phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Edwards E2M1.5, G1099-80023 Vacuum Pump, Hydrocarbon oil, 115 VAC, A37124902, HP1099-80023
Item#: PN21041 Mfr Part#: G1099-80023 / A37124902 Manufacturer: Edwards Vacuum
Condition: Remanufactured In Stock
Remanufactured Edwards E2M1.5, G1099-80023 Vacuum Pump, Hydrocarbon oil, 115VAC, A37124902, used with series 5973 Gas chromatography / 5973 Mass Spectrometry.

Features:
  • PN G1099-80023
  • also known as HP1099-80023
  • Fully Remanufactured
  • Like New

PRICE: $4,200.00
WEB SAVINGS: $1,805.00
YOU PAY: $2,395.00
Item#: PN21041 Mfr Part#: G1099-80023 / A37124902
Edwards E2M1.5, G1099-80023 Vacuum Pump, Hydrocarbon oil, 115 VAC, A37124902, HP1099-80023
Item#: PN21041 Mfr Part#: G1099-80023 / A37124902 Manufacturer: Edwards Vacuum

Refurbished Edwards E2M1.5, G1099-80023 Vacuum Pump, Hydrocarbon oil, 115VAC, A37124902, used with series 5973 Gas chromatography / 5973 Mass Spectrometry.

 

Edwards Vacuum E2M1.5 Overview:


The E2M1.5 / G109980023 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

This pump is alsko known as HP1099-80023, or HP109980023 set to 115 VAC.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 1.5 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 1.5 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Refurbished Edwards E2M1.5, G1099-80023 Vacuum Pump, Hydrocarbon oil, 115VAC, A37124902, used with series 5973 Gas chromatography / 5973 Mass Spectrometry.

 

Edwards Vacuum E2M1.5 Technical Data:


Displacement (swept volume)  
50 Hz 1.8 m3h-1 / 1 ft3min-1
60 Hz 2.2 m3h-1 / 1.3 ft3min-1
Speed (Pneurop 6602)  
50 Hz 1.6 m3h-1 / 0.8 ft3min-1
60 Hz 2.0 m3h-1 / 1.2 ft3min-1
Ultimate vacuum (total pressure)  
without gas ballast 1.5 x 10-3 mbar
with gas ballast 2.5 x 10-2 mbar / 1.9 x 10-2 Torr
Inlet connection NW10 flange
Outlet connection Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole
Maximum permitted pressure at outlet 0.5 bar gauge / 7 psig
Maximum inlet pressure for water vapour 15 mbar / 11 Torr
Maximum water vapour pumping rate 16 gh-1
Motor power 50/60 Hz (IP54) 0.16 kW
Nominal rotation speed 50/60Hz 2800/3400 rpm
Power connector IEC EN60320 C13
Operating temperature range 12 - 40 °C
Weight 10 kg / 22 lbs
Noise 54 dB (A) @ 50 Hz
Noise with acoustic enclosure 47 dB(A) @ 50Hz
Oil capacity - max 0.28 litre
min 0.2 litre
Recommended oil (supplied) Ultragrade 15

A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Name
Price
$165.00
Name
Price
Item#:
PN00838
Mfr Part#:
A13305000
$875.00
$1,850.00
$2,799.00
Item#:
PN16566
Mfr Part#:
A50507000
$57.83
$180.00
| Service and Repair
We can repair your:
  • Turbo Pumps
  • Rotary Vane Pumps
  • Dry Vacuum Pumps
  • Leak Detectors
  • Scroll Dry Pumps
  • Vacuum Boosters
  • Diaphragm Dry Pumps
You trusted worldwide leader of High Vacuum equipment!
Call us for your free repair estimate!
973-249-0854

A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.

We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.

We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.

Repair Steps

  1. Full incoming inspection and run up time check, vibration check, drive inspection.
  2. Full disassembly, decontamination and cleaning.
  3. Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
  4. Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
  5. Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.

Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.

Overview

Edwards E2M1.5, G1099-80023 Vacuum Pump, Hydrocarbon oil, 115 VAC, A37124902, HP1099-80023
Item#: PN21041 Mfr Part#: G1099-80023 / A37124902 Manufacturer: Edwards Vacuum

Refurbished Edwards E2M1.5, G1099-80023 Vacuum Pump, Hydrocarbon oil, 115VAC, A37124902, used with series 5973 Gas chromatography / 5973 Mass Spectrometry.

 

Edwards Vacuum E2M1.5 Overview:


The E2M1.5 / G109980023 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

This pump is alsko known as HP1099-80023, or HP109980023 set to 115 VAC.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 1.5 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 1.5 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Refurbished Edwards E2M1.5, G1099-80023 Vacuum Pump, Hydrocarbon oil, 115VAC, A37124902, used with series 5973 Gas chromatography / 5973 Mass Spectrometry.

 

Edwards Vacuum E2M1.5 Technical Data:


Displacement (swept volume)  
50 Hz 1.8 m3h-1 / 1 ft3min-1
60 Hz 2.2 m3h-1 / 1.3 ft3min-1
Speed (Pneurop 6602)  
50 Hz 1.6 m3h-1 / 0.8 ft3min-1
60 Hz 2.0 m3h-1 / 1.2 ft3min-1
Ultimate vacuum (total pressure)  
without gas ballast 1.5 x 10-3 mbar
with gas ballast 2.5 x 10-2 mbar / 1.9 x 10-2 Torr
Inlet connection NW10 flange
Outlet connection Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole
Maximum permitted pressure at outlet 0.5 bar gauge / 7 psig
Maximum inlet pressure for water vapour 15 mbar / 11 Torr
Maximum water vapour pumping rate 16 gh-1
Motor power 50/60 Hz (IP54) 0.16 kW
Nominal rotation speed 50/60Hz 2800/3400 rpm
Power connector IEC EN60320 C13
Operating temperature range 12 - 40 °C
Weight 10 kg / 22 lbs
Noise 54 dB (A) @ 50 Hz
Noise with acoustic enclosure 47 dB(A) @ 50Hz
Oil capacity - max 0.28 litre
min 0.2 litre
Recommended oil (supplied) Ultragrade 15

A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Name
Price
Item#:
PN00838
Mfr Part#:
A13305000
$875.00
$1,850.00
$2,799.00
Item#:
PN16566
Mfr Part#:
A50507000
$57.83
$180.00
We can repair your:
  • Turbo Pumps
  • Rotary Vane Pumps
  • Dry Vacuum Pumps
  • Leak Detectors
  • Scroll Dry Pumps
  • Vacuum Boosters
  • Diaphragm Dry Pumps
You trusted worldwide leader of High Vacuum equipment!
Call us for your free repair estimate!
973-249-0854

A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.

We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.

We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.

Repair Steps

  1. Full incoming inspection and run up time check, vibration check, drive inspection.
  2. Full disassembly, decontamination and cleaning.
  3. Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
  4. Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
  5. Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.

Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.


Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.