phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
Main Categories

- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS

Vacuum Hardware

- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: Reducers & Adaptors
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 6 products
Item#: PN07806 Mfr Part#: ASA5OGKA40 Manufacturer: AJVS
PRICE: $175.00
WEB SAVINGS: $19.05
YOU PAY: $155.95

Tubular Adapter KF to ANSI, KF40 (NW 40 Flange) to ASA 1.5 inch, with Groove, Stainless Steel Vacuum Fitting, PN07806


Adapter KF to ANSI, KF40 (NW40 Flange) to ASA 1.5 inch with o-ring groove, Stainless Steel Vacuum Fitting Dimensions:

  • A: 5 in / 127 mm

  • B: 2.17 in / 55 mm

  • C: 1.65 in / 42 mm

  • D: 1.5 in / 38.1 mm

  • E: 2.5 in / 63.5 mm

  • F: 0.62 x 4 in / 15.8 x 4 mm

  • B.C: 3.87 in / 98.4 mm


Overview

Adapter KF to ANSI, KF40 (NW40 Flange) to ASA 1.5 inch with Groove, Stainless Steel Vacuum Fitting, PN07806

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF40 to ASA 1.5 Tubular Adapters are made out of stainless steel, without the ring groove. The KF Tubular Assemblies connect the ISO-KF Flange with ASA vacuum fitting. The KF 40 to ASA 1.5 inch Adapter assemblies consist of two flanges, a centering ring, and an aluminum clamp. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring, to generate vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 40 to ASA 1.5 inch, O-ring Groove, Stainless Steel Vacuum Fitting Tubular Adapter.

The KF to NPT Female Pipe Adapters are available in the following sizes:

  • NW 40 to ASA 1.0 inch
  • NW 50 to ASA 1.0 inch
  • NW 40 to ASA 1.5 inch
  • NW 50 to ASA 1.5 inch
  • NW 40 to ASA 3.0 inch
  • NW 50 to ASA 3.0 inch

Condition: New In Stock
Item#: PN07804 Mfr Part#: ASA4OGKA40 Manufacturer: AJVS
PRICE: $160.00
WEB SAVINGS: $11.05
YOU PAY: $148.95

Tubular Adapter KF to ANSI, KF40 (NW 40 Flange) to ASA 1.0 inch, with Groove, Stainless Steel Vacuum Fitting, PN07804


Adapter KF to ANSI, KF40 (NW40 Flange) to ASA 1.0 inch with o-ring groove, Stainless Steel Vacuum Fitting Dimensions:

  • A: 4.25 in / 108 mm

  • B: 2.17 in / 55 mm

  • C: 1.65 in / 42 mm

  • D: 1.5 in / 38.1 mm

  • E: 1.87 in / 47.5 mm

  • F: 0.62 x 4 in / 15.8 x 4 mm

  • B.C: 3.13 in / 79.4 mm


Overview

Adapter KF to ANSI, KF40 (NW40 Flange) to ASA 1.0 inch with Groove, Stainless Steel Vacuum Fitting, PN07804

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF40 to ASA 1.0 Tubular Adapters are made out of stainless steel, without the ring groove. The KF Tubular Assemblies connect the ISO-KF Flange with ASA vacuum fitting. The KF 40 to ASA 1.0 inch Adapter assemblies consist of two flanges, a centering ring, and an aluminum clamp. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring, to generate vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 40 to ASA 1.0 inch, O-ring Groove, Stainless Steel Vacuum Fitting Tubular Adapter.

The KF to NPT Female Pipe Adapters are available in the following sizes:

  • NW 40 to ASA 1.0 inch
  • NW 50 to ASA 1.0 inch
  • NW 40 to ASA 1.5 inch
  • NW 50 to ASA 1.5 inch
  • NW 40 to ASA 3.0 inch
  • NW 50 to ASA 3.0 inch

Condition: New
Item#: PN07805 Mfr Part#: ASA4OGKA50 Manufacturer: AJVS
PRICE: $185.00
WEB SAVINGS: $40.00
YOU PAY: $145.00

Tubular Adapter KF to ANSI, KF50 (NW 50 Flange) to ASA 1.0 inch, with Groove, Stainless Steel Vacuum Fitting, PN07805


Adapter KF to ANSI, KF50 (NW50 Flange) to ASA 1.0 inch with o-ring groove, Stainless Steel Vacuum Fitting Dimensions:

  • A: 4.25 in / 108 mm

  • B: 2.95 in / 75 mm

  • C: 1.65 in / 42 mm

  • D: 2 in / 50.8 mm

  • E: 1.87 in / 47.5 mm

  • F: 0.62 x 4 in / 15.8 x 4 mm

  • B.C: 3.13 in / 79.4 mm


Overview

Adapter KF to ANSI, KF50 (NW50 Flange) to ASA 1.0 inch with Groove, Stainless Steel Vacuum Fitting, PN07805

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF50 to ASA 1.0 Tubular Adapters are made out of stainless steel, without the ring groove. The KF Tubular Assemblies connect the ISO-KF Flange with ASA vacuum fitting. The KF 50 to ASA 1.0 inch Adapter assemblies consist of two flanges, a centering ring, and an aluminum clamp. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring, to generate vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 50 to ASA 1.0 inch, O-ring Groove, Stainless Steel Vacuum Fitting Tubular Adapter.

