phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
Main Categories

- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS

Vacuum Hardware

- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: Reducers & Adaptors
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 8 products
Item#: PN07832 Mfr Part#: KF40SWA6 Manufacturer: AJVS
PRICE: $151.02
WEB SAVINGS: $62.02
YOU PAY: $89.00

Swagelok Adapter, KF 40 (NW 40) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07832


Adapter KF to Swagelok, KF 40 (NW40 Flange) to 1/4 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:

  • A: 2.17 in / 55 mm

  • B: 0.19 in / 4.8 mm

  • C: 1.44 in / 36.6 mm


Overview

Swagelok Adapter, KF 40 (NW 40) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07832

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 40 to Swagelok 0.25 inch, Stainless Steel Vacuum Fitting Adapter.

The KF to Swagelok Adapters are available in the following sizes:

  • NW 16 x 1/4" Swagelok

  • NW 16 x 1/2" Swagelok

  • NW 25 x 1/4" Swagelok

  • NW 25 x 1/2" Swagelok

  • NW 40 x 1/4" Swagelok

  • NW 40 x 1/2" Swagelok

  • NW 50 x 1/4" Swagelok

  • NW 50 x 1/2" Swagelok


Condition: New In Stock
Item#: PN07829 Mfr Part#: KF16SWA13 Manufacturer: AJVS
PRICE: $155.00
WEB SAVINGS: $70.01
YOU PAY: $84.99

Swagelok Adapter, KF 16 (NW 16) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07829


Adapter KF to Swagelok, KF 16 (NW16 Flange) to 1/2 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.18 in / 30 mm

  • B: 0.43 in / 10.8 mm

  • C: 1.77 in / 45 mm


Overview

Swagelok Adapter, KF 16 (NW 16) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07829

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 16 to Swagelok 0.5 inch, Stainless Steel Vacuum Fitting Adapter.

The KF to Swagelok Adapters are available in the following sizes:

  • NW 16 x 1/4" Swagelok

  • NW 16 x 1/2" Swagelok

  • NW 25 x 1/4" Swagelok

  • NW 25 x 1/2" Swagelok

  • NW 40 x 1/4" Swagelok

  • NW 40 x 1/2" Swagelok

  • NW 50 x 1/4" Swagelok

  • NW 50 x 1/2" Swagelok

 


Condition: New In Stock
Item#: PN07834 Mfr Part#: KF50SWA6 Manufacturer: AJVS
PRICE: $149.00
WEB SAVINGS: $32.00
YOU PAY: $117.00

Swagelok Adapter, KF 50 (NW 50) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07834


Adapter KF to Swagelok, KF 50 (NW50 Flange) to 1/4 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:

  • A: 2.95 in / 75 mm

  • B: 0.19 in / 4.8 mm

  • C: 1.44 in / 36.6 mm


Overview

Swagelok Adapter, KF 50 (NW 50) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07834

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 50 to Swagelok 0.25 inch, Stainless Steel Vacuum Fitting Adapter.

The KF to Swagelok Adapters are available in the following sizes:

  • NW 16 x 1/4" Swagelok

  • NW 16 x 1/2" Swagelok

  • NW 25 x 1/4" Swagelok

  • NW 25 x 1/2" Swagelok

  • NW 40 x 1/4" Swagelok

  • NW 40 x 1/2" Swagelok

  • NW 50 x 1/4" Swagelok

  • NW 50 x 1/2" Swagelok


Condition: New In Stock
Item#: PN07830 Mfr Part#: KF25SWA6 Manufacturer: AJVS
PRICE: $158.40
WEB SAVINGS: $36.41
YOU PAY: $121.99

Swagelok Adapter, KF 25 (NW 25) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07830


Adapter KF to Swagelok, KF 25 (NW25 Flange) to 1/4 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.57 in / 40 mm

  • B: 0.19 in / 4.8 mm

  • C: 1.44 in / 36.6 mm


Overview

Swagelok Adapter, KF 25 (NW 25) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07830

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 25 to Swagelok 0.25 inch, Stainless Steel Vacuum Fitting Adapter.

