Shopping Cart ( )

Edwards MF100AE (MF 100 AE) Oil Mist Filter, A46211000

Condition: Remanufactured
Call us for Availability
Item#:PN18210
Mfr Part#:A46211000
Manufacturer:Edwards Vacuum
PRICE:
$2,410.00
Web savings:
$915.00
YOU PAY:
$1,495.00
Remanufactured Edwards MF100AE (MF 100 AE) Oil Mist Filter, A46211000
Features:
  • PN A46211000
  • Filter Material: Stainless Steel Mesh
  • Inlet Port: NW 25
  • Outlet Port: 1" BSP / NW 25

Edwards MF100AE (MF 100 AE) Oil Mist Filter, A46211000

 

Edwards MF100AE Overview:


The MF100 and MF100AE filters have fine-pore filter elements and a stainless steel wire-mesh filter element inside the steel body. The MF100 and MF100AE have two fine-pore filter elements.

The MF100AE is designed for use with corrosive and toxic gases and vapours. It is leak tested to 1 x 10-4 mbar.ls-1 (1 x 10-2 Pa.ls-1) and the filter elements, sight-glasses and seals are resistant to chemical attack.

The exhaust gases from the pump enter the inlet of the filter and pass down through the filter