The Edwards E2M1.5 pumps are two-stage, direct drive, sliding vane pumps. The pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.
The E2M 1.5 motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.
An Edwards Vacuum Pump E2M1.5 oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.
A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 200-230 VAC, A37122919, (A371-22-919)
Edwards E2M1.5 Technical Data:
Displacement (50Hz) | 20.5 m3h-1 / |
12.1 ft3min-1 | |
Displacement (60Hz) | 25.0 m3h-1 / |
14.7 ft3min-1 | |
Speed (Pneurop 6602) 50 Hz | 17.0 m3h-1 / |
10 ft3min-1 | |
Speed (Pneurop 6602) 60Hz | 20.4 m3h-1 / |
12.1 ft3min-1 | |
Ultimate vacuum (total pressure) | |
without gas purge | 1 x 10-3 mbar / |
7.4 x 10-4 Torr | |
with gas purge | 1.5 x 10-1 mbar / |
1.1 x 10-2 Torr | |
with Fomblin® | 1 x 10-2 mbar / |
7.5 x 10-3 Torr | |
Inlet connection | NW25 |
Outlet connection** | Nozzle 15 mm external Ø removable from 3/4 in BSP tapped hole |
Max permitted pressure at outlet | 0.5 bar gauge / |
7 psig | |
Max inlet pressure | 20 mbar / |
for water vapour | 15 Torr |
Max water vapour pumping rate | 0.3 kg h-1 |
Operating temp range | 13-40°C |
Nominal Rotation speed 50/60Hz | 1440/1720 rpm |
Power connector 1-ph* | IEC EN60320 C19 |
Motor power 50 Hz | 0.55 kW |
Motor power 60 Hz | 0.75 kW |
Weight | 39 kg / 86 lbs |
Noise @ 50Hz | 57 dB(A) |
Oil capacity - max | 1.05 litre |
Oil capacity - min | 0.75 litre |
Recommended oil (supplied) | Ultragrade 19 |
A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
The Edwards E2M1.5 pumps are two-stage, direct drive, sliding vane pumps. The pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.
The E2M 1.5 motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.
An Edwards Vacuum Pump E2M1.5 oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.
A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 200-230 VAC, A37122919, (A371-22-919)
Edwards E2M1.5 Technical Data:
Displacement (50Hz) | 20.5 m3h-1 / |
12.1 ft3min-1 | |
Displacement (60Hz) | 25.0 m3h-1 / |
14.7 ft3min-1 | |
Speed (Pneurop 6602) 50 Hz | 17.0 m3h-1 / |
10 ft3min-1 | |
Speed (Pneurop 6602) 60Hz | 20.4 m3h-1 / |
12.1 ft3min-1 | |
Ultimate vacuum (total pressure) | |
without gas purge | 1 x 10-3 mbar / |
7.4 x 10-4 Torr | |
with gas purge | 1.5 x 10-1 mbar / |
1.1 x 10-2 Torr | |
with Fomblin® | 1 x 10-2 mbar / |
7.5 x 10-3 Torr | |
Inlet connection | NW25 |
Outlet connection** | Nozzle 15 mm external Ø removable from 3/4 in BSP tapped hole |
Max permitted pressure at outlet | 0.5 bar gauge / |
7 psig | |
Max inlet pressure | 20 mbar / |
for water vapour | 15 Torr |
Max water vapour pumping rate | 0.3 kg h-1 |
Operating temp range | 13-40°C |
Nominal Rotation speed 50/60Hz | 1440/1720 rpm |
Power connector 1-ph* | IEC EN60320 C19 |
Motor power 50 Hz | 0.55 kW |
Motor power 60 Hz | 0.75 kW |
Weight | 39 kg / 86 lbs |
Noise @ 50Hz | 57 dB(A) |
Oil capacity - max | 1.05 litre |
Oil capacity - min | 0.75 litre |
Recommended oil (supplied) | Ultragrade 19 |
A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.