ISP Series
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
- Displacement: 250 L/min (50Hz) / 300 L/min (60Hz)
- Ultimate Pressure: < 1.6 Pa
- Pumping speed 50Hz: 8.8 CFM
- Inlet Connection: NW 25
Anest Iwata ISP-250E Dry Scroll Vacuum Pump, Vertical Inlet, Three Phase Motor, ISP 250E, ISP-250E-TV
Anest Iwata ISP 250E Overview:
The Anest Iwata ISP-250 E Dry Scroll Pumps allow elimination of the nuisance of cumbersome lubricant maintenance or sealing water administration and produce a clean environment.
The ISP series vacuum pumps offer low power consumption from atmosphere to maximum pressure
The ISP-250 E Scroll Vacuum Pump should be used at ambient operation temperature in the range of 5ºC to 40ºC.
The ISP 250E pump is sutable for clean processes only.
The ISP-250 E Dry Pump is free from installation restrictions because of its air-cooled system. Water cooling is not required.
Do not use explosive, flammable, toxic or corrosive substances or substances which contains chemicals, solvents or particals.
The ISP-250 E Scroll Vacuum Pump is supplied with Air Flush Port, which pumps out the remaining moisture left over from pumping humid gases and maintains the ultimate pressure.
The Anest Iwata ISP Pumping System is suitable for clean purposes only. Do not use explosive, flammable, toxic or corrosive substances or substances which contain chemicals, solvents or particles.
Difference between ISP 250C and ISP 250E
- The ISP 250E have an additional pin crank, 3 total, provides less vibration and more reliability.
- The ISP 250E have hardened stainless steel crank shaft provides longer life.
- The ISP 250E have new seal design provides better leak tight tolerance.
- The ISP-250E have new longer life bearings provide stability
Anest Iwata ISP 250E Pumping Speed:
Anest Iwata ISP 250E Applications:
- Sputtering Equipment, Vacuum Depostition Equipment, Ion Plating Equipment
- Accelerator, Synchrotron Radiation
- Surface Modification, Electron Beam Process
- Device Handling System
- Vacuum Furnace, Heat Treatment Furnace
- Laboratory Use
- Vacuum Packaging Machine
- Gas Recovery Devices
- Vacuum Equipment
- Leak Detectors
Anest Iwata ISP 250E Dimensions:
A&J Vacuum Services, Inc is Anest Iwata authorized repair / rebuild and service center for all Scroll Dry Vacuum Pumps along with all other. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Anest Iwata ISP-250E Dry Scroll Vacuum Pump, Vertical Inlet, Three Phase Motor, ISP 250E, ISP-250E-TV
Anest Iwata ISP 250E Technical Data:
A&J Vacuum Services, Inc is Anest Iwata authorized repair / rebuild and service center for all Scroll Dry Vacuum Pumps along with all other. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
|
Service and Repair - Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Overview
Anest Iwata ISP-250E Dry Scroll Vacuum Pump, Vertical Inlet, Three Phase Motor, ISP 250E, ISP-250E-TV
Anest Iwata ISP 250E Overview:
The Anest Iwata ISP-250 E Dry Scroll Pumps allow elimination of the nuisance of cumbersome lubricant maintenance or sealing water administration and produce a clean environment.
The ISP series vacuum pumps offer low power consumption from atmosphere to maximum pressure
The ISP-250 E Scroll Vacuum Pump should be used at ambient operation temperature in the range of 5ºC to 40ºC.
The ISP 250E pump is sutable for clean processes only.
The ISP-250 E Dry Pump is free from installation restrictions because of its air-cooled system. Water cooling is not required.
Do not use explosive, flammable, toxic or corrosive substances or substances which contains chemicals, solvents or particals.
The ISP-250 E Scroll Vacuum Pump is supplied with Air Flush Port, which pumps out the remaining moisture left over from pumping humid gases and maintains the ultimate pressure.
The Anest Iwata ISP Pumping System is suitable for clean purposes only. Do not use explosive, flammable, toxic or corrosive substances or substances which contain chemicals, solvents or particles.
Difference between ISP 250C and ISP 250E
- The ISP 250E have an additional pin crank, 3 total, provides less vibration and more reliability.
- The ISP 250E have hardened stainless steel crank shaft provides longer life.
- The ISP 250E have new seal design provides better leak tight tolerance.
- The ISP-250E have new longer life bearings provide stability
Anest Iwata ISP 250E Pumping Speed:
Anest Iwata ISP 250E Applications:
- Sputtering Equipment, Vacuum Depostition Equipment, Ion Plating Equipment
- Accelerator, Synchrotron Radiation
- Surface Modification, Electron Beam Process
- Device Handling System
- Vacuum Furnace, Heat Treatment Furnace
- Laboratory Use
- Vacuum Packaging Machine
- Gas Recovery Devices
- Vacuum Equipment
- Leak Detectors
Anest Iwata ISP 250E Dimensions:
A&J Vacuum Services, Inc is Anest Iwata authorized repair / rebuild and service center for all Scroll Dry Vacuum Pumps along with all other. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Specifications
Anest Iwata ISP-250E Dry Scroll Vacuum Pump, Vertical Inlet, Three Phase Motor, ISP 250E, ISP-250E-TV
Anest Iwata ISP 250E Technical Data:
A&J Vacuum Services, Inc is Anest Iwata authorized repair / rebuild and service center for all Scroll Dry Vacuum Pumps along with all other. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Spare Parts
Accessories
Service & Repair
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
