Pfeiffer Vacuum Splitflow 310 3P MS SplitFlow Turbo Pump, with TC 110, PM P04 031 C / PMP04031 / PMC01790

Pfeiffer Splitflow 310 / PM P04 031 Overview:

SplitFlow 310 Turbo Pump has been designed and used in Lab instruments.  Has a wear free permanent magnetic bearing at the high vacuum side and a oil lubricated ceramic bearing at the backing side.

Pfeiffer Vacuum Splitflow Turbo pump is designed for laboratory systems and a wide range of applications in research industry, and mass spectrometry.

It has been thoroughly examined and is ready for broad range of applications within the research and industrial industries.

The Pfeiffer SplitFlow 310 / PMP04031C Turbo Pump is the source pump on the mass spectrometer systems.

A turbopump is a gas turbine that is made up of two independent components ; a rotodynamic pump and a driving turbine. They can be mounted on the same shaft or customarily geared together. The design of a turbopump is to produce a high pressure fluid for feeding a combustion chamber or other use. Visit the turbo pump wiki page for more information.

A turbomolecular pump is a form of vacuum pump similar to a turbopump which is used to obtain and hold a high vacuum. These pumps work on the principle that gas particles can be given momentum in a wanted direction by reiterated collision with a traveling solid surface. In a turbomolecular pump, a quickly spinning turbine rotor 'strikes' gas particles from the intake of the pump towards the exhaust in order to make or hold a vacuum. Visit the turbomolecular pump wiki page for more information.

A&J Vacuum Repair / Rebuild and Service all Pfeiffer Vacuum Splitflow 310 PMP040 / PM P0 031 Turbo Pumps  along with all other  Pfeiffer Turbo Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Fully Remanufactured Pfeiffer Splitflow 50 Split Flow Inficon Turbo Pump PMP04703A, with TC 110 PMC01790, PM P04 703

Pfeiffer Splitflow 50 / PM P04 703A Overview:

Pfeiffer Splitflow 50 / PMP04703 Turbo Pump has been design to operate as part of Inficon Instrument.

This Splitflow pump has a free of wear permanent magnetic bearing at high vacuum side and oil lubricated ceramic bearing at the backing side.

Pfeiffer Vacuum Splitflow Turbo pump is designed for a wide range of applications in research industry, and mass spectrometry.

It has been thoroughly examined and is ready for broad range of applications within the research and industrial industries. The Pfeiffer SplitFlow 50 / PM P04703A Turbo Pump comes with an entire 12-Month Warranty.

Pfeiffer Splitflow 50 Technical Data:

• Fully rebuild and ready to be installed.
• Pumping speed: for N2 70 l/s.
• DN 63 ISO-K flange
• Ultimate pressure with rotary vane pump < 1x•10-9 mbar,

There are no returns, refunds or exchanges on this product.

A&J Vacuum repair / rebuild and service all Pfeiffer Splitflow 50 Turbo Pumps  PMP04703A along with all other  Pfeiffer  Vacuum Pumps and all other Pfeiffer Leak Detector  Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Pfeiffer Splitflow 310 Split Flow Turbo Pump PM P04 299, with TC 400, PM C01 800, Thermo Fisher P/N 1310410TF

Pfeiffer Splitflow 310 / PM P04 299 Overview:

SplitFlow 310 Turbo Pump has been designed and used in Thermo Fisher instruments.  Has a wear free permanent magnetic bearing at the high vacuum side and a oil lubricated ceramic bearing at the backing side.

Pfeiffer Vacuum Splitflow Turbo pump is designed for Thermo Fisher Q Exactive and a wide range of applications in research industry, and mass spectrometry. Thermo Fisher P/N 1310410TF

It has been thoroughly examined and is ready for broad range of applications within the research and industrial industries.

The Pfeiffer SplitFlow 310 / PMP04299 Turbo Pump is the source pump on the  Thermo Fisher Q Exactive system.

A turbopump is a gas turbine that is made up of two independent components ; a rotodynamic pump and a driving turbine. They can be mounted on the same shaft or customarily geared together. The design of a turbopump is to produce a high pressure fluid for feeding a combustion chamber or other use. Visit the turbo pump wiki page for more information.

A turbomolecular pump is a form of vacuum pump similar to a turbopump which is used to obtain and hold a high vacuum. These pumps work on the principle that gas particles can be given momentum in a wanted direction by reiterated collision with a traveling solid surface. In a turbomolecular pump, a quickly spinning turbine rotor 'strikes' gas particles from the intake of the pump towards the exhaust in order to make or hold a vacuum. Visit the turbomolecular pump wiki page for more information.

There are no returns, refunds or exchanges on this product.

A&J Vacuum Repair / Rebuild and Service all Pfeiffer Vacuum Splitflow 310 PMP04299 / PM P04 299 Turbo Pumps  along with all other  Pfeiffer Turbo Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Fully Remanufactured Pfeiffer Splitflow 80 Split Flow Turbo Pump PMP04012A, with TC 110 PMC01790, PM P04 012, Inficon P/N 032-0079

Pfeiffer Splitflow 80 Overview:

Pump has been design to operate as part of Inficon Transpector® CPM 2.5 Compact Process Monitor. Pump P/N 923-723-G1 CDG 025D.

This Splitflow pump has a free of wear permanent magnetic bearing at high vacuum side and oil lubricated ceramic bearing at the backing side.

Inficon System Information CMP11202001422201T The Splitflow 80 pump / PMP04012 is a well know pump and proven within Instruments industry.

Pfeiffer Vacuum Splitflow Turbo pump is designed for a wide range of applications in research industry, and mass spectrometry.

