The Yamato DP-63C Vacuum Oven, Programmable, 7.62 Cubic Foot, 216 Liters 220V 15A 50/60Hz, is the Larger vacuum oven designed for various purposes, Vacuum pump can be stored in compartment below DP-63C. The new Yamato DP-63C has many advantages over discontinued DP Vacuum Ovens.
The DP63C stands out with the following features:
The Yamato DP-63C range from +5 C to +200 C (360 F), Vacuum range from 760 to 1 Torr. Vacuum and Vent valves are located on the back of the DP-63C with hose for Vacuum hose connections. That Yamato DP-63C has a footprint of 32.28 x 32 x 65 Inch. Yamato DP-63C voltage requirement 220 VAC at 50/60 Hz, 15 Amps, we also offer Yamato DP-43C unit with Smaller specifications than DP-63C. For full list of DP-63C and DP-63C Please reffer to specification Tap, or oprating manual.
Yamato ADP-31, Yamato ADP-300C, Yamato ADP-300C, Yamato ADP-310C, Yamato DP-43C, and Yamato DP-63C Vacuum Ovens are commonly used in laboratories as well as in manufacturing sites in wide range of Industry segments.
Typical Vacuum Oven Applications include:
Performance DP43C DP63C | ||
System | Vacuum drying by decompressed chamber direct heating | |
Operating temperature range | Room temp.+5 to 200°C | |
Operating pressure range | 101 to 0.1 kPa (760 to 1 Torr) at absolute pressure | |
Temp. control accuracy | ±1.0°C (at 200°C) | |
Max. temp. reaching time | Approx. 80 min. (no load, no vacuum) | Approx. 120 min. (no load, no vacuum) |
Components | ||
Interior material | Stainless steel SUS 304 | |
Exterior material | Cold rolled steel plate with baked-on melamine resin finish | |
Door | Single swing door | |
Heat insulating material | Rock wool | |
Heating method | Decompressed chamber direct heating | |
Heater | Mica heater, 2.25 kW | Mica heater, 3.15 kW |
Vacuum gauge | Bourdon tube type, 0 to -0.1 MPa (Gauge pressure) | |
Observation window | Tempered glass and polycarbonate resin plate | |
Controller | ||
Temp. control method | PID control by microprocessor | |
Temp. setting method | Digital setting with UP/DOWN key | |
Temp display method | Digital display by green LED | |
Timer | 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. | |
Min. division | 1 min. or 1 Hrs. | |
Operation function | Fixed temperature operation, Auto-start operation, Auto-stop operation, Program operation (16 segments) | |
Additional functions | Calendar timer (max. 24 Hrs.), Integration time (max. 49999 Hrs.), Time display | |
Heater circuit control | Triac zero-cross control | |
Temp. sensor | K-thermocouple (double sensor) | |
Safe Device | ||
Safety countermeasures | Self diagnosis functions (Sensor, Heater, Triac, Automatic overheating prevention), Independent overheating prevention, Key lock function, Electric leakage breaker | |
Standard | ||
Internal dimensions (W×D×Hmm) | 450×450×450 | 600×600×600 |
External dimensions (W×D×Hmm) | 670×669×1,500 | 820×819×1,650 |
Internal capacity | 91 L | 216 L |
Shelf rest step number | 4 steps | |
Shelf rest pitch | 105mm | 140mm |
Exhaust port / Purge port | NW25 flange / Rc 1/4 (18mm O.D.) | |
Power source 50/60Hz | 200V/220V, single phase, 12A/10.9A |
220V, single phase, 14.3A |
Weight | Approx. 190 kg | Approx. 290 kg |
Included Accessories | ||
Shelf | 2 punched stainless steel shelves | |
Optional Accessories | ||
Additional shelf plate / Vacuum pump switch / N2 gas inlet port / Temp. output terminal / Vacuum pump |
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
The Yamato DP-63C Vacuum Oven, Programmable, 7.62 Cubic Foot, 216 Liters 220V 15A 50/60Hz, is the Larger vacuum oven designed for various purposes, Vacuum pump can be stored in compartment below DP-63C. The new Yamato DP-63C has many advantages over discontinued DP Vacuum Ovens.
The DP63C stands out with the following features:
The Yamato DP-63C range from +5 C to +200 C (360 F), Vacuum range from 760 to 1 Torr. Vacuum and Vent valves are located on the back of the DP-63C with hose for Vacuum hose connections. That Yamato DP-63C has a footprint of 32.28 x 32 x 65 Inch. Yamato DP-63C voltage requirement 220 VAC at 50/60 Hz, 15 Amps, we also offer Yamato DP-43C unit with Smaller specifications than DP-63C. For full list of DP-63C and DP-63C Please reffer to specification Tap, or oprating manual.
Yamato ADP-31, Yamato ADP-300C, Yamato ADP-300C, Yamato ADP-310C, Yamato DP-43C, and Yamato DP-63C Vacuum Ovens are commonly used in laboratories as well as in manufacturing sites in wide range of Industry segments.
Typical Vacuum Oven Applications include:
Performance DP43C DP63C | ||
System | Vacuum drying by decompressed chamber direct heating | |
Operating temperature range | Room temp.+5 to 200°C | |
Operating pressure range | 101 to 0.1 kPa (760 to 1 Torr) at absolute pressure | |
Temp. control accuracy | ±1.0°C (at 200°C) | |
Max. temp. reaching time | Approx. 80 min. (no load, no vacuum) | Approx. 120 min. (no load, no vacuum) |
Components | ||
Interior material | Stainless steel SUS 304 | |
Exterior material | Cold rolled steel plate with baked-on melamine resin finish | |
Door | Single swing door | |
Heat insulating material | Rock wool | |
Heating method | Decompressed chamber direct heating | |
Heater | Mica heater, 2.25 kW | Mica heater, 3.15 kW |
Vacuum gauge | Bourdon tube type, 0 to -0.1 MPa (Gauge pressure) | |
Observation window | Tempered glass and polycarbonate resin plate | |
Controller | ||
Temp. control method | PID control by microprocessor | |
Temp. setting method | Digital setting with UP/DOWN key | |
Temp display method | Digital display by green LED | |
Timer | 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. | |
Min. division | 1 min. or 1 Hrs. | |
Operation function | Fixed temperature operation, Auto-start operation, Auto-stop operation, Program operation (16 segments) | |
Additional functions | Calendar timer (max. 24 Hrs.), Integration time (max. 49999 Hrs.), Time display | |
Heater circuit control | Triac zero-cross control | |
Temp. sensor | K-thermocouple (double sensor) | |
Safe Device | ||
Safety countermeasures | Self diagnosis functions (Sensor, Heater, Triac, Automatic overheating prevention), Independent overheating prevention, Key lock function, Electric leakage breaker | |
Standard | ||
Internal dimensions (W×D×Hmm) | 450×450×450 | 600×600×600 |
External dimensions (W×D×Hmm) | 670×669×1,500 | 820×819×1,650 |
Internal capacity | 91 L | 216 L |
Shelf rest step number | 4 steps | |
Shelf rest pitch | 105mm | 140mm |
Exhaust port / Purge port | NW25 flange / Rc 1/4 (18mm O.D.) | |
Power source 50/60Hz | 200V/220V, single phase, 12A/10.9A |
220V, single phase, 14.3A |
Weight | Approx. 190 kg | Approx. 290 kg |
Included Accessories | ||
Shelf | 2 punched stainless steel shelves | |
Optional Accessories | ||
Additional shelf plate / Vacuum pump switch / N2 gas inlet port / Temp. output terminal / Vacuum pump |
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.