phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
Main Categories

- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: Refurbished / Demo Mist Filters
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 2 products
Item#: PN18210 Mfr Part#: A46211000 Manufacturer: Edwards Vacuum
PRICE: $2,410.00
WEB SAVINGS: $915.00
YOU PAY: $1,495.00

Edwards MF100AE (MF 100 AE) Oil Mist Filter, A46211000

 

Edwards MF100AE Overview:


The MF100 and MF100AE filters have fine-pore filter elements and a stainless steel wire-mesh filter element inside the steel body. The MF100 and MF100AE have two fine-pore filter elements.

The MF100AE is designed for use with corrosive and toxic gases and vapours. It is leak tested to 1 x 10-4 mbar.ls-1 (1 x 10-2 Pa.ls-1) and the filter elements, sight-glasses and seals are resistant to chemical attack.

The exhaust gases from the pump enter the inlet of the filter and pass down through the filter elements which separate and trap the oil mist.

The exhaust gases then pass through the stainless steel wire mesh element which traps any large droplets of oil carried by the filtered gas. The oil-free exhaust gases are then discharged through the outlet. The trapped oil drains into the base of the body of the mist filter.

The mist filter has a sight-glass so that you can see the level of oil trapped in the mist filter. The sight-glass indicates the maximum level at which the filter operates efficiently.

The sight-glass in the MF100 mist filter is glued in position inside the body of the mist filter. The sightglass in the MF100AE mist filter is secured in position by a bezel and 'O' rings. If necessary, you can replace the sight-glass in the MF100AE.

The body has a drain-valve so that you can drain the trapped oil from the filter.

The spring-loaded pressure-relief valve prevents a dangerous pressure build-up inside the pump and the body if the filter becomes blocked.

  • The MF100 and MF100AE come supplied with two NW25 'C' clamps, NW25 elbow, two NW25 centering rings and 'O' rings, bolts, washers, mounting brackets and studs

Designed to be used with the following Edwards Rotary Vane Vacuum Pumps:

  • E1M40
  • E1M80
  • E2M40
  • E2M80

 


A&J Vacuum Services offers full repair/service of Edwards Dry Scroll Pumps, along with all other brands offered on our website. AJVS also services Edwards pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.


Condition: Remanufactured In Stock
Item#: PN18209 Mfr Part#: A46203000 Manufacturer: Edwards Vacuum
Price upon request

Edwards MF100 (MF 100) Oil Mist Filter, A46203000, MF-100

 

Edwards MF100 Overview:


The MF100 and MF100AE filters have fine-pore filter elements and a stainless steel wire-mesh filter element inside the steel body. The MF100 and MF100AE have two fine-pore filter elements.

The MF100AE is designed for use with corrosive and toxic gases and vapours. It is leak tested to 1 x 10-4 mbar.ls-1 (1 x 10-2 Pa.ls-1) and the filter elements, sight-glasses and seals are resistant to chemical attack.

The exhaust gases from the pump enter the inlet of the filter and pass down through the filter elements which separate and trap the oil mist.

The exhaust gases then pass through the stainless steel wire mesh element which traps any large droplets of oil carried by the filtered gas. The oil-free exhaust gases are then discharged through the outlet. The trapped oil drains into the base of the body of the mist filter.

The mist filter has a sight-glass so that you can see the level of oil trapped in the mist filter. The sight-glass indicates the maximum level at which the filter operates efficiently.

The sight-glass in the MF100 mist filter is glued in position inside the body of the mist filter. The sightglass in the MF100AE mist filter is secured in position by a bezel and 'O' rings. If necessary, you can replace the sight-glass in the MF100AE.

The body has a drain-valve so that you can drain the trapped oil from the filter.

The spring-loaded pressure-relief valve prevents a dangerous pressure build-up inside the pump and the body if the filter becomes blocked.

  • The MF100 and MF100AE come supplied with two NW25 'C' clamps, NW25 elbow, two NW25 centering rings and 'O' rings, bolts, washers, mounting brackets and studs

Designed to be used with the following Edwards Rotary Vane Vacuum Pumps:

  • E1M40
  • E1M80
  • E2M40
  • E2M80

 


A&J Vacuum Services offers full repair/service of Edwards Dry Scroll Pumps, along with all other brands offered on our website. AJVS also services Edwards pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.


Condition: Remanufactured Call us for Availability
Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.