Sales and Service
855 882 2886
0 Items
$0.00
Find us on:
Main Categories

- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: V and TV Series
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 7 products
Item#: PN14003 Mfr Part#: 9699078 Manufacturer: Agilent Technologies / Varian
PRICE: $7,125.00
WEB SAVINGS: $1,135.00
YOU PAY: $5,990.00

Varian TV550 ICE Turbo Pump, DN 100 ISO, 969-9078, TV-550 ICE Pump


Condition: Remanufactured In Stock
Item#: PN17586 Mfr Part#: 9698923 Manufacturer: Agilent Technologies / Varian
PRICE: $15,685.00
WEB SAVINGS: $7,690.00
YOU PAY: $7,995.00

Agilent Technologies / Varian TV551 Navigator Turbo Vacuum Pump, 8" CFF, 969-8923

 

Agilent/Varian TV551 Overview:


Fully Rebuild Varian TV 551 Navigator Turbomolecular Pump has CFF 8" Inlet Flange.

Turbo-V551 consists of a high frequency motor driving a turbine fitted with 8 bladed stages and 4 Macrotorr stages. The turbine rotates in a counterclockwise direction when viewed from the high vacuum flange end.

The Agilent TV 551 9698923 turbine is made of high-strength aluminium alloy, machined from a single block. The Macrotorr stages are in the form of four discs. The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump. The static blades of the stator are made of stainless steel. These are supported and accurately positioned by spacer rings. The Macrotorr V551 stators are in the form of selfpositioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are made of aluminium alloy.

During normal operation Varian V-551 969-8923 the motor is fed with a voltage of 54 Vac three-phase at 715 Hz. To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio. The pump can be water cooled or air cooled: in the first case the customer can use the dedicated channels on the pump body, in the second case an external optional fan is available. A thermistor sensor is mounted near the upper bearing to prevent the pump from overheating.


The Agilent Varian TV 551 Navigator pump is balanced after assembly with a residual vibration amplitude less than 0.01. The pump can operate in any position and can be supported on the high vacuum flange. The connection of the forevacuum on the side of the pump is a KF 25 NW flange.


Agilent V 551 Turbo Pump is very popular among many Analytical Instrument manufacturers. Varian Navigator pump is being used in many SEM Scanning Electron Microscopes, Mass Spectrometers along with Ion-Beam Instruments and Systems. Agilent Varian Turbo-V 551 Navigator turbomolecular pump is very cost efective for many applications within semiconductor applications and manufacturing.

 

Agilent/Varian TV551 Characteristic:


Agilent Varian TV551, 9698923, Characteristic

 

Agilent/Varian TV551 Dimensions:


Agilent Varian TV551, 9698923, Dimensions


Click Here for Agilent/Varian TV 551 Manual


A&J Vacuum also repair / rebuild and service Varian V551 9698923 Turbo pumps along with all other Agilent Turbo pumps and Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured In Stock
Item#: PN00185 Mfr Part#: 9699049 Manufacturer: Agilent Technologies / Varian
PRICE: $7,950.00
WEB SAVINGS: $1,250.00
YOU PAY: $6,700.00

Fully Refurbished Varian V550 Turbo Pump, DN 160-ISO Flange, 969-9049, Agilent TV550 9699049

 

Varian V550 Overview:


The Turbo-V550 pump consists of a high frequency motor driving a turbine fitted with 8 bladed stages and 4 Macrotorr stages. The turbine rotates in an anticlockwise direction when viewed from the high vacuum flange end. 

The turbine is made of high-strength, light aluminium alloy, and is machined from a single block of aluminium. The turbine blades have six different angles, from 40° to 16°, while the Macrotorr stages are in form of discs

The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump.

The static blades of the stator are made of stainless steel. These are supported and accurately positioned by spacer rings.

The Macrotorr stators are in the form of selfpositioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are made of aluminium alloy.

During normal operation, the motor is fed with a voltage of 56 Vac three-phase at 700 Hz. To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio.

The external body of the pump is shaped so that the pump can function with natural convection air cooling. Kits are available for water cooling or forced air cooling to cool the pump in the cases where it is used under heavy load or when natural convection is insufficient for cooling purposes.

