ULVAC TM-2 (F) Oil Mist Trap for PKS-016 Series Rotary Piston Pumps, 1013284
ULVAC TM-3
Removes oil droplets (“smoke”)
Pump oil vapor is greatly reduced reducing contamination in addition the need to regularly replenish the pump oil is likewise greatly reduced.
Noise is most effectively reduced when the pump starts from atmospheric pressure, during low vacuum pumping, and during gas ballast operations. Low frequency noise is particularly reduced.
Selectable oil recovery method (optional)
When trapped oil is returned directly to the main pumping unit and reused, the filter lifespan is decreased and pump problems may occur.
Since recovery of the trapped oil is dependent on pump operating conditions, please consult Ulvac for advice about your particular pumping task and to help ensure the correct match of components for your application.
Since the connection ports of TM series units are made to match standard pump exhaust ports, attachment is simple. (Excluding VD601 and VD901)
The internal filter element is a replaceable cartridge
Replacing this filter cartridge is simple. (An adapter is required when changing filters of old TM-3, 4, and 4S models to cartridge filters)
*1 Be sure to use an oil mist trap that is appropriately sized to match the pumping speed of the pump and the volume of the chamber which is being evacuated.
*2 An adapter is required for attachment to PVD series, VD151 and VD201.
*3 Oil recovery cannot be used with TMX-1 and TMX-2 models.
*4 Conversion to a cartridge filter is not possible for TMX-1, TMX-2, and TM-2 (old model) units.
ULVAC TM-2 (F) Oil Mist Trap for PKS-016 Series Rotary Piston Pumps, 1013284
Model | Attachment flange *1 | Vacuum pump used | Weight(kg) | Material |
TMX-1 | Special flange/ G1 1/2 |
PVD-180(B) *2 PVD-360(B) VD151 VD201 |
1.1 | Trap : Mild steel (SPCC) Filter : Glass wool |
TM201 | VF40/G 1・1/2 | VD301 (for low loads)*5 VD401 (for low loads) |
8.5 | |
TM401 | VF40/G 1・1/2 | VD301 (for high loads) *6 VD401 (for high loads) VD601 (for low loads) VD901 (for low loads) |
10 | |
TM-2 (standard, F) *3 |
VG50/G2, VG50 (for PKS-016) VF40/G2, VG50 (for VD601/VD901) |
PKS-016 VD601 (for high loads)*2 VD901 (for high loads) |
5.7(6.2) *4 | |
TM-3 (standard, F)
|
VG80/G3, VG80 (for PKS-030) VF50\G3, VG80 (for VS1501) |
PKS-030 VS1501 |
10(11.5)*4 | |
TM-4 (standard, F) |
VG100/G4, VG100 8for PKS-070) VF50/G4, VG100 (for VS2401) |
PKS-070 VS2401 |
23.5(25)*4 | |
TM-4S | VG100/VG100 (for PKS-070) VF50/VG100 (for VS2401) |
PKS-070 (for high loads) VS2401 (for high loads) |
59 |
*1 Pump attachment flange : JIS B2290 vacuum flange (except for special flanges)/vent pipe screw size
*2 Adapter is required when attaching to PVD-180(B), PVD-360(B), VD151, VD201, VD601, and VD901.
*3 Standard : Umbrella type; F : Flange type.
*4 Values in ( ) indicate mass with flange attached.
*5 Low load models should have a cntinuous suction Pressure.
*6 Hgh load models should have a continuous suction pressure of 100kPa or less.
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
ULVAC TM-2 (F) Oil Mist Trap for PKS-016 Series Rotary Piston Pumps, 1013284
ULVAC TM-3
Removes oil droplets (“smoke”)
Pump oil vapor is greatly reduced reducing contamination in addition the need to regularly replenish the pump oil is likewise greatly reduced.
Noise is most effectively reduced when the pump starts from atmospheric pressure, during low vacuum pumping, and during gas ballast operations. Low frequency noise is particularly reduced.
Selectable oil recovery method (optional)
When trapped oil is returned directly to the main pumping unit and reused, the filter lifespan is decreased and pump problems may occur.
Since recovery of the trapped oil is dependent on pump operating conditions, please consult Ulvac for advice about your particular pumping task and to help ensure the correct match of components for your application.
Since the connection ports of TM series units are made to match standard pump exhaust ports, attachment is simple. (Excluding VD601 and VD901)
The internal filter element is a replaceable cartridge
Replacing this filter cartridge is simple. (An adapter is required when changing filters of old TM-3, 4, and 4S models to cartridge filters)
*1 Be sure to use an oil mist trap that is appropriately sized to match the pumping speed of the pump and the volume of the chamber which is being evacuated.
*2 An adapter is required for attachment to PVD series, VD151 and VD201.
*3 Oil recovery cannot be used with TMX-1 and TMX-2 models.
*4 Conversion to a cartridge filter is not possible for TMX-1, TMX-2, and TM-2 (old model) units.
ULVAC TM-2 (F) Oil Mist Trap for PKS-016 Series Rotary Piston Pumps, 1013284
Model | Attachment flange *1 | Vacuum pump used | Weight(kg) | Material |
TMX-1 | Special flange/ G1 1/2 |
PVD-180(B) *2 PVD-360(B) VD151 VD201 |
1.1 | Trap : Mild steel (SPCC) Filter : Glass wool |
TM201 | VF40/G 1・1/2 | VD301 (for low loads)*5 VD401 (for low loads) |
8.5 | |
TM401 | VF40/G 1・1/2 | VD301 (for high loads) *6 VD401 (for high loads) VD601 (for low loads) VD901 (for low loads) |
10 | |
TM-2 (standard, F) *3 |
VG50/G2, VG50 (for PKS-016) VF40/G2, VG50 (for VD601/VD901) |
PKS-016 VD601 (for high loads)*2 VD901 (for high loads) |
5.7(6.2) *4 | |
TM-3 (standard, F)
|
VG80/G3, VG80 (for PKS-030) VF50\G3, VG80 (for VS1501) |
PKS-030 VS1501 |
10(11.5)*4 | |
TM-4 (standard, F) |
VG100/G4, VG100 8for PKS-070) VF50/G4, VG100 (for VS2401) |
PKS-070 VS2401 |
23.5(25)*4 | |
TM-4S | VG100/VG100 (for PKS-070) VF50/VG100 (for VS2401) |
PKS-070 (for high loads) VS2401 (for high loads) |
59 |
*1 Pump attachment flange : JIS B2290 vacuum flange (except for special flanges)/vent pipe screw size
*2 Adapter is required when attaching to PVD-180(B), PVD-360(B), VD151, VD201, VD601, and VD901.
*3 Standard : Umbrella type; F : Flange type.
*4 Values in ( ) indicate mass with flange attached.
*5 Low load models should have a cntinuous suction Pressure.
*6 Hgh load models should have a continuous suction pressure of 100kPa or less.
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.