The KF to Swagelok Adapters are available in the following sizes:

  • NW 16 x 1/4" Swagelok

  • NW 16 x 1/2" Swagelok

  • NW 25 x 1/4" Swagelok

  • NW 25 x 1/2" Swagelok

  • NW 40 x 1/4" Swagelok

  • NW 40 x 1/2" Swagelok

  • NW 50 x 1/4" Swagelok

  • NW 50 x 1/2" Swagelok


Condition: New In Stock
Item#: PN07831 Mfr Part#: KF25SWA13 Manufacturer: AJVS
PRICE: $200.00
WEB SAVINGS: $50.00
YOU PAY: $150.00

Swagelok Adapter, KF 25 (NW 25) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07831


Adapter KF to Swagelok, KF 25 (NW 25 Flange) to 1/2 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.57 in / 40 mm

  • B: 0.43 in / 10.8 mm

  • C: 2.14 in / 54.3 mm


Overview

Swagelok Adapter, KF 25 (NW 25) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07831

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 25 to Swagelok 0.5 inch, Stainless Steel Vacuum Fitting Adapter.

The KF to Swagelok Adapters are available in the following sizes:

  • NW 16 x 1/4" Swagelok

  • NW 16 x 1/2" Swagelok

  • NW 25 x 1/4" Swagelok

  • NW 25 x 1/2" Swagelok

  • NW 40 x 1/4" Swagelok

  • NW 40 x 1/2" Swagelok

  • NW 50 x 1/4" Swagelok

  • NW 50 x 1/2" Swagelok


Condition: New In Stock
Item#: PN07833 Mfr Part#: KF40SWA13 Manufacturer: AJVS
PRICE: $168.00
WEB SAVINGS: $79.01
YOU PAY: $88.99

Swagelok Adapter, KF 40 (NW 40) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07833


Adapter KF to Swagelok, KF 40 (NW40 Flange) to 1/2 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:

  • A: 2.17 in / 55 mm

  • B: 0.43 in / 10.8 mm

  • C: 2.14 in / 54.3 mm


Overview

Swagelok Adapter, KF 40 (NW 40) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07833

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 40 to Swagelok 0.5 inch, Stainless Steel Vacuum Fitting Adapter.

The KF to Swagelok Adapters are available in the following sizes:

  • NW 16 x 1/4" Swagelok

  • NW 16 x 1/2" Swagelok

  • NW 25 x 1/4" Swagelok

  • NW 25 x 1/2" Swagelok

  • NW 40 x 1/4" Swagelok

  • NW 40 x 1/2" Swagelok

  • NW 50 x 1/4" Swagelok

  • NW 50 x 1/2" Swagelok

 


Condition: New In Stock
Item#: PN07828 Mfr Part#: KF16SWA6 Manufacturer: AJVS
PRICE: $154.99
WEB SAVINGS: $49.99
YOU PAY: $105.00

Swagelok Adapter, KF 16 (NW 16) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07828


Adapter KF to Swagelok, KF 16 (NW16 Flange) to 1/4 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.18 in / 30 mm

  • B: 0.19 in / 4.8 mm

  • C: 1.44 in / 36.6 mm


Overview

Swagelok Adapter, KF 16 (NW 16) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07828

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 16 to Swagelok 0.25 inch, Stainless Steel Vacuum Fitting Adapter.

The KF to Swagelok Adapters are available in the following sizes:

  • NW 16 x 1/4" Swagelok

  • NW 16 x 1/2" Swagelok

  • NW 25 x 1/4" Swagelok

  • NW 25 x 1/2" Swagelok

  • NW 40 x 1/4" Swagelok

  • NW 40 x 1/2" Swagelok

  • NW 50 x 1/4" Swagelok

  • NW 50 x 1/2" Swagelok

 


Condition: New
Item#: PN07835 Mfr Part#: KF50SWA13 Manufacturer: AJVS
PRICE: $180.00
WEB SAVINGS: $70.01
YOU PAY: $109.99

Swagelok Adapter, KF 50 (NW 50) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07835


Adapter KF to Swagelok, KF 50 (NW50 Flange) to 1/2 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:

  • A: 2.95 in / 75 mm

  • B: 0.43 in / 10.8 mm

  • C: 2.14 in / 54.3 mm


Overview

Swagelok Adapter, KF 50 (NW 50) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07835

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 50 to Swagelok 0.5 inch, Stainless Steel Vacuum Fitting Adapter.

The KF to Swagelok Adapters are available in the following sizes:

  • NW 16 x 1/4" Swagelok

  • NW 16 x 1/2" Swagelok

  • NW 25 x 1/4" Swagelok

  • NW 25 x 1/2" Swagelok

  • NW 40 x 1/4" Swagelok

  • NW 40 x 1/2" Swagelok

  • NW 50 x 1/4" Swagelok

  • NW 50 x 1/2" Swagelok


Condition: New
Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.