RV Series
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
- Ultimate pressure: 2 x 10-3 mbar
- Pumping speed (50 Hz): 3.3 m3h-1
- Inlet flange: NW 25
- Noise level: 48 dB(A) at 50 Hz
Edwards RV3 Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, Factory set to 115V for USA, Hydrocarbon Oil, A652-01-906, Edwards RV-3 A65201906
Edwards RV3 Overview:
Edwards RV3 are proven to be a leading vacuum pumps throught out vacuum pump industry.
Edwards RV3 / A65201906 pump sets new standards for laboratory vacuum pumps, proven pump performance and outstanding quality speaks for itself.
RV3 pump offers following features;
-
Adjustable gas ballast - Excellent water vapor handling capacity
-
Patented Inlet Valve - offers smooth opening and fast closing
-
Integral air bleed - offers quiet operation
-
RV Series pump is equipped with Wide Range Voltage Motors - All major countries covered.
-
Motor on/off switch.
-
Patented Vacuum mode switch - High Vacuum or throughput in one pump
Edwards RV Series Pumps are significantly quieter – noise levels of 48 dBA 50Hz are typically half the noise of a conventional pump and have been achieved by extensive work on the drive train and motor.
The RV3 pumps have the unique ability to deliver excellent ultimate vacuum in both high vacuum and high throughput modes with or without gas ballast. This gives the user an unrivalled opportunity to select the optimum pumping performance without compromising the application.
In its high vacuum mode, the Edwards RV3 pump is ideal for analytical instruments, electron microscopes, physics research, backing turbo pumps and leak detection applications. Configure the same pump in the high throughput mode, and it becomes suitable for distillation, laboratory furnaces, backing vapor pumps, solvent concentration, freeze drying and other drying applications.
The simple to use mode selector and accessible, three-position gas ballast control allow the pump to be reconfigured at any time, even when the pump is running.
Edwards RV 3 pumps have become the industry standard for scientific primary pumping applications. RV3 pumps are uniquely capable of delivering high or low throughputs with high ultimate vacuum. This, combined with ultra-low noise levels, makes them ideal for a wide range of applications including GCMS and other small bench top type applications.
Typical Applications of the Edwards RV Series Rotary Vane Pumps include:
- Analytical instruments - GCMS
- Centrifuges, ultra-high speed
- Vacuum Coating
- Degassing / curing - oil, epoxy resin
- Distillation / extraction / filtration
- Freeze drying
- Vacuum Furnaces
- Gas bottle filling / emptying
- Gel drying
- Glove boxes, vacuum ovens
- Laboratory vacuum pump
- Helium Leak detectors
- Load locks and transfer chambers
- Refrigeration manufacture
- Refrigeration manufacture
- Rotary, centrifugal evaporators
- SEM Scanning electron microscopes
- Surface science instruments
- Turbomolecular backing pumps
Edwards RV3 Dimensions:
Click Here to view Edwards RV Series Instruction Manual
Click Here to view Edwards RV Series Manufacturer Brochure
A&J Vacuum also repair / rebuild and service all Edwards RV3 / A652-01-906 RV5, RV8, RV12, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Edwards RV3 Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, Factory set to 115V for USA, Hydrocarbon Oil, A652-01-906, Edwards RV-3 65201906
Edwards RV3 Technical Data:
Click Here to view Edwards RV Series Instruction Manual
Click Here to view Edwards RV Series Manufacturer Brochure
A&J Vacuum also repair / rebuild and service all Edwards RV3 / A652-01-906 RV5, RV8, RV12, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Edwards_RV3 RV5 RV8 RV12_Instruction_Manual.pdf
Edwards_RV_Series_Brochure.pdf
Edwards RV3 RV5 RV8 RV12 OEM Brochure 
|
Service and Repair - Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Overview
Edwards RV3 Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, Factory set to 115V for USA, Hydrocarbon Oil, A652-01-906, Edwards RV-3 A65201906
Edwards RV3 Overview:
Edwards RV3 are proven to be a leading vacuum pumps throught out vacuum pump industry.
Edwards RV3 / A65201906 pump sets new standards for laboratory vacuum pumps, proven pump performance and outstanding quality speaks for itself.
RV3 pump offers following features;
-
Adjustable gas ballast - Excellent water vapor handling capacity
-
Patented Inlet Valve - offers smooth opening and fast closing
-
Integral air bleed - offers quiet operation
-
RV Series pump is equipped with Wide Range Voltage Motors - All major countries covered.
-
Motor on/off switch.
-
Patented Vacuum mode switch - High Vacuum or throughput in one pump
Edwards RV Series Pumps are significantly quieter – noise levels of 48 dBA 50Hz are typically half the noise of a conventional pump and have been achieved by extensive work on the drive train and motor.
The RV3 pumps have the unique ability to deliver excellent ultimate vacuum in both high vacuum and high throughput modes with or without gas ballast. This gives the user an unrivalled opportunity to select the optimum pumping performance without compromising the application.
In its high vacuum mode, the Edwards RV3 pump is ideal for analytical instruments, electron microscopes, physics research, backing turbo pumps and leak detection applications. Configure the same pump in the high throughput mode, and it becomes suitable for distillation, laboratory furnaces, backing vapor pumps, solvent concentration, freeze drying and other drying applications.
The simple to use mode selector and accessible, three-position gas ballast control allow the pump to be reconfigured at any time, even when the pump is running.
Edwards RV 3 pumps have become the industry standard for scientific primary pumping applications. RV3 pumps are uniquely capable of delivering high or low throughputs with high ultimate vacuum. This, combined with ultra-low noise levels, makes them ideal for a wide range of applications including GCMS and other small bench top type applications.
Typical Applications of the Edwards RV Series Rotary Vane Pumps include:
- Analytical instruments - GCMS
- Centrifuges, ultra-high speed
- Vacuum Coating
- Degassing / curing - oil, epoxy resin
- Distillation / extraction / filtration
- Freeze drying
- Vacuum Furnaces
- Gas bottle filling / emptying
- Gel drying
- Glove boxes, vacuum ovens
- Laboratory vacuum pump
- Helium Leak detectors
- Load locks and transfer chambers
- Refrigeration manufacture
- Refrigeration manufacture
- Rotary, centrifugal evaporators
- SEM Scanning electron microscopes
- Surface science instruments
- Turbomolecular backing pumps
Edwards RV3 Dimensions:
Click Here to view Edwards RV Series Instruction Manual
Click Here to view Edwards RV Series Manufacturer Brochure
A&J Vacuum also repair / rebuild and service all Edwards RV3 / A652-01-906 RV5, RV8, RV12, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Specifications
Edwards RV3 Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, Factory set to 115V for USA, Hydrocarbon Oil, A652-01-906, Edwards RV-3 65201906
Edwards RV3 Technical Data:
Click Here to view Edwards RV Series Instruction Manual
Click Here to view Edwards RV Series Manufacturer Brochure
A&J Vacuum also repair / rebuild and service all Edwards RV3 / A652-01-906 RV5, RV8, RV12, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Spare Parts
Accessories
Service & Repair
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