The KF to NPT Female Pipe Adapters are available in the following sizes:

  • NW 40 to ASA 1.0 inch
  • NW 50 to ASA 1.0 inch
  • NW 40 to ASA 1.5 inch
  • NW 50 to ASA 1.5 inch
  • NW 40 to ASA 3.0 inch
  • NW 50 to ASA 3.0 inch

 


Condition: New
Item#: PN07808 Mfr Part#: ASA7OGKA40 Manufacturer: AJVS
PRICE: $325.00
WEB SAVINGS: $25.02
YOU PAY: $299.98

Tubular Adapter KF to ANSI, KF40 (NW 40 Flange) to ASA 3.0 inch, with Groove, Stainless Steel Vacuum Fitting, PN07808


Adapter KF to ANSI, KF40 (NW40 Flange) to ASA 3.0 inch with o-ring groove, Stainless Steel Vacuum Fitting Dimensions:

  • A: 7.5 in / 190.5 mm

  • B: 2.17 in / 55 mm

  • C: 1.65 in / 42 mm

  • D: 1.5 in / 38.1 mm

  • E: 4.63 in / 117.5 mm

  • F: 0.75 x 4 in / 19 x 4 mm

  • B.C: 6 in / 152.4 mm


Overview

Adapter KF to ANSI, KF40 (NW40 Flange) to ASA 3.0 inch with Groove, Stainless Steel Vacuum Fitting, PN07808

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF40 to ASA 3.0 Tubular Adapters are made out of stainless steel, without the ring groove. The KF Tubular Assemblies connect the ISO-KF Flange with ASA vacuum fitting. The KF 40 to ASA 3.0 inch Adapter assemblies consist of two flanges, a centering ring, and an aluminum clamp. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring, to generate vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 40 to ASA 3.0 inch, O-ring Groove, Stainless Steel Vacuum Fitting Tubular Adapter.

The KF to NPT Female Pipe Adapters are available in the following sizes:

  • NW 40 to ASA 1.0 inch
  • NW 50 to ASA 1.0 inch
  • NW 40 to ASA 1.5 inch
  • NW 50 to ASA 1.5 inch
  • NW 40 to ASA 3.0 inch
  • NW 50 to ASA 3.0 inch

Condition: New
Item#: PN07807 Mfr Part#: ASA5OGKA50 Manufacturer: AJVS
PRICE: $199.00
WEB SAVINGS: $14.00
YOU PAY: $185.00

Tubular Adapter KF to ANSI, KF50 (NW 50 Flange) to ASA 1.5 inch, with Groove, Stainless Steel Vacuum Fitting, PN07807


Adapter KF to ANSI, KF50 (NW50 Flange) to ASA 1.5 inch with o-ring groove, Stainless Steel Vacuum Fitting Dimensions:

  • A: 5 in / 127 mm

  • B: 2.95 in / 75 mm

  • C: 1.65 in / 42 mm

  • D: 2 in / 50.8 mm

  • E: 2.5 in / 63.5 mm

  • F: 0.62 x 4 in / 15.8 x 4 mm

  • B.C: 3.87 in / 98.4 mm


Overview

Adapter KF to ANSI, KF50 (NW50 Flange) to ASA 1.5 inch with Groove, Stainless Steel Vacuum Fitting, PN07807

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF50 to ASA 1.5 Tubular Adapters are made out of stainless steel, without the ring groove. The KF Tubular Assemblies connect the ISO-KF Flange with ASA vacuum fitting. The KF 50 to ASA 1.5 inch Adapter assemblies consist of two flanges, a centering ring, and an aluminum clamp. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring, to generate vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 50 to ASA 1.5 inch, O-ring Groove, Stainless Steel Vacuum Fitting Tubular Adapter.

The KF to NPT Female Pipe Adapters are available in the following sizes:

  • NW 40 to ASA 1.0 inch
  • NW 50 to ASA 1.0 inch
  • NW 40 to ASA 1.5 inch
  • NW 50 to ASA 1.5 inch
  • NW 40 to ASA 3.0 inch
  • NW 50 to ASA 3.0 inch


Condition: New
Item#: PN07809 Mfr Part#: ASA7OGKA50 Manufacturer: AJVS
PRICE: $299.00
WEB SAVINGS: $34.00
YOU PAY: $265.00

Tubular Adapter KF to ANSI, KF50 (NW 50 Flange) to ASA 3.0 inch, with Groove, Stainless Steel Vacuum Fitting, PN07809


Adapter KF to ANSI, KF50 (NW50 Flange) to ASA 3.0 inch with o-ring groove, Stainless Steel Vacuum Fitting Dimensions:

  • A: 7.5 in / 190.5 mm

  • B: 2.95 in / 75 mm

  • C: 1.65 in / 42 mm

  • D: 2 in / 50.8 mm

  • E: 4.63 in / 117.5 mm

  • F: 0.75 x 4 in / 19 x 4 mm

  • B.C: 6 in / 152.4 mm


Overview

Adapter KF to ANSI, KF50 (NW50 Flange) to ASA 3.0 inch with Groove, Stainless Steel Vacuum Fitting, PN07809

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF50 to ASA 3.0 Tubular Adapters are made out of stainless steel, without the ring groove. The KF Tubular Assemblies connect the ISO-KF Flange with ASA vacuum fitting. The KF 50 to ASA 3.0 inch Adapter assemblies consist of two flanges, a centering ring, and an aluminum clamp. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring, to generate vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 50 to ASA 3.0 inch, O-ring Groove, Stainless Steel Vacuum Fitting Tubular Adapter.

The KF to NPT Female Pipe Adapters are available in the following sizes:

  • NW 40 to ASA 1.0 inch
  • NW 50 to ASA 1.0 inch
  • NW 40 to ASA 1.5 inch
  • NW 50 to ASA 1.5 inch
  • NW 40 to ASA 3.0 inch
  • NW 50 to ASA 3.0 inch


Condition: New
Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.