phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
Main Categories

- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS

Vacuum Hardware

- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: Reducers & Adaptors
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 11 products
Item#: PN07880 Mfr Part#: KF40RHAS Manufacturer: AJVS
PRICE: $87.00
WEB SAVINGS: $8.50
YOU PAY: $78.50

KF - Rubber Hose Adapter, KF 40 (NW 40) to 1 5/8" Barb, Stainless Steel Vacuum Fitting, PN07880


KF - Rubber Hose Adapter, KF 40 (NW 40 Flange) to 1 5/8 inch Barb, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.63 in / 41.3 mm

  • B: 1.57 in / 40 mm

  • C: 2.17 in / 55 mm


Overview

KF - Rubber Hose Adapter, KF 40 (NW 40) to 1 5/8" Barb, Stainless Steel Vacuum Fitting, PN07880

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 40 to 1 5/8 inch Compression Tube, Stainless Steel Vacuum Fitting.

The KF to Rubber Hose Adapters are available in the following sizes:

  • NW 10 x 5/8"

  • NW 16 x 3/4"

  • NW 16 x 5/8"

  • NW 25 x 1"

  • NW 25 x 7/8"

  • NW 40 x 1 5/8"

  • NW 40 x 1.5"

  • NW 50 x 1 7/8"

  • NW 50 x 2"


Condition: New In Stock
Item#: PN14582 Mfr Part#: KF50RHAS Manufacturer: AJVS
PRICE: $115.00
WEB SAVINGS: $11.00
YOU PAY: $104.00

KF - Rubber Hose Adapter, KF 50 (NW 50) to 1 7/8" Barb, Stainless Steel Vacuum Fitting, PN14582


KF - Rubber Hose Adapter, KF 50 (NW 50 Flange) to 1 7/8" inch Barb, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.88 in / 47.7 mm

  • B: 1.57 in / 40 mm

  • C: 2.95 in / 75 mm


Overview

KF - Rubber Hose Adapter, KF 50 (NW 50) to 1 7/8" Barb, Stainless Steel Vacuum Fitting, PN14582

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 50 to 1 7/8 inch Compression Tube, Stainless Steel Vacuum Fitting.

The KF to Rubber Hose Adapters are available in the following sizes:

  • NW 10 x 5/8"

  • NW 16 x 3/4"

  • NW 16 x 5/8"

  • NW 25 x 1"

  • NW 25 x 7/8"

  • NW 40 x 1 5/8"

  • NW 40 x 1.5"

  • NW 50 x 1 7/8"

  • NW 50 x 2"


Condition: New In Stock
Item#: PN14640 Mfr Part#: KF16RHAA Manufacturer: AJVS
PRICE: $25.00
WEB SAVINGS: $3.00
YOU PAY: $22.00

KF - Rubber Hose Adapter, KF 16 (NW 16) to 3/4" Barb, Stainless Steel Vacuum Fitting, PN14640


KF - Rubber Hose Adapter, KF 16 (NW 16 Flange) to 3/4 inch Barb, Stainless Steel Vacuum Fitting Dimensions:

  • A: 0.63 in / 16 mm

  • B: 1.57 in / 40 mm

  • C: 1.18 in / 30 mm


Overview

KF - Rubber Hose Adapter, KF 16 (NW 16) to 3/4" Barb, Stainless Steel Vacuum Fitting, PN14639

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 16 to 3/4 inch Compression Tube, Stainless Steel Vacuum Fitting.

The KF to Rubber Hose Adapters are available in the following sizes:

  • NW 10 x 5/8"

  • NW 16 x 3/4"

  • NW 16 x 5/8"

  • NW 25 x 1"

  • NW 25 x 7/8"

  • NW 40 x 1 5/8"

  • NW 40 x 1.5"

  • NW 50 x 1 7/8"

  • NW 50 x 2"


Condition: New In Stock
Item#: PN14641 Mfr Part#: KF25RHA Manufacturer: AJVS
PRICE: $26.40
WEB SAVINGS: $5.41
YOU PAY: $20.99

KF - Rubber Hose Adapter, KF 25 (NW 25) to 7/8" Barb, Aluminum Vacuum Fitting, PN14641


KF - Rubber Hose Adapter, KF 25 (NW 25) to 7/8" Barb, Aluminum Vacuum Fitting, PN14641

  • A: 0.87 in / 22.2 mm

  • B: 1.57 in / 40 mm

  • C: 1.57 in / 40 mm


KF - Rubber Hose Adapter, KF 25 (NW 25) to 7/8" Barb, Aluminum Vacuum Fitting, PN14641

Overview

KF - Rubber Hose Adapter, KF 25 (NW 25) to 7/8" Barb, Aluminum Vacuum Fitting, PN14641

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Rubber Hose Adapters are made out of Aluminum. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 25 to 7/8 inch Compression Tube, Stainless Steel Vacuum Fitting.

