwards nEXT85 next 85 next-85 Pumping Speed, B8G410B01

 

Edwards nEXT85H Dimensions


Edwards nEXT85 next 85 next-85 Dimensions, B8G410B01


Click Here for Edwards nEXT85H nEXT 85H nEXT-85H Manual


Photo "Asset: Atlas Copco"


A&J Vacuum Services offers full repair/service of Edwards nEXT Turbo Pumps, along with all other brands offered on our website. AJVS also services Edwards Vacuum Pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.


Condition: Remanufactured In Stock
Item#: PN41254 Mfr Part#: B8G210C01 Manufacturer: Edwards Vacuum
PRICE: $8,582.00
WEB SAVINGS: $4,291.00
YOU PAY: $4,291.00

Refurbished Edwards nEXT 85 D Turbo Pump, CF 63, NW16, 80 W, B8G210C01, B8G 210 C01

 

Edwards nEXT85D Overview


The nEXT 85D pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 D pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

nEXT 85D pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 85 D pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT85D Features


  • Class leading performance in a reduced footprint
  • Enhanced customer choice with standard and compression focused variants
  • Increased operating envelope maximised by Edwards’ patented direct impeller temperature measurement technology
  • Additional flexibility from customised interstage and backing port position selection
  • 4 year service with full end-user field serviceability
  • CMSD enabled low vibration levels
  • Intelligent pumps with included micro USB port and Edwards nST software allowing pump monitoring, control and configuration
  • Full suite of tailored accessories

 

Edwards nEXT 85 are two main variants 


  • Duplex - “D” - variants with both turbomolecular and drag stages for improved tolerance to higher backing line pressures.
  • High Compression - “H” - variant employs the same technology as the 'D' variant, but is tuned to deliver higher compression

 

Edwards nEXT85D Pumping Speed


Edwards nEXT85 next 85 next-85 Pumping Speed, B8G210c01

 

Edwards nEXT85D Dimensions


Edwards nEXT85 next 85 next-85 Dimensions, B8G210c01


Click Here for Edwards nEXT85D nEXT 85D nEXT-85D Manual


Photo "Asset: Atlas Copco"


A&J Vacuum Services offers full repair/service of Edwards nEXT Turbo Pumps, along with all other brands offered on our website. AJVS also services Edwards Vacuum Pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.


Condition: Remanufactured In Stock
Item#: PN16784 Mfr Part#: B823-22-100 Manufacturer: Edwards Vacuum
Price upon request

Fully Remanufactured Edwards nEXT 300 T Turbomolecular Vacuum Pump, DN 100 ISO-K, 160 W, B82322100

 

Edwards nEXT 300T Overview


The nEXT 300T Turbo pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The Edwards controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

Fully Remanufactured Edwards nEXT 300 Turbo pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 300 Turbo pump have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

Edwards nEXT 300 Pump have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT 300T Dimensions:


Edwards next 300t pumping speed, B82322100, B823-22-100


Click Here for Edwards nEXT Series Manual

Click Here for Edwards nEXT Brochure


A&J Vacuum also Repair / Rebuild and Rervice all Edwards EXT and nEXT Turbo Pumps Edwards Vacuum Gauges with Edwards Scroll Vacuum Pumps Edwards Turbo Pump repair, Edwards Vane Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN16785 Mfr Part#: B823-22-101 Manufacturer: Edwards Vacuum
Price upon request

Fully Remanufactured Edwards nEXT 300 T Turbomolecular Vacuum Pump, DN 100 ISO-K, 80 W, B82322101

 

Edwards nEXT 300T Overview


The nEXT 300T Turbo pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The Edwards controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

Fully Remanufactured Edwards nEXT 300 Turbo pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 300 Turbo pump have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

Edwards nEXT 300 Pump have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT 300T Dimensions:


Edwards next 300t pumping speed, B82322100, B823-22-100


Click Here for Edwards nEXT Series Manual

Click Here for Edwards nEXT Brochure


A&J Vacuum also Repair / Rebuild and Rervice all Edwards EXT and nEXT Turbo Pumps Edwards Vacuum Gauges with Edwards Scroll Vacuum Pumps Edwards Turbo Pump repair, Edwards Vane Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN16786 Mfr Part#: B833-22-300 Manufacturer: Edwards Vacuum
Price upon request

Fully Remanufactured Edwards nEXT 400 T Turbomolecular Vacuum Pump, DN 160 ISO-K, 160 W, B83322300

 

Edwards nEXT 400T Overview


The nEXT 400T Turbo pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics.

The Edwards controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller.

Fully Remanufactured Edwards nEXT 400 Turbo pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump.

The nEXT 400 Turbo pump have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller.

Edwards nEXT 400 Pump have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply.

 

Edwards nEXT 400T Dimensions:


Edwards next 400t pumping speed, B82322100, B823-22-100


Click Here for Edwards nEXT Series Manual

Click Here for Edwards nEXT Brochure


A&J Vacuum also Repair / Rebuild and Rervice all Edwards EXT and nEXT Turbo Pumps Edwards Vacuum Gauges with Edwards Scroll Vacuum Pumps Edwards Turbo Pump repair, Edwards Vane Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.