 

Varian V550 Compression Ratio:


Varian V550 Compression Ratio, 9699049, 969-9049

 

Varian V550 Dimensions:


Varian V550 Dimensions, 9699049, 969-9049


Click Here for Varian V550 Manual


A&J Vacuum also repair / rebuild and service Varian V550 / 9699049 Turbo Pumps V-550 and Turbo Pump Controllers  along with all other Varian and Agilent Technology Vacuum Rotary Vane Pumps, Varian Dry Scroll Pump repair, Varian Leak Detector Repair and all other Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN00186 Mfr Part#: 9698922 Manufacturer: Agilent Technologies / Varian
PRICE: $9,800.00
WEB SAVINGS: $2,150.00
YOU PAY: $7,650.00

Agilent  Varian TV551 Navigator Turbo Pump, ISO 160, V551 NAV pump 969-8922, 9698922

 

Agilent/Varian TV551 Overview:


Fully Rebuild Varian TV 551 Navigator Turbomolecular Pump has DN 160 ISO Inlet Flange.

Turbo-V551 consists of a high frequency motor driving a turbine fitted with 8 bladed stages and 4 Macrotorr stages. The turbine rotates in a counterclockwise direction when viewed from the high vacuum flange end.

The Agilent TV 551 9698922 turbine is made of high-strength aluminium alloy, machined from a single block. The Macrotorr stages are in the form of four discs. The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump. The static blades of the stator are made of stainless steel. These are supported and accurately positioned by spacer rings. The Macrotorr V551 stators are in the form of selfpositioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are made of aluminium alloy.

During normal operation Varian V-551 969-8922 the motor is fed with a voltage of 54 Vac three-phase at 715 Hz. To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio. The pump can be water cooled or air cooled: in the first case the customer can use the dedicated channels on the pump body, in the second case an external optional fan is available. A thermistor sensor is mounted near the upper bearing to prevent the pump from overheating.


The Agilent Varian TV 551 Navigator pump is balanced after assembly with a residual vibration amplitude less than 0.01. The pump can operate in any position and can be supported on the high vacuum flange. The connection of the forevacuum on the side of the pump is a KF 25 NW flange.


Agilent V 551 Turbo Pump is very popular among many Analytical Instrument manufacturers. Varian Navigator pump is being used in many SEM Scanning Electron Microscopes, Mass Spectrometers along with Ion-Beam Instruments and Systems. Agilent Varian Turbo-V 551 Navigator turbomolecular pump is very cost efective for many applications within semiconductor applications and manufacturing.

 

Agilent/Varian TV551 Characteristic:


Agilent Varian TV551, 9698922, Characteristic

 

Agilent/Varian TV551 Dimensions:


Agilent Varian TV551, 9698922, Dimensions


Click Here for Agilent/Varian TV 551 Manual


A&J Vacuum also repair / rebuild and service Varian V551 9698922 Turbo pumps along with all other Agilent Turbo pumps and Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN00239 Mfr Part#: 9698944 Manufacturer: Agilent Technologies / Varian
PRICE: $10,800.00
WEB SAVINGS: $3,150.00
YOU PAY: $7,650.00

Agilent Technologies / Varian TV551 Navigator Turbo Vacuum Pump, ISO 160 - F Bolted, 969-8944

 

Agilent/Varian TV551 Overview:


Fully Rebuild Varian TV 551 Navigator Turbomolecular Pump has DN 160 ISO Inlet Flange.

Turbo-V551 consists of a high frequency motor driving a turbine fitted with 8 bladed stages and 4 Macrotorr stages. The turbine rotates in a counterclockwise direction when viewed from the high vacuum flange end.

The Agilent TV 551 9698944 turbine is made of high-strength aluminium alloy, machined from a single block. The Macrotorr stages are in the form of four discs. The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump. The static blades of the stator are made of stainless steel. These are supported and accurately positioned by spacer rings. The Macrotorr V551 stators are in the form of selfpositioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are made of aluminium alloy.

During normal operation Varian V-551 969-8944 the motor is fed with a voltage of 54 Vac three-phase at 715 Hz. To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio. The pump can be water cooled or air cooled: in the first case the customer can use the dedicated channels on the pump body, in the second case an external optional fan is available. A thermistor sensor is mounted near the upper bearing to prevent the pump from overheating.


The Agilent Varian TV 551 Navigator pump is balanced after assembly with a residual vibration amplitude less than 0.01. The pump can operate in any position and can be supported on the high vacuum flange. The connection of the forevacuum on the side of the pump is a KF 25 NW flange.


Agilent V 551 Turbo Pump is very popular among many Analytical Instrument manufacturers. Varian Navigator pump is being used in many SEM Scanning Electron Microscopes, Mass Spectrometers along with Ion-Beam Instruments and Systems. Agilent Varian Turbo-V 551 Navigator turbomolecular pump is very cost efective for many applications within semiconductor applications and manufacturing.

