Edwards WRG Controllers

The Edwards WRG-S-NW 25 Wide Range Gauge family offers the capability of single port pressure measurement in the range from atmosphere to 10-9 mbar with a linear output. WRG Gauge P/N D14701000 Its a compact solution, halving the space and connectivity hardware requirement, which can be all important in many applications.

The Edwards WRG Vacuum Gauge has many advanced features, including a new patented striker, easy pushbutton calibration and set point controls and comprehensive diagnostics.

The Edwards WRG Gauge is a low maintenance and cost effective vacuum management solution when used either with a Edwards Gauge controller or directly integrated into the vacuum system controls.

*THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED*

Edwards WRG-S NW25 Technology:

The Edwards WRG vacuum gauge has two gauges built in one, using Pirani technology for the upper pressure ranges, with a seamless switch over to an inverted magnetron for the lower range.

For ease of operation and more accurate pressure reading, the vacuum setting of the Edwards Pirani gauge is set automatically, while a single pushbutton sets atmospheric pressure. The Edwards WRG-S-NW25 has an easy to program set-point which operates over the entire measurement range.

The Edwards WRG magnetron Gauge uses an advanced technique for highly reliable striking, even at high vacuum or in relatively contaminated conditions. To optimize the lifetime of the gauge, the magnetron HT voltage is reduced after ignition and the magnetron operates with a low discharge current.

The Edwards WRG-S-NW25 meets EMC requirements for both light industrial emissions and heavy industrial immunity.

Edwards WRG-S NW25 Features:

Microprocessor signal processing gives seamless transition between Pirani and magnetron outputs as well as linear output (log pressure scale)
D-type version including cable strain relief and enhanced ingress protection - IP44
Low magnetic field version (SL) available for sensitive applications e.g. mass spectrometry and electron microscopy
Easily programmed set point covering entire measuring range
Magnetron uses an advanced patented technique for highly reliable striking, even at high vacuum or in relatively contaminated conditions
Automatic vacuum setting of Pirani gauge element
Single push button atmosphere setting
Extended service intervals and gauge lifetime, through reduction of HT voltage after ignition and low discharge current
Ultra compact, featuring recessed electrical connector
Easy service; both Pirani and magnetron elements are individually replaceable
Comprehensive failure mode diagnostics facility

Edwards WRG-S NW25 Dimensions:

Edwards WRG-S NW25, D14701000

Click here for Edwards WRG-S-NW25 Operation Manual D14701000

Click here for Edwards WRG Series Broshure

A&J Vacuum services and repairs Edwards Vacuum Measurement Transmitters, along with all other Edwards Vacuum and Turbo Pumps available on our website. Please contact us for additional information concerning our service program or click http://www.ajvs.com/service.php to access our Services page. We likewise offer emergency service and repair upon request. For more information, please contact A&J Vacuum Services at (973) 249-0854. Thank you for choosing AJVS as your supplier.

Condition: New In Stock

Edwards WRG-S-DN40CF Wide Range Gauge, D14703000, Edwards WRG

Item#: PN20170 Mfr Part#: D14703000 Manufacturer: Edwards Vacuum

PRICE: $2,275.00

WEB SAVINGS: $125.00

YOU PAY: $2,150.00

Edwards WRG-S-DN40CF Wide Range Gauge, D14703000, EDWARDS WRG

Edward WRG-S DN40 CF Overview:

The Edwards WRG-S-DN40CF Wide Range Gauge family offers the capability of single port pressure measurement in the range from atmosphere to 10-9 mbar with a linear output. WRG Gauge P/N D14703000 Its a compact solution, halving the space and connectivity hardware requirement, which can be all important in many applications.

The Edwards WRG Vacuum Gauge has many advanced features, including a new patented striker, easy pushbutton calibration and set point controls and comprehensive diagnostics.

The Edwards WRG Gauge is a low maintenance and cost effective vacuum management solution when used either with a Edwards Gauge controller or directly integrated into the vacuum system controls.

Edward WRG-S DN40 CF Technology:

The Edwards WRG vacuum gauge has two gauges built in one, using Pirani technology for the upper pressure ranges, with a seamless switch over to an inverted magnetron for the lower range.

For ease of operation and more accurate pressure reading, the vacuum setting of the Edwards Pirani gauge is set automatically, while a single pushbutton sets atmospheric pressure. The Edwards WRG-S-DN40CF has an easy to program set-point which operates over the entire measurement range.

The Edwards WRG magnetron Gauge uses an advanced technique for highly reliable striking, even at high vacuum or in relatively contaminated conditions. To optimize the lifetime of the gauge, the magnetron HT voltage is reduced after ignition and the magnetron operates with a low discharge current.

The Edwards WRG-S-DN40CF meets EMC requirements for both light industrial emissions and heavy industrial immunity.

