Vacuum Epoxy Seal Overview:
Loctite EA 1C Epoxy adhesive is a resin designed to seal leaks on any high vacuum equipment.
LOCTITE® EA 1C™ is a general purpose adhesive and sealant that bonds, seals, and repairs a wide variety of materials including metals, most plastics, and wood.
Vacuum Epoxy Seal package Includes:
GENERAL INFORMATION
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
Specific Benefits;
Applying Vacuum Epoxy Seal 1373425.
1. Bonding surfaces should be clean, dry, and free of contamination.
2. Once the adhesive is applied, the bonded parts should be held in contact until the part has developed handling strength (3 to 4 hours @ 25 °C) note: this can vary with different bond configurations. It is not necessary to clamp the parts unless movement during cure is likely.
Cure
1. Complete cure is obtained after 72 hours @ 25 °C. LOCTITE® EA 1C™ can also be fully cured with heat such as;
2 hours at a maximum temperature of 60 °C. 2. After 24 hours, approximately 90% of full cure properties are attained at room temperature.
3. This product can also be cured for 1 hour @ 82°C or 20 to 30 minutes @ 121°C. 4. Heat cures can be modified to achieve a desired degree of cure from handling strength to full cure.
Clean up
1. It is important to clean up excess adhesive from the work area and application equipment before it hardens.
2. Denatured alcohol and many common industrial solvents are suitable for removing uncured adhesive.
Overview:
Loctite EA 1C Epoxy adhesive is a resin designed to seal leaks on any high vacuum equipment.
LOCTITE® EA 1C™ is a general purpose adhesive and sealant that bonds, seals, and repairs a wide variety of materials including metals, most plastics, and wood.
Vacuum Epoxy Seal package Includes:
GENERAL INFORMATION
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Vacuum Epoxy Seal Overview:
Loctite EA 1C Epoxy adhesive is a resin designed to seal leaks on any high vacuum equipment.
LOCTITE® EA 1C™ is a general purpose adhesive and sealant that bonds, seals, and repairs a wide variety of materials including metals, most plastics, and wood.
Vacuum Epoxy Seal package Includes:
GENERAL INFORMATION
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
Specific Benefits;
Applying Vacuum Epoxy Seal 1373425.
1. Bonding surfaces should be clean, dry, and free of contamination.
2. Once the adhesive is applied, the bonded parts should be held in contact until the part has developed handling strength (3 to 4 hours @ 25 °C) note: this can vary with different bond configurations. It is not necessary to clamp the parts unless movement during cure is likely.
Cure
1. Complete cure is obtained after 72 hours @ 25 °C. LOCTITE® EA 1C™ can also be fully cured with heat such as;
2 hours at a maximum temperature of 60 °C. 2. After 24 hours, approximately 90% of full cure properties are attained at room temperature.
3. This product can also be cured for 1 hour @ 82°C or 20 to 30 minutes @ 121°C. 4. Heat cures can be modified to achieve a desired degree of cure from handling strength to full cure.
Clean up
1. It is important to clean up excess adhesive from the work area and application equipment before it hardens.
2. Denatured alcohol and many common industrial solvents are suitable for removing uncured adhesive.
Overview:
Loctite EA 1C Epoxy adhesive is a resin designed to seal leaks on any high vacuum equipment.
LOCTITE® EA 1C™ is a general purpose adhesive and sealant that bonds, seals, and repairs a wide variety of materials including metals, most plastics, and wood.
Vacuum Epoxy Seal package Includes:
GENERAL INFORMATION
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.