Turbovac TMP
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
- MFG P/N 85400
- NW KF 40 Inlet Flange
- Fully Remanufactured
- Like New !
Fully Remanufactured Leybold TurboVac TMP 50 Turbo Pump, KF 40, 85400, TMP50
Leybold TurboVac TMP 50 Overview:
The Leybold TURBOVAC TMP50 P/N 85400 turbomolecular pumps featuring grease-lubricated bearings. These units are engineered to pump vacuum chambers down to pressures in the high-vacuum range. A TURBOTRONIK NT 10 frequency converter and a forevacuum pump are required for the operation of the TURBOVAC TMP-50
These Leybold TMP 50 Turbo Pumps are not suitable for operation without a forevacuum pump.
Leybold TMP50 Turbomolecular pumps are not suitable for pumping either gases which contain dust particles or liquids.
Turbovac 50Turbomolecular pumps without a purge gas feature are suitable only for moving air or inert gases. They are not suitable for pumping aggressive or reactive gases.
Leybold TURBOVAC TMP 50 versions identified with a “C” in the model number are equipped with this purge gas feature, it protects only the bearing area and the motor in the TURBOVAC.
Some media (such as aluminum trichloride) can sublime inside the pump and form deposits. Thick deposits reduce the play between moving parts to the point that the pump could seize. In some processes deposits can be prevented by heating the pump. Please consult with us in case such problems arise.
Corrosive gases (such as chlorine) can destroy the rotors.
During operation the pressure inside the TURBOVAC TMP50 turbo pump is so low that there is no danger of ignition (at pressures below about 100 mbar, 75 Torr). A hazardous condition will be created if flammable mixtures enter the hot pump at pressures above 100 mbar (75 Torr). During operation the pump can reach temperatures as high as 120°C (248 °F). Sparks could occur in case of damage to the pump and these could ignite explosive mixtures.
Leybold TurboVac TMP 50 Pumping speed:
Leybold TurboVac TMP 50 Dimensions:
A&J Vacuum Repair / Rebuild and Service Oerikon Leybold Turbovac TMP 50 Turbo Vacuum Pumps, Oerlikon Leybold Booster Pumps along with all other Leybold Vacuum Rotary Vane Pumps, Leybold Dry Scroll Pump repair, Leybold Leak Detector Repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Leybold TurboVac TMP 50 Turbo Pump, KF 40, 85400, TMP50
Leybold TurboVac TMP 50 Technical Data:
A&J Vacuum Repair / Rebuild and Service Oerikon Leybold Turbovac TMP 50 Turbo Vacuum Pumps, Oerlikon Leybold Booster Pumps along with all other Leybold Vacuum Rotary Vane Pumps, Leybold Dry Scroll Pump repair, Leybold Leak Detector Repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Leybold TMP50, TMP151, TMP361, TMP1000, Turbovac pump, TMP 361, Turbovac
Leybold_TurboVac_TMP_50_Brochure.pdf 
|
Service and Repair - Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Overview
Fully Remanufactured Leybold TurboVac TMP 50 Turbo Pump, KF 40, 85400, TMP50
Leybold TurboVac TMP 50 Overview:
The Leybold TURBOVAC TMP50 P/N 85400 turbomolecular pumps featuring grease-lubricated bearings. These units are engineered to pump vacuum chambers down to pressures in the high-vacuum range. A TURBOTRONIK NT 10 frequency converter and a forevacuum pump are required for the operation of the TURBOVAC TMP-50
These Leybold TMP 50 Turbo Pumps are not suitable for operation without a forevacuum pump.
Leybold TMP50 Turbomolecular pumps are not suitable for pumping either gases which contain dust particles or liquids.
Turbovac 50Turbomolecular pumps without a purge gas feature are suitable only for moving air or inert gases. They are not suitable for pumping aggressive or reactive gases.
Leybold TURBOVAC TMP 50 versions identified with a “C” in the model number are equipped with this purge gas feature, it protects only the bearing area and the motor in the TURBOVAC.
Some media (such as aluminum trichloride) can sublime inside the pump and form deposits. Thick deposits reduce the play between moving parts to the point that the pump could seize. In some processes deposits can be prevented by heating the pump. Please consult with us in case such problems arise.
Corrosive gases (such as chlorine) can destroy the rotors.
During operation the pressure inside the TURBOVAC TMP50 turbo pump is so low that there is no danger of ignition (at pressures below about 100 mbar, 75 Torr). A hazardous condition will be created if flammable mixtures enter the hot pump at pressures above 100 mbar (75 Torr). During operation the pump can reach temperatures as high as 120°C (248 °F). Sparks could occur in case of damage to the pump and these could ignite explosive mixtures.
Leybold TurboVac TMP 50 Pumping speed:
Leybold TurboVac TMP 50 Dimensions:
A&J Vacuum Repair / Rebuild and Service Oerikon Leybold Turbovac TMP 50 Turbo Vacuum Pumps, Oerlikon Leybold Booster Pumps along with all other Leybold Vacuum Rotary Vane Pumps, Leybold Dry Scroll Pump repair, Leybold Leak Detector Repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Specifications
Leybold TurboVac TMP 50 Turbo Pump, KF 40, 85400, TMP50
Leybold TurboVac TMP 50 Technical Data:
A&J Vacuum Repair / Rebuild and Service Oerikon Leybold Turbovac TMP 50 Turbo Vacuum Pumps, Oerlikon Leybold Booster Pumps along with all other Leybold Vacuum Rotary Vane Pumps, Leybold Dry Scroll Pump repair, Leybold Leak Detector Repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Spare Parts
Accessories
Service & Repair
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
