- Fully Mobile Leak Detector
- Sensitivity Ranges: 10-4 through 10-8 atm cc/sec
- Min Detectable Leak at 1000 ppm: 2 x 10-9 atm cc/sec helium
- Primary Pump Type: SD-301 Rotary Vane Pump
Shopping Cart ( )
Agilent Technologies 959 Helium Leak Detector, SD-301 Rotary Vane Pump, Mobile Cart, 115 V, D9593500TM120
Condition:
Remanufactured
Call us for Availability
Item#:PN22869
Mfr Part#:D9593500TM120
Manufacturer:Agilent Technologies / Varian
Price upon request
CONTACT US
Features:
Varian 959 Helium Leak Detector, Mass Spectrometer with SD-301 Rotary Vane Pump, Mobile Cart, 115 V, D9593500TM120
Varian 959 Overview:
The Varian 959 and 959D Helium Leak detectors are portable, self-contained mass spectrometer helium leak detectors using respectively dry and wet (oil-based) vacuum roughing pumps.
The Vacian SD-301 Rotary Vane Pump in the 959 Wet makes the system particularly very robust and reliable.
The Varian SD301 backing pump meets most mechanical vacuum pumping needs, except in clean room applications.
The Varian 959 Leak Detector systems provide clean and automatic leak detection utilizing the Contra-Flow™ vacuum system design that allows testing at high test point pressures.
The Variran SD-301 high vacuum mechanical pump in the 959 provides the same functions in situations where the oil-free aspects of the 959D are not required.
A Varian Turbo Pump is used to achieve very high vacuum in the spectrometer tube.
The Varian SD 301 roughing pump is located on the cart below the leak detector. An optional power probe accessory allows the leak detector to operate as a quick-response, high-sensitivity sniffing leak detector.
The basic pump components are:
Test port that connects the leak detector to the unit under test or to an associated vacuum system
High vacuum turbo pump
Spectrometer tube
959 Wet: SD-301 oil-based mechanical vacuum pump
Leak detector electronics
Front control panels, rear I/O, and power panel on cart
Operation of this Varian 959 detector is performed using primary controls located on the front of the leak detector and secondary controls located behind a locking access door, also at the front of the leak detector. The front view is shown in Figure 1-1 and Figure 1-2. The 959 leak detector electronics operate the spectrometer assembly, control the high vacuum pump, control the valve block, and provide leak rate and system status information to the operator through bar graph and LED indicators on the front panel, through audio, or through an optional meter or chart recorder.
Varian 959 Dimensions:
Click Here for Varian 959 Manual Instruction
A&J Vacuum Services offers full repair/service of Varian 959 Helium Leak Detectors, along with all other brands of helium leak detectors offered on our website. AJVS also services Pfeiffer turbo pumps and rotary vane pumps. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.
This item is non-returnable/non-refundable
Varian 959 Helium Leak Detector, Mass Spectrometer with SD-301 Rotary Vane Pump, Mobile Cart, 115 V, D9593500TM120
Varian 959 Technical Data:
| Sensitivity Ranges: | 10-4 through 10-8 atm cc/sec |
| Min Detectable Leak at 1000 ppm: | 2 x 10-9 atm cc/sec helium |
| Max Test Port Pressure: | 1 Torr |
| High Vacuum Pump: | V70 Macro Torr Turbo/Drag Pump |
| Primary Pump Type: | SD-301 Rotary Vane Pump |
| Inlet Flange: | NW 25 |
| Calibration Routine: | Manual |
Click Here for Varian 959 Manual Instruction
A&J Vacuum Services offers full repair/service of Varian 959 Helium Leak Detectors, along with all other brands of helium leak detectors offered on our website. AJVS also services Pfeiffer turbo pumps and rotary vane pumps. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.
Item#:PN05859
Mfr Part#:Elite Z
Condition: In Stock
New
In Stock
$128.00
Get started with your repair:
We can have a repair estimate ready for your equipment within the hour of submission.
Start your equipment repair process by creating a Service RMA.
High quality service guaranteed
A&J Vacuum Services provides repairs on all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair and Mass Spectrometer repair. Our highly trained technicians will deliver the highest quality service and satisfaction.