It has been thoroughly examined and is ready for broad range of applications within the research and industrial industries. The Pfeiffer SplitFlow 80 Turbo Pump comes with an entire 12-Month Warranty.

Pfeiffer Splitflow 80 Technical Data:

• Fully rebuild and ready to be installed.
• Pumping speed: for N2 70 l/s.
• DN 35 CF-F flange
• Ultimate pressure with rotary vane pump < 1x•10-9 mbar,

There are no returns, refunds or exchanges on this product.

A&J Vacuum repair / rebuild and service all Pfeiffer Splitflow 80 Turbo Pumps  PMP04012A along with all other  Pfeiffer  Vacuum Pumps and all other Pfeiffer Leak Detector  Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Pfeiffer Splitflow 310 Split Flow Turbo Pump PMP04550, with TC 400 Turbo Controller, PMC01805, PM P04 550, Waters Turbo Pump

Pfeiffer Vacuum Splitflow 310 / PM P04 550 Overview:

SplitFlow 310 Turbo Pump has been designed and used in Waters instruments.  Has a wear free permanent magnetic bearing at the high vacuum side and a oil lubricated ceramic bearing at the backing side.

Pfeiffer Vacuum Splitflow 310 / PM P04 550 Turbo pump is designed for Bruker and a wide range of applications in research industry, and mass spectrometry.

It has been thoroughly examined and is ready for broad range of applications within the research and industrial industries.

The Pfeiffer SplitFlow 310 / PMP04550 Turbo Pump is the source pump.

The Pfeiffer SplitFlow 310 / PMP04550 Turbo Pump requires backing pump with pumping speeds at least 15 m3/h

A turbopump is a gas turbine that is made up of two independent components ; a rotodynamic pump and a driving turbine. They can be mounted on the same shaft or customarily geared together. The design of a turbopump is to produce a high pressure fluid for feeding a combustion chamber or other use. Visit the turbo pump wiki page for more information.

A turbomolecular pump is a form of vacuum pump similar to a turbopump which is used to obtain and hold a high vacuum. These pumps work on the principle that gas particles can be given momentum in a wanted direction by reiterated collision with a traveling solid surface. In a turbomolecular pump, a quickly spinning turbine rotor 'strikes' gas particles from the intake of the pump towards the exhaust in order to make or hold a vacuum. Visit the turbomolecular pump wiki page for more information.

A&J Vacuum Repair / Rebuild and Service all Pfeiffer Vacuum Splitflow 310 PMP04550 / PM P04 550 Turbo Pumps  along with all other  Pfeiffer Turbo Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Fully Remanufactured Pfeiffer Splitflow 80 Split Flow Turbo Pump PMP04316A, with TC 110 PMC01790A, PM P04 316

Please note: vent valve and conncting cable not included.

Pfeiffer Splitflow 80 Overview:

This Splitflow pump has a free of wear permanent magnetic bearing at high vacuum side and oil lubricated ceramic bearing at the backing side.

Pfeiffer Vacuum Splitflow Turbo pump is designed for a wide range of applications in research industry, and mass spectrometry.

It has been thoroughly examined and is ready for broad range of applications within the research and industrial industries. The Pfeiffer SplitFlow 80 Turbo Pump comes with an entire 12-Month Warranty.

The Splitflow 80 pump / PMP04316 is a well know pump and proven within Instruments industry.

Pfeiffer Splitflow 80 Technical Data:

• Fully rebuild and ready to be installed.
• Pumping speed: for N2 70 l/s.
• Dual Inlet Flange
• Ultimate pressure with rotary vane pump < 1x•10-9 mbar,
• Oil Lubricant PM143740-T

There are no returns, refunds or exchanges on this product.

A&J Vacuum repair / rebuild and service all Pfeiffer Splitflow 80 Turbo Pumps  PMP04012A along with all other  Pfeiffer  Vacuum Pumps and all other Pfeiffer Leak Detector  Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Pfeiffer Splitflow 310 Split Flow Turbo Pump, with TC 110, PM P05 570 / PMP05570 / PMC01790, New Open Box !

Pfeiffer Splitflow 310 / PM P05 570 Overview:

SplitFlow 310 Turbo Pump has been designed and used in Lab instruments.  Has a wear free permanent magnetic bearing at the high vacuum side and a oil lubricated ceramic bearing at the backing side.

Pfeiffer Vacuum Splitflow Turbo pump is designed for laboratory systems and a wide range of applications in research industry, and mass spectrometry.

It has been thoroughly examined and is ready for broad range of applications within the research and industrial industries.

The Pfeiffer SplitFlow 310 / PMP05570 Turbo Pump is the source pump on the mass spectrometer systems.

A turbopump is a gas turbine that is made up of two independent components ; a rotodynamic pump and a driving turbine. They can be mounted on the same shaft or customarily geared together. The design of a turbopump is to produce a high pressure fluid for feeding a combustion chamber or other use. Visit the turbo pump wiki page for more information.

A turbomolecular pump is a form of vacuum pump similar to a turbopump which is used to obtain and hold a high vacuum. These pumps work on the principle that gas particles can be given momentum in a wanted direction by reiterated collision with a traveling solid surface. In a turbomolecular pump, a quickly spinning turbine rotor 'strikes' gas particles from the intake of the pump towards the exhaust in order to make or hold a vacuum. Visit the turbomolecular pump wiki page for more information.

A&J Vacuum Repair / Rebuild and Service all Pfeiffer Vacuum Splitflow 310 PMP05570 / PM P05 570 Turbo Pumps  along with all other  Pfeiffer Turbo Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854