The KF to Rubber Hose Adapters are available in the following sizes:

  • NW 10 x 5/8"

  • NW 16 x 3/4"

  • NW 16 x 5/8"

  • NW 25 x 1"

  • NW 25 x 7/8"

  • NW 40 x 1 5/8"

  • NW 40 x 1.5"

  • NW 50 x 1 7/8"

  • NW 50 x 2"


Condition: New In Stock
Item#: PN14642 Mfr Part#: KF40RHA Manufacturer: AJVS
PRICE: $35.40
WEB SAVINGS: $8.90
YOU PAY: $26.50

KF - Rubber Hose Adapter, KF 40 (NW 40) to 1 5/8" Barb, Aluminum Vacuum Fitting, PN14642


KF - Rubber Hose Adapter, KF 40 (NW 40 Flange) to 1 5/8 inch Barb, Aluminum Vacuum Fitting Dimensions:

  • A: 1.63 in / 41.3 mm

  • B: 1.57 in / 40 mm

  • C: 2.17 in / 55 mm


Overview

KF - Rubber Hose Adapter, KF 40 (NW 40) to 1 5/8" Barb, Aluminum Vacuum Fitting, PN14642

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Rubber Hose Adapters  (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 40 to 1 5/8 inch Compression Tube, Aluminum Vacuum Fitting.

The KF to Rubber Hose Adapters are available in the following sizes:

  • NW 10 x 5/8"

  • NW 16 x 3/4"

  • NW 16 x 5/8"

  • NW 25 x 1"

  • NW 25 x 7/8"

  • NW 40 x 1 5/8"

  • NW 40 x 1.5"

  • NW 50 x 1 7/8"

  • NW 50 x 2"


Condition: New In Stock
Item#: PN14643 Mfr Part#: DY-KF50RHAA Manufacturer: AJVS
PRICE: $42.90
WEB SAVINGS: $3.90
YOU PAY: $39.00

KF - Rubber Hose Adapter, KF 50 (NW 50) to 1 7/8" Barb, Aluminum Vacuum Fitting, PN14643


KF - Rubber Hose Adapter, KF 50 (NW 50 Flange) to 1 7/8 inch Barb, Aluminum Vacuum Fitting Dimensions:

  • A: 1.88 in / 47.7 mm

  • B: 1.57 in / 40 mm

  • C: 2.95 in / 75 mm


Overview

KF - Rubber Hose Adapter, KF 50 (NW 50) to 1 7/8" Barb, Aluminum Vacuum Fitting, PN14643

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Rubber Hose Adapters  (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 50 to 1 7/8" Compression Tube, Aluminum Vacuum Fitting.

The KF to Rubber Hose Adapters are available in the following sizes:

  • NW 10 x 5/8"

  • NW 16 x 3/4"

  • NW 16 x 5/8"

  • NW 25 x 1"

  • NW 25 x 7/8"

  • NW 40 x 1 5/8"

  • NW 40 x 1.5"

  • NW 50 x 1 7/8"

  • NW 50 x 2"


Condition: New In Stock
Item#: PN17932 Mfr Part#: KF16RHAA63 Manufacturer: AJVS
PRICE: $28.00
WEB SAVINGS: $3.00
YOU PAY: $25.00

KF - Rubber Hose Adapter, KF 16 (NW 16) to 5/8" Barb, Aluminum Vacuum Fitting, PN17932


KF - Rubber Hose Adapter, KF 16 (NW 16 Flange) to 5/8 inch Barb, Aluminum Vacuum Fitting Dimensions:

  • A: 0.75 in / 19.1 mm

  • B: 1.57 in / 40 mm

  • C: 1.18 in / 30 mm


Overview

KF - Rubber Hose Adapter, KF 16 (NW 16) to 5/8" Barb, Aluminum Vacuum Fitting, PN17932

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Rubber Hose Adapters are made out of Aluminum. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 16 to 5/8 inch Compression Tube, Stainless Steel Vacuum Fitting.