Edward WRG-S DN40 CF Features:

Microprocessor signal processing gives seamless transition between Pirani and magnetron outputs as well as linear output (log pressure scale)
D-type version including cable strain relief and enhanced ingress protection - IP44
Low magnetic field version (SL) available for sensitive applications e.g. mass spectrometry and electron microscopy
Easily programmed set point covering entire measuring range
Magnetron uses an advanced patented technique for highly reliable striking, even at high vacuum or in relatively contaminated conditions
Automatic vacuum setting of Pirani gauge element
Single push button atmosphere setting
Extended service intervals and gauge lifetime, through reduction of HT voltage after ignition and low discharge current
Ultra compact, featuring recessed electrical connector
Easy service; both Pirani and magnetron elements are individually replaceable
Comprehensive failure mode diagnostics facility

THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED

Dimensions:

Edwards WRG-S DN40 CF, D14703000

Click here for Edwards WRG-S-NW25 Operation Manual D14701000

Click here for Edwards WRG Series Broshure

Condition: New In Stock

Edwards WRG-S-NW25, D1470100C, Certificated Wide Range Gauge, D147-01-00C,

Item#: PN20171 Mfr Part#: D1470100C / D147-01-00C Certified Manufacturer: Edwards Vacuum

PRICE: $2,225.00

WEB SAVINGS: $309.05

YOU PAY: $1,915.95

Edwards WRG-S-NW25, Certificated Wide Range Gauge, D1470100C, EDWARDS WRG D147-01-00C Certified

Edwards WRG-S NW25 Overview:

The Edwards WRG-S-NW 25 Wide Range Gauge family offers the capability of single port pressure measurement in the range from atmosphere to 10-9 mbar with a linear output. WRG Gauge P/N D1470100C Its a compact solution, halving the space and connectivity hardware requirement, which can be all important in many applications.

The Edwards WRG Vacuum Gauge has many advanced features, including a new patented striker, easy pushbutton calibration and set point controls and comprehensive diagnostics.

The Edwards WRG Gauge is a low maintenance and cost effective vacuum management solution when used either with a Edwards Gauge controller or directly integrated into the vacuum system controls.

*THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED*

Edwards WRG-S NW25 Technology:

The Edwards WRG vacuum gauge has two gauges built in one, using Pirani technology for the upper pressure ranges, with a seamless switch over to an inverted magnetron for the lower range.

For ease of operation and more accurate pressure reading, the vacuum setting of the Edwards Pirani gauge is set automatically, while a single pushbutton sets atmospheric pressure. The Edwards Certified WRG-S-NW25 has an easy to program set-point which operates over the entire measurement range.

The Edwards WRG magnetron Gauge uses an advanced technique for highly reliable striking, even at high vacuum or in relatively contaminated conditions. To optimize the lifetime of the gauge, the magnetron HT voltage is reduced after ignition and the magnetron operates with a low discharge current.

The Edwards WRG-S-NW25 Certified meets EMC requirements for both light industrial emissions and heavy industrial immunity.

Edwards WRG-S NW25 Features:

Microprocessor signal processing gives seamless transition between Pirani and magnetron outputs as well as linear output (log pressure scale)
D-type version including cable strain relief and enhanced ingress protection - IP44
Low magnetic field version (SL) available for sensitive applications e.g. mass spectrometry and electron microscopy
Easily programmed set point covering entire measuring range
Magnetron uses an advanced patented technique for highly reliable striking, even at high vacuum or in relatively contaminated conditions
Automatic vacuum setting of Pirani gauge element
Single push button atmosphere setting
Extended service intervals and gauge lifetime, through reduction of HT voltage after ignition and low discharge current
Ultra compact, featuring recessed electrical connector
Easy service; both Pirani and magnetron elements are individually replaceable
Comprehensive failure mode diagnostics facility

Edwards WRG-S NW25 Dimensions:

Edwards WRG-S NW25, D1470100C

Click here for Edwards WRG-S-NW25 Operation Manual D1470100C

Click here for Edwards WRG Series Broshure

Condition: New

Edwards WRG-S-DN40CF, Certificated Wide Range Gauge, D1470300C

Item#: PN20172 Mfr Part#: D1470300C Manufacturer: Edwards Vacuum

PRICE: $2,169.00

WEB SAVINGS: $333.05

YOU PAY: $1,835.95

Edwards WRG-S-DN40CF, Certificated Wide Range Gauge, D1470300C, Edwards WRG Gauge, D147-03-00C

Edwards WRG-S DN40 CF Overview:

The Edwards WRG-S-DN40CF Certified Wide Range Gauge family offers the capability of single port pressure measurement in the range from atmosphere to 10-9 mbar with a linear output. WRG Gauge P/N D1470300C Its a compact solution, halving the space and connectivity hardware requirement, which can be all important in many applications.

The Edwards WRG Vacuum Gauge has many advanced features, including a new patented striker, easy pushbutton calibration and set point controls and comprehensive diagnostics.