 

Agilent/Varian TV551 Characteristic:


Agilent Varian TV551, 9698944, Characteristic

 

Agilent/Varian TV551 Dimensions:


Agilent Varian TV551, 9698944, Dimensions


Click Here for Agilent/Varian TV 551 Manual


A&J Vacuum also repair / rebuild and service Varian V551 9698922 Turbo pumps along with all other Agilent Turbo pumps and Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN15769 Mfr Part#: 9699050 Manufacturer: Agilent Technologies / Varian
PRICE: $8,500.00
WEB SAVINGS: $1,001.00
YOU PAY: $7,499.00

Fully Refurbished Agilent Technologies / Varian TV550 Turbo Vacuum Pump, DN 160 CF, 969-9050

 

Varian V550 Overview:


The Turbo-V550 pump consists of a high frequency motor driving a turbine fitted with 8 bladed stages and 4 Macrotorr stages. The turbine rotates in an anticlockwise direction when viewed from the high vacuum flange end. 

The turbine is made of high-strength, light aluminium alloy, and is machined from a single block of aluminium. The turbine blades have six different angles, from 40° to 16°, while the Macrotorr stages are in form of discs

The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump.

The static blades of the stator are made of stainless steel. These are supported and accurately positioned by spacer rings.

The Macrotorr stators are in the form of selfpositioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are made of aluminium alloy.

During normal operation, the motor is fed with a voltage of 56 Vac three-phase at 700 Hz. To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio.

The external body of the pump is shaped so that the pump can function with natural convection air cooling. Kits are available for water cooling or forced air cooling to cool the pump in the cases where it is used under heavy load or when natural convection is insufficient for cooling purposes.

 

Varian V550 Compression Ratio:


Varian V550 Compression Ratio, 9699050, 969-9050

 

Varian V550 Dimensions:


Varian V550 Dimensions, 9699050, 969-9050


Click Here for Varian V550 Manual


A&J Vacuum also repair / rebuild and service Varian V550 / 9699049 Turbo Pumps V-550 and Turbo Pump Controllers  along with all other Varian and Agilent Technology Vacuum Rotary Vane Pumps, Varian Dry Scroll Pump repair, Varian Leak Detector Repair and all other Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN17585 Mfr Part#: 9698925 Manufacturer: Agilent Technologies / Varian
PRICE: $15,657.00
WEB SAVINGS: $8,662.00
YOU PAY: $6,995.00

Agilent Technologies / Varian TV551 Navigator Turbo Vacuum Pump, 6" CFF, 969-8925

 

Agilent/Varian TV551 Overview:


Turbo-V551 consists of a high frequency motor driving a turbine fitted with 8 bladed stages and 4 Macrotorr stages. The turbine rotates in a counterclockwise direction when viewed from the high vacuum flange end.

The Agilent TV 551 9698925 turbine is made of high-strength aluminium alloy, machined from a single block. The Macrotorr stages are in the form of four discs. The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump. The static blades of the stator are made of stainless steel. These are supported and accurately positioned by spacer rings. The Macrotorr V551 stators are in the form of selfpositioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are made of aluminium alloy.

During normal operation Varian V-551 969-8925 the motor is fed with a voltage of 54 Vac three-phase at 715 Hz. To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio. The pump can be water cooled or air cooled: in the first case the customer can use the dedicated channels on the pump body, in the second case an external optional fan is available. A thermistor sensor is mounted near the upper bearing to prevent the pump from overheating.


The Agilent Varian TV 551 Navigator pump is balanced after assembly with a residual vibration amplitude less than 0.01. The pump can operate in any position and can be supported on the high vacuum flange. The connection of the forevacuum on the side of the pump is a KF 25 NW flange.


Agilent V 551 Turbo Pump is very popular among many Analytical Instrument manufacturers. Varian Navigator pump is being used in many SEM Scanning Electron Microscopes, Mass Spectrometers along with Ion-Beam Instruments and Systems. Agilent Varian Turbo-V 551 Navigator turbomolecular pump is very cost efective for many applications within semiconductor applications and manufacturing.

 

Agilent/Varian TV551 Characteristic:


Agilent Varian TV551, 9698923, Characteristic

 

Agilent/Varian TV551 Dimensions:


Agilent Varian TV551, 9698923, Dimensions


Click Here for Agilent/Varian TV 551 Manual


A&J Vacuum also repair / rebuild and service Varian V551 9698925 Turbo pumps along with all other Agilent Turbo pumps and Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Contact
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.