The KF to Rubber Hose Adapters are available in the following sizes:

  • NW 10 x 5/8"

  • NW 16 x 3/4"

  • NW 16 x 5/8"

  • NW 25 x 1"

  • NW 25 x 7/8"

  • NW 40 x 1 5/8"

  • NW 40 x 1.5"

  • NW 50 x 1 7/8"

  • NW 50 x 2"


Condition: New In Stock
Item#: PN19761 Mfr Part#: QF25-100-SH Manufacturer: AJVS
PRICE: $35.00
WEB SAVINGS: $7.40
YOU PAY: $27.60

KF - Rubber Hose Adapter, KF 25 (NW 25) to 1" Barb, Stainless Steel Vacuum Fitting, PN19761


KF - Rubber Hose Adapter, KF 25 (NW 25 Flange) to 1 inch Barb, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.00 in / 22.4 mm

  • B: 1.50 in / 38.1 mm


Overview

KF - Rubber Hose Adapter, KF 25 (NW 25) to 1" Barb, Stainless Steel Vacuum Fitting, PN19761

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 25 to 1 inch Compression Tube, Stainless Steel Vacuum Fitting.

The KF to Rubber Hose Adapters are available in the following sizes:

  • NW 10 x 5/8"

  • NW 16 x 3/4"

  • NW 16 x 5/8"

  • NW 25 x 1"

  • NW 25 x 7/8"

  • NW 40 x 1 5/8"

  • NW 40 x 1.5"

  • NW 50 x 1 7/8"

  • NW 50 x 2"

 

 


Condition: New In Stock
Item#: PN40725 Mfr Part#: PN40725 Manufacturer: AJVS
PRICE: $22.65
WEB SAVINGS: $1.65
YOU PAY: $21.00

KF - Rubber Hose Adapter, KF 16 (NW 16) to 3/4" Barb, Aluminum Vacuum Fitting, PN40725


KF - Rubber Hose Adapter, KF 16 (NW 16 Flange) to 3/4 inch Barb, Aluminum Vacuum Fitting Dimensions:

  • A: 

  • B: 1.57 in / 40 mm

  • C: 1.18 in / 30 mm


Overview

KF - Rubber Hose Adapter, KF 16 (NW 16) to 3/4" Barb, Stainless Steel Vacuum Fitting, PN14639

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 16 to 3/4 inch Compression Tube, Stainless Steel Vacuum Fitting.

The KF to Rubber Hose Adapters are available in the following sizes:

  • NW 10 x 5/8"

  • NW 16 x 3/4"

  • NW 16 x 5/8"

  • NW 25 x 1"

  • NW 25 x 7/8"

  • NW 40 x 1 5/8"

  • NW 40 x 1.5"

  • NW 50 x 1 7/8"

  • NW 50 x 2"


Condition: New In Stock
Item#: PN14639 Mfr Part#: DY-KF10RHAA Manufacturer: AJVS
PRICE: $23.76
WEB SAVINGS: $2.16
YOU PAY: $21.60

KF - Rubber Hose Adapter, KF 10 (NW 10) to 5/8" Barb, Stainless Steel Vacuum Fitting, PN14639


KF - Rubber Hose Adapter, KF 10 (NW 10 Flange) to 5/8 inch Barb, Stainless Steel Vacuum Fitting Dimensions:

  • A: 0.63 in / 16 mm

  • B: 1.57 in / 40 mm

  • C: 1.18 in / 30 mm


Overview

KF - Rubber Hose Adapter, KF 10 (NW 10) to 5/8" Barb, Stainless Steel Vacuum Fitting, PN14639

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - Rubber Hose Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF - Rubber Hose Adapter KF 10 to 5/8 inch Compression Tube, Stainless Steel Vacuum Fitting.

The KF to Rubber Hose Adapters are available in the following sizes:

  • NW 10 x 5/8"

  • NW 16 x 3/4"

  • NW 16 x 5/8"

  • NW 25 x 1"

  • NW 25 x 7/8"

  • NW 40 x 1 5/8"

  • NW 40 x 1.5"

  • NW 50 x 1 7/8"

  • NW 50 x 2"

 


Condition: New
Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.