We operate at our own full service repair facility which allows us to quickly and economically perform all repairs in a timely manner. Our advandced machinery enables us to handle all facets of the service and repair process. AJVS utilizes industry standard vibration analysis equipment and advanced testing equipment to troubleshoot and minimize all equipment failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
AJVS repair process:
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly of the pump, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and log pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10 -Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
We can repair your:
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
Deals & Promotions
-
Edwards ELD500 Wet Portable Leak Detector With Integral Oil Sealed Rotary Vane Pump, 100-120V 60Hz, D13510906 ELD 500Item#: PN23588 Mfr Part#: D13510906
-
Pfeiffer HiScroll 6 Dry Scroll Pump with Manual Gas Ballast, 3.59 cfm, 100 - 127 V, 200 - 240 VAC, Single Phase, 50/60 HZ, ATEX, 2000026552 / PD S10 000 B / PDS10000BItem#: PN23774 Mfr Part#: 2000026552 / PD S10 000 B / PDS10000B
-
Leybold Scrollvac 3 Plus Scroll Pump, Oil-Free Dry Pump, 1-phase, 50/60 Hz, 115 V, 3.5 m3/h, 142030V310Item#: PN41078 Mfr Part#: 142030V310
-
Leybold Turbolab Core 90i Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 63 ISO-K), DIVAC 1.4T Diaphragm Pump, 501591V00000500Item#: PN24393 Mfr Part#: 501591V00000500
-
Pfeiffer HiScroll 18 Dry Scroll Pump with Manual Gas Ballast, Pressure Sensor Included, 10.65 cfm, 100 - 127 V, 200 - 240 VAC, Single Phase, 50/60 HZ, 2000026597 / PDS30010B / PD S30 010 BItem#: PN23779 Mfr Part#: 2000026597 / PDS30010B / PD S30 010 B
-
Edwards nXDS6iC Dry Scroll Vacuum Pump, Corrosive, 3.6 CFM / 100 - 127 V, 200 - 240 V, Single Phase, 50/60 Hz, A73502983Item#: PN15783 Mfr Part#: A73502983
-
Edwards Turbo Station T85H T-Station Turbo Pumping T Station, Includes nEXT85H Turbo Pump, 100-120 VAC (DN 63 CF-F), E2M1.5 Vacuum Pump, TS85W3002Item#: PN22443 Mfr Part#: TS85W3002
-
Edwards Turbo Station T85H T-Station Turbo Pumping T Station, Includes EXT85DX Turbo Pump, 100-120 VAC (DN 63 ISO-K), E2M1.5 Vacuum Pump, TS85W2002Item#: PN24550 Mfr Part#: TS85W2002
-
Pfeiffer Adixen ASM 340 D, Helium Leak Detector Dry Version, Universal Voltage 90-240 V, 50/60 Hz, KSBA00A2MM9A, Configurable I/O 37 pins, RS-232 and USB. Like New !Item#: PN17195 Mfr Part#: KSBA00A2MM9APrice upon request
-
Pfeiffer HiCube 300 Eco Turbo Pumping Station, Includes HiPace 300 Turbo Pump ISO 100, MVP 030-3 DC Diaphragm Vacuum Pump and DCU 002 Control Unit, 100-240 V 50/60 Hz, PMS7620000 / PM 025 019 AT / PM025019ATItem#: PN20408 Mfr Part#: PMS7620000 / PM 025 019 AT / PM025019AT
-
Edwards EMF 20 Oil Mist Exhaust Filter, Includes Mist Element and Odor Element, A46229000Item#: PN00844 Mfr Part#: A46229000
-
Pfeiffer ASM 390 Mobile Helium Leak Detector with ACP 40 Dry Scroll Pump and SplitFlow 80, ASM390, 2000034669 / CSGB01G2MM9AItem#: PN22455 Mfr Part#: 2000034669 / CSGB01G2MM9A
-
Leybold Scrollvac 3S Plus Scroll Pump with Inlet Valve, Oil-Free Dry Pump, 1-phase, 50/60 Hz, 115 V, 3.5 m3/h, 142030V410Item#: PN41098 Mfr Part#: 142030V410
-
Pfeiffer Adixen ASM 340 D, Helium Leak Detector Dry Version, Universal Voltage 90-240 V, 50/60 Hz, KSBA00A2MM9A, Configurable I/O 37 pins, RS-232 and USB. Like New !Item#: PN17195 Mfr Part#: KSBA00A2MM9APrice upon request
-
Edwards Turbo Station T85 T-Station Dry Turbo Pumping T Station, Includes EXT85DX Turbo Pump (DN 63-ISO), XDD1 Backing Pump, 100-120V, TS85D2002Item#: PN24491 Mfr Part#: TS85D2002
-
Flexible Hose Coupling, Unbraided Vacuum Hose, KF 25 (NW 25), Stainless Steel Vacuum Fitting, 40", 1000mm, PN07714Item#: PN07714 Mfr Part#: KF25FX1000
-
Edwards Turbo Station T85H T-Station Turbo Pumping T Station, Includes EXT85DX Turbo Pump, 100-120 VAC (DN 40-KF), E2M1.5 Vacuum Pump, TS85W1002Item#: PN21267 Mfr Part#: TS85W1002
-
Edwards 3 RV3 Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, Factory set to 115V for USA, Hydrocarbon Oil, A65201906Item#: PN18128 Mfr Part#: A65201906
-
Leybold Turbolab Core 90i Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 63 CF-F), DIVAC 1.4T Diaphragm Pump, 501591V01000500Item#: PN24406 Mfr Part#: 501591V01000500Price upon request
-
Leybold Turbolab Core Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 40 KF), DIVAC 1.4T Diaphragm Pump, 501591V02000500Item#: PN24407 Mfr Part#: 501591V02000500
-
Leybold Turbolab Core 250i Turbo Pumping Station, Includes Turbovac TV250i Turbo Pump (DN 100 ISO-K), DIVAC 1.4T Diaphragm Pump, 501591V08000500Item#: PN24454 Mfr Part#: 501591V08000500
-
Leybold Turbolab Core 250i Turbo Station, Includes Turbovac TV250i Turbo Pump (DN 100 CF-F Conflat), DIVAC 1.4T Diaphragm Pump, 501591V09000500Item#: PN24455 Mfr Part#: 501591V09000500
-
Leybold Turbolab 90i Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 63 ISO-K), DIVAC 3.0T Diaphragm Pump, 501592V00001000Item#: PN24457 Mfr Part#: 501592V02000000
Contact
A&J Vacuum Services
16 Somerset Place,
Clifton, NJ 07012
Clifton, NJ 07012
Customer Service
Phone: 973-249-0854,
Fax: 973-249-0855
Fax: 973-249-0855
Service Hours
8:00am to 5:00pm,
Monday thru Friday EST
Monday thru Friday EST
HELP & FAQ
AJVS Help & Information
High Vacuum Technical Library
@ A&J Vacuum Services, Inc. 2000-2026. All Rights Reserved.
All trademarks, trade names or logons mentioned or used are the property of their respective owners.