The Edwards WRG Gauge is a low maintenance and cost effective vacuum management solution when used either with a Edwards Gauge controller or directly integrated into the vacuum system controls.

Edwards WRG-S DN40 CF Technology

The Edwards WRG vacuum gauge has two gauges built in one, using Pirani technology for the upper pressure ranges, with a seamless switch over to an inverted magnetron for the lower range.

For ease of operation and more accurate pressure reading, the vacuum setting of the Edwards Pirani gauge is set automatically, while a single pushbutton sets atmospheric pressure. The Edwards WRG-S-DN40CF has an easy to program set-point which operates over the entire measurement range.

The Edwards WRG magnetron Gauge uses an advanced technique for highly reliable striking, even at high vacuum or in relatively contaminated conditions. To optimize the lifetime of the gauge, the magnetron HT voltage is reduced after ignition and the magnetron operates with a low discharge current.

The Edwards WRG-S-DN40CF meets EMC requirements for both light industrial emissions and heavy industrial immunity.

*THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED*

Edwards WRG-S DN40 CF

Microprocessor signal processing gives seamless transition between Pirani and magnetron outputs as well as linear output (log pressure scale)
D-type version including cable strain relief and enhanced ingress protection - IP44
Low magnetic field version (SL) available for sensitive applications e.g. mass spectrometry and electron microscopy
Easily programmed set point covering entire measuring range
Magnetron uses an advanced patented technique for highly reliable striking, even at high vacuum or in relatively contaminated conditions
Automatic vacuum setting of Pirani gauge element
Single push button atmosphere setting
Extended service intervals and gauge lifetime, through reduction of HT voltage after ignition and low discharge current
Ultra compact, featuring recessed electrical connector
Easy service; both Pirani and magnetron elements are individually replaceable
Comprehensive failure mode diagnostics facility

Dimensions:

Edwards WRG-S DN40 CF, D1470300C

Click here for Edwards WRG-S-DN40CF Operation Manual D1470300C

Click here for Edwards WRG Series Broshure

Condition: New

Edwards WRG-D-NW25 Wide Range Gauge, S/S, D14702000, Edwards WRG D147-02-000

Item#: PN23540 Mfr Part#: D14702000 / D147-02-000 Manufacturer: Edwards Vacuum

Price upon request

Edwards WRG-D-NW25 Wide Range Gauge, S/S, D14702000, Edwards WRG D147-02-000

Edwards WRG-S NW25 Overview:

The Edwards WRG-D-NW 25 / D147-02-000 Wide Range Gauge family offers the capability of single port pressure measurement in the range from atmosphere to 10-9 mbar with a linear output. WRG Gauge P/N D14702000 Its a compact solution, halving the space and connectivity hardware requirement, which can be all important in many applications.

The Edwards WRG Vacuum Gauge has many advanced features, including a new patented striker, easy pushbutton calibration and set point controls and comprehensive diagnostics.

The Edwards WRG Gauge is a low maintenance and cost effective vacuum management solution when used either with a Edwards Gauge controller or directly integrated into the vacuum system controls.

*THERE ARE NO RETURNS ON THIS PRODUCT IF PRODUCT IS OPENED OR USED*

Edwards WRG-D NW25 Technology:

The Edwards WRG vacuum gauge has two gauges built in one, using Pirani technology for the upper pressure ranges, with a seamless switch over to an inverted magnetron for the lower range.

For ease of operation and more accurate pressure reading, the vacuum setting of the Edwards Pirani gauge is set automatically, while a single pushbutton sets atmospheric pressure. The Edwards WRG-D-NW25 has an easy to program set-point which operates over the entire measurement range.

The Edwards WRG magnetron Gauge uses an advanced technique for highly reliable striking, even at high vacuum or in relatively contaminated conditions. To optimize the lifetime of the gauge, the magnetron HT voltage is reduced after ignition and the magnetron operates with a low discharge current.

The Edwards WRG-D-NW25 meets EMC requirements for both light industrial emissions and heavy industrial immunity.

Edwards WRG-S NW25 Features:

Microprocessor signal processing gives seamless transition between Pirani and magnetron outputs as well as linear output (log pressure scale)
D-type version including cable strain relief and enhanced ingress protection - IP44
Low magnetic field version (SL) available for sensitive applications e.g. mass spectrometry and electron microscopy
Easily programmed set point covering entire measuring range
Magnetron uses an advanced patented technique for highly reliable striking, even at high vacuum or in relatively contaminated conditions
Automatic vacuum setting of Pirani gauge element
Single push button atmosphere setting
Extended service intervals and gauge lifetime, through reduction of HT voltage after ignition and low discharge current
Ultra compact, featuring recessed electrical connector
Easy service; both Pirani and magnetron elements are individually replaceable
Comprehensive failure mode diagnostics facility

Edwards WRG-S NW25 Dimensions:

Edwards WRG-S NW25, D14701000

Click here for Edwards WRG Series Broshure

Condition: New