Hydrocarbon Oil
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
- Ulvac Ulvoil R4
- Volume: 55 Gallons
- For Ulvac Rotary Vane Pumps
- Ultimate Pressure: < 4 x 10-1 Pa
Ulvac R4 Ulvoil Rotary Vane Vacuum Pump Oil, 55 Gallons, 1014178
Ulvac Ulvoil R 4 is a petroleum based oil for general use created for both cost effectiveness and quality through hydrogenation improvement and high vacuum rectification processing.
R-4 is a cost effective product with high general applicability. When using a pump with an extremely high gas load, chemical changes may occur in the oil due to generated heat and chemical composition of the gasses being pumped. Therefore, it is important to select oil that suits the pump type and operating conditions.
- Features low viscosity and low temperature startup
- Recommended for small model vacuum pumps
A&J Vacuum Repair / Rebuild and Service ULVAC Vacuum Pumps and ULVAC Vacuum Boosters Pumps along with all other Vacuum Rotary Vane Pumps, Varian Dry Scroll Pump repair, ULVAC Leak Detector Repair and Service. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Ulvac R4 Ulvoil Rotary Vane Vacuum Pump Oil, 55 Gallons, 1014178
| Ultimate Pressure: | < 4 x 10-1 Pa |
| Color: | Light Yellow/Transparent |
| Kinematic Viscosity (40 Degrees Celsius): | 47 mm2/s |
| Kinematic Viscosity (100 Degrees Celsius): | 7 mm2/s |
| Viscosity Index: | 108 |
| Water Content: | 0.01> Percent |
| Total Acid Number: | 0.05> mg KOH/g |
| Density: | 0.87 g/cm3 |
A&J Vacuum Repair / Rebuild and Service ULVAC Vacuum Pumps and ULVAC Vacuum Boosters Pumps along with all other Vacuum Rotary Vane Pumps, Varian Dry Scroll Pump repair, ULVAC Leak Detector Repair and Service. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
|
Service and Repair - Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Overview
Ulvac R4 Ulvoil Rotary Vane Vacuum Pump Oil, 55 Gallons, 1014178
Ulvac Ulvoil R 4 is a petroleum based oil for general use created for both cost effectiveness and quality through hydrogenation improvement and high vacuum rectification processing.
R-4 is a cost effective product with high general applicability. When using a pump with an extremely high gas load, chemical changes may occur in the oil due to generated heat and chemical composition of the gasses being pumped. Therefore, it is important to select oil that suits the pump type and operating conditions.
- Features low viscosity and low temperature startup
- Recommended for small model vacuum pumps
A&J Vacuum Repair / Rebuild and Service ULVAC Vacuum Pumps and ULVAC Vacuum Boosters Pumps along with all other Vacuum Rotary Vane Pumps, Varian Dry Scroll Pump repair, ULVAC Leak Detector Repair and Service. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Specifications
Ulvac R4 Ulvoil Rotary Vane Vacuum Pump Oil, 55 Gallons, 1014178
| Ultimate Pressure: | < 4 x 10-1 Pa |
| Color: | Light Yellow/Transparent |
| Kinematic Viscosity (40 Degrees Celsius): | 47 mm2/s |
| Kinematic Viscosity (100 Degrees Celsius): | 7 mm2/s |
| Viscosity Index: | 108 |
| Water Content: | 0.01> Percent |
| Total Acid Number: | 0.05> mg KOH/g |
| Density: | 0.87 g/cm3 |
A&J Vacuum Repair / Rebuild and Service ULVAC Vacuum Pumps and ULVAC Vacuum Boosters Pumps along with all other Vacuum Rotary Vane Pumps, Varian Dry Scroll Pump repair, ULVAC Leak Detector Repair and Service. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Service & Repair
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
