phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
Main Categories

- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: Edwards Vacuum
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Laboratory Pipette Washers
- Laboratory Stirrers
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 8 products
Item#: PN07045 Mfr Part#: A37124919, G1099-80024 Manufacturer: Edwards Vacuum
PRICE: $2,900.00
WEB SAVINGS: $524.00
YOU PAY: $2,376.00

Refurbished Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 220-240VAC, A37124919, (A371-24-919)HP G1099-80024

 

Edwards Vacuum E2M1.5 Overview:


The E2M1.5 / A37124919 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

This pump is alsko known as HP1099-80023, or HP109980023 set to 115 VAC.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 1.5 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 1.5 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured In Stock
Item#: PN21041 Mfr Part#: G1099-80023 / A37124902 Manufacturer: Edwards Vacuum
PRICE: $4,200.00
WEB SAVINGS: $1,805.00
YOU PAY: $2,395.00

Refurbished Edwards E2M1.5, G1099-80023 Vacuum Pump, Hydrocarbon oil, 115VAC, A37124902, used with series 5973 Gas chromatography / 5973 Mass Spectrometry.

 

Edwards Vacuum E2M1.5 Overview:


The E2M1.5 / G109980023 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

This pump is alsko known as HP1099-80023, or HP109980023 set to 115 VAC.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 1.5 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 1.5 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured In Stock
Item#: PN06445 Mfr Part#: A37132902 Manufacturer: Edwards Vacuum
Price upon request

Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 100-120 VAC, A37132902, (A371-32-902)

 

Edwards Vacuum E2M1.5 Overview:


The E2M1.5 / A37132902 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 1.5 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 1.5 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN07381 Mfr Part#: Manufacturer: Edwards Vacuum
Price upon request

Edwards E2M1 Vacuum Pump, Rotary Vane Pump, Hydrocarbon Elite Z Oil, 220-240VAC

 

Edwards Vacuum E2M1 Overview:


The E2M1 pumps are two-stage, direct drive, sliding vane pumps. The pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

Unit is fully rebuilt and comes with a FULL 6-MONTH WARRANTY!

 

Edwards Vacuum E2M1 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M0.7, E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN17161 Mfr Part#: A37122919 Manufacturer: Edwards Vacuum
Price upon request

Refurbished Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 200-230 VAC, A37122919, (A371-22-919)

 

Edwards Vacuum E2M1.5 Overview:


The E2M1.5 / A37122919 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

This pump is alsko known as HP1099-80023, or HP109980023 set to 115 VAC.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 1.5 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 1.5 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN17944 Mfr Part#: A37124902 Manufacturer: Edwards Vacuum
Price upon request

Refurbished Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 120 VAC, A37124902

 

Edwards Vacuum E2M1.5 Overview:


The E2M1.5 / A37124902 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

This pump is alsko known as HP1099-80023, or HP109980023 set to 115 VAC.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 1.5 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 1.5 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN22535 Mfr Part#: A37122902 Manufacturer: Edwards Vacuum
Price upon request

Refurbished Edwards E2M1.5 Vacuum Pump, Dual Stage Rotary Vane Pump, Hydrocarbon oil,100/120 VAC 50Hz, 100/115 VAC 60 Hz A37122902, A371-22-902

 

Edwards Vacuum E2M1.5 Overview:


The Edwards Vacuum E2M 1.5 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 1.5 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 1.5 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M1.5 Dimensions:


Edwards E2M1.5, A37132919, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Item#: PN23574 Mfr Part#: A37142902 Manufacturer: Edwards Vacuum
Price upon request

Fully rebuilt Edwards E2M0.7 (E2 M0.7) Dual Stage Rotary Vane Pump with NW10 Inlet Flange and 11mm Outlet Flange, 100-120V 1PH 50/60HZ, A37142902

 

Edwards Vacuum E2M0.7 Overview:


The Edwards Vacuum E2M 0.7 pumps are two-stage, direct drive, sliding vane pumps. The E2M0.7 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.

The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.

 

Edwards Vacuum E2M 0.7 Applications:


  • Analytical instruments
  • Laboratory bench top vacuum
  • Leak detectors, Helium
  • Research and development
  • Backing turbomolecular pumps

 

Edwards Vacuum E2M 0.7 Features:


  • Pumping speeds of either 0.7 to 1.5 m3h‑1. 
  • Industry proven long term reliable performance. 
  • Free standing, compact design providing flexibility of use. 
  • Alternate side inlet connection port so that overall installation height can be reduced to minimum when required. 
  • Low noise, with the E2M0.7 at just 43 dB(A). 
  • Low energy consumption, with the E2M0.7 at 0.09 kW. 
  • O ring sealed sight glass allows visual inspection of oil level and condition. 
  • Gas ballast valve for large water vapour handling capacity. 
  • Simple installation and operation with no customer wiring. 
  • Forced air cooling ensures low pump surface temperature. 
  • Internal ATEX classification of Ex II 3 G c IIB T4. 
  • Approved EN61010, CSA22.2 and UL61010.

 

Edwards Vacuum E2M0.7 Dimensions:


Edwards E2M1.5, A37142902, Dimensions


A&J Vacuum also repair / rebuild and service all Edwards E2M0.7, E2M1.5, E2M2, E2M5, E2M8, E2M12 Series  Vacuum Pumps  along with all other Edwards  Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854


Condition: Remanufactured Call us for Availability
Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.