Turbovac TW
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
- Fully Remanufctured
- 800051V0023
- N 160 ISO Inlet Flange
- Air Cooled
Fully Remanufactured Leybold TW 701 Turbo Pump 800051V0021 with Turbo Drive L Controller 800071V0002,Air Cooled, DN 160 ISO Inlet Flange
Leybold Turbovac TW 701 / 800051V0021 Overview:
The Leybold TURBOVAC TW 700 and TW 701 is a turbomolecular pump with compound stage. The frequency converter is integrated. The pump is designed to evacuate vacuum chambers down to pressure levels in the high vacuum range. It is suitable for pumping air and/or clean gases. A forevacuum pump is required for its operation.
These pumps are not suitable for:
- pumping liquids
- pumping corrosive or reactive gasses
- operation without a forevacuum pump
During operation the pressure inside the pump is so low that there is no danger of ignition (at pressures below about 20 mbar). A hazardous condition will be created if flammable mixtures enter the hot pump at pressures above 20 mbar. During operation the pump can reach temperatures as high as 110°C (230 °F).
The TW701 pumps comprise essentially of the pump housing, a multi-stage rotor with the stator group, and the drive.
The TW 701 rotor consists of a turbomolecular pumping stage and a compound pumping stage (= Holweck stage). The Holweck pumping stage increases the permissible forevacuum pressure level markedly when compared with the classic turbomolecular pump.
The rotor shaft runs in two ceramic ball bearings, lubricated with grease.
Leybold TW701 Applications:
- Mass spectrometers
- Data Storage
- Flat panel displays
- Research and Development (UHV systems, Particle accelerators)
- Load locks and transfer chambers
Leybold TW701 Features and Advantages:
- Integrated frequency converter
- Operation in any orientation
- Highest pumping speed and throughput for Nitrogen and Argon
- High foreline tolerance allows the use of downsized fore-vacuum pumps
- Oil-free pump for generating clean high- and ultrahigh-vacuum conditions
- Space-saving
- Easy to integrate into complex vacuum systems
- High productivity
- Low operating costs
- Highly reliable operation
Leybold TW 701 Pumping Speed:
Leybold TW 701 Dimensions:
Click Here for Leybold TW 701 Brochure
A&J Vacuum Rrepair / Rebuild and Service Leybold TW701 800051V0023 Turbo Pumps Leybold Vacuum pumps, Oerlikon Leybold Turbo Pumping Stations along with all other Leybold Turbo Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Fully Remanufactured Leybold TW 701 Turbo Pump 800051V0021 with Turbo Drive L Controller 800071V0002,Air Cooled, DN 160 ISO Inlet Flange
Leybold TW 701 Technical Data:
Click Here for Leybold TW 701 Brochure
A&J Vacuum Rrepair / Rebuild and Service Leybold TW701 800051V0023 Turbo Pumps Leybold Vacuum pumps, Oerlikon Leybold Turbo Pumping Stations along with all other Leybold Turbo Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Leybold_TW_701_Brochure.pdf 
|
Service and Repair - Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Overview
Fully Remanufactured Leybold TW 701 Turbo Pump 800051V0021 with Turbo Drive L Controller 800071V0002,Air Cooled, DN 160 ISO Inlet Flange
Leybold Turbovac TW 701 / 800051V0021 Overview:
The Leybold TURBOVAC TW 700 and TW 701 is a turbomolecular pump with compound stage. The frequency converter is integrated. The pump is designed to evacuate vacuum chambers down to pressure levels in the high vacuum range. It is suitable for pumping air and/or clean gases. A forevacuum pump is required for its operation.
These pumps are not suitable for:
- pumping liquids
- pumping corrosive or reactive gasses
- operation without a forevacuum pump
During operation the pressure inside the pump is so low that there is no danger of ignition (at pressures below about 20 mbar). A hazardous condition will be created if flammable mixtures enter the hot pump at pressures above 20 mbar. During operation the pump can reach temperatures as high as 110°C (230 °F).
The TW701 pumps comprise essentially of the pump housing, a multi-stage rotor with the stator group, and the drive.
The TW 701 rotor consists of a turbomolecular pumping stage and a compound pumping stage (= Holweck stage). The Holweck pumping stage increases the permissible forevacuum pressure level markedly when compared with the classic turbomolecular pump.
The rotor shaft runs in two ceramic ball bearings, lubricated with grease.
Leybold TW701 Applications:
- Mass spectrometers
- Data Storage
- Flat panel displays
- Research and Development (UHV systems, Particle accelerators)
- Load locks and transfer chambers
Leybold TW701 Features and Advantages:
- Integrated frequency converter
- Operation in any orientation
- Highest pumping speed and throughput for Nitrogen and Argon
- High foreline tolerance allows the use of downsized fore-vacuum pumps
- Oil-free pump for generating clean high- and ultrahigh-vacuum conditions
- Space-saving
- Easy to integrate into complex vacuum systems
- High productivity
- Low operating costs
- Highly reliable operation
Leybold TW 701 Pumping Speed:
Leybold TW 701 Dimensions:
Click Here for Leybold TW 701 Brochure
A&J Vacuum Rrepair / Rebuild and Service Leybold TW701 800051V0023 Turbo Pumps Leybold Vacuum pumps, Oerlikon Leybold Turbo Pumping Stations along with all other Leybold Turbo Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Specifications
Fully Remanufactured Leybold TW 701 Turbo Pump 800051V0021 with Turbo Drive L Controller 800071V0002,Air Cooled, DN 160 ISO Inlet Flange
Leybold TW 701 Technical Data:
Click Here for Leybold TW 701 Brochure
A&J Vacuum Rrepair / Rebuild and Service Leybold TW701 800051V0023 Turbo Pumps Leybold Vacuum pumps, Oerlikon Leybold Turbo Pumping Stations along with all other Leybold Turbo Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Service & Repair
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
