Fully Refurbished Pfeiffer Vacuum TPH 510C Plasma Corrosive Turbo Pump with an ISO 160 Inlet Flange and KF 40 Outlet Flange.
This pump has a free of wear permanent magnetic bearing at the high vacuum side and an oil lubricated ceramic bearing at the backing side. The Turbo Pumps TMH and TMU models are identical in terms of design, they only differ in their intake flange. This pump has been thoroughly tested and is ready for a wide range of applications in the research industry.
A&J Vacuum also repair / rebuild and service Pfeiffer TPH 510 C Plasma / PM P01 381 Turbo Pumps along with all other Pfeiffer Vacuum pumps and Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
TPU 510 | ||
Intake flange | DN 160 ISO | |
Fore-vacuum flange | DN 40 KF | |
Volume flow rate | ||
N2 | l/s | 500 |
He | l/s | 570 |
H2 | l/s | 500 |
Rec Backing Pump | 12 | |
Acc electronic drive unit | TCP 300 (TCP 300),TCP 310 (TCP 310),TCP 380 | |
Compression ratio | ||
N2 | 8x10^8 | |
He | 1.5x10^4 | |
H2 | 1x10^3 | |
Ultimate pressure | mbar | 10^-11 |
Ultimate operating | mbar | <1x10^-10 |
Pressure | mbar | <1x10^-9 |
3 | mbar | <1x10^-8 |
Speed | rpm | 60,000 |
Start-up time with TCP 300 (TCP 300)/310 | min | 6 |
Start-up time with TCP 120 (TCP 120)/121 | min | |
Permissible magnetic field | mT | 6 |
Oil filling | cm^3 | 2x10 |
Cooling water req | l/h | 15 |
Cooling water temperature | C | 5-25 |
Permissible ambient temperature for air cooing | C | 0-35 |
Power input of heater | Watt | 250 |
weight | kg | 30 |
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Fully Refurbished Pfeiffer Vacuum TPH 510C Plasma Corrosive Turbo Pump with an ISO 160 Inlet Flange and KF 40 Outlet Flange.
This pump has a free of wear permanent magnetic bearing at the high vacuum side and an oil lubricated ceramic bearing at the backing side. The Turbo Pumps TMH and TMU models are identical in terms of design, they only differ in their intake flange. This pump has been thoroughly tested and is ready for a wide range of applications in the research industry.
A&J Vacuum also repair / rebuild and service Pfeiffer TPH 510 C Plasma / PM P01 381 Turbo Pumps along with all other Pfeiffer Vacuum pumps and Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
TPU 510 | ||
Intake flange | DN 160 ISO | |
Fore-vacuum flange | DN 40 KF | |
Volume flow rate | ||
N2 | l/s | 500 |
He | l/s | 570 |
H2 | l/s | 500 |
Rec Backing Pump | 12 | |
Acc electronic drive unit | TCP 300 (TCP 300),TCP 310 (TCP 310),TCP 380 | |
Compression ratio | ||
N2 | 8x10^8 | |
He | 1.5x10^4 | |
H2 | 1x10^3 | |
Ultimate pressure | mbar | 10^-11 |
Ultimate operating | mbar | <1x10^-10 |
Pressure | mbar | <1x10^-9 |
3 | mbar | <1x10^-8 |
Speed | rpm | 60,000 |
Start-up time with TCP 300 (TCP 300)/310 | min | 6 |
Start-up time with TCP 120 (TCP 120)/121 | min | |
Permissible magnetic field | mT | 6 |
Oil filling | cm^3 | 2x10 |
Cooling water req | l/h | 15 |
Cooling water temperature | C | 5-25 |
Permissible ambient temperature for air cooing | C | 0-35 |
Power input of heater | Watt | 250 |
weight | kg | 30 |
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.