Alcatel Drytel 1025 Jumper Plug for Operation in Local Mode, 25 Pin D-Sub, PN57933

Alcatel Drytel 1025 Jumper Plug Features:

• Ready to use
• Designed for Drytel 1025 stations equipped with a remote control connector to operate as a standalone unit in local mode
• Set to 115 VAC, can be changed to high 220 VAC

Drytel 1025 / Overview:

The Adixen Drytel 1025 series of products are dry pumping systems that include an Alcatel MDP 5011 or also known as Adixen MDP5011 Turbo molecular drag pump (MDP) or a hybrid turbo pump (AMH) and an oil-free forepump. Designed to be used on a bench top or easily integrated into a system, these units provide a dry, clean vacuum from atmosphere to 10-6 mbar (Torr).

Does not include venting valve or remote control controller.

A&J Vacuum Services, Inc. AJVS Rrepair / Rebuild and Service Alcatel Drytel 1025 Turbo Pumping Stations, Drytel 30, Drytel 31, Drytel 100, Adixen Vacuum pumps, Alcatel Turbo Pumping Stations along with all other Adixen Turbo Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.

Alcatel Adixen Splinter Shield (Inlet Screen) is designed to be used with the following turbo vacuum pumps:

• Alcatel Adixen ATP 900
• Alcatel Adixen 5900

Alcatel Syringe for Turbo Pump Bearings ABG 400, Old PN 056990 and New PN 200028, ABG-400, also known as Adixen beairngs lubricating syringe

This PFPE ABG400 Syringe is used for Standard Turbo Vacuum Pump bearing maintenance, Ceramic bearings lubrication, to maintain proper Turbo Pump operation. Old P/N 056990 and New P/N 200028.

ABG 400 Syringe is designed for Alcatel Adixen Turbo Pump models:

• Alcatel 5150
• Alcatel 5150 CP
• Alcatel 5400
• Alcatel 5400 CP
• Alcatel 5401
• Alcatel 5401 CP
• Alcatel 5402
• Alcatel 5402 CP
• Alcatel 5900

A&J Vacuum also repair / rebuild and service all Alcatel Adixen Turbo Pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page.

This cable is to be used with the following Turbomolecular Pumps:

• Alcatel Adixen ATP 80
• Alcatel Adixen ATP 100

Alcatel Adixen Splinter Shield (Inlet Screen) is designed to be used with the following turbo vacuum pumps:

• Alcatel Adixen ATP 400
• Alcatel Adixen 5400

Alcatel Adixen Splinter Shield (Inlet Screen) is designed to be used with the following turbo vacuum pumps:

• Alcatel Adixen ATP 400
• Alcatel Adixen 5400

• Suitable for all Alcatel ATP150, ATP400 and ATP900 Pump
• Water cooling is recomended if the pump is heated or operated at high gas loads

A&J Vacuum also repair / rebuild and service Alcatel Adixen ATP-150, ATP-400, ATP-900 Turbo Pumps  along with all other Pfeiffer Adixen pumps and Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Alcatel Lubrication Syringe for Turbo Pump Bearings ABG 400, Old PN 101924 and New PN 200029, ABG-400, PFPE also known as Adixen Syringe

This PFPE ABG400 Syringe is used for Standard Turbo Vacuum Pump bearing maintenance, Ceramic bearings lubrication, to maintain proper Turbo Pump operation. Old P/N 101924 and New P/N 200029.

ABG 400 Syringe is designed for Alcatel Adixen Turbo Pump models:

• Alcatel Adixen ATP150
• Alcatel Adixen ATP400
• Alcatel Adixen ATP900
• Alcatel Adixen ATP900 C

A&J Vacuum also repair / rebuild and service all Alcatel Adixen Turbo Pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page.

This cable is to be used with the following Turbomolecular Pumps:

• Alcatel Adixen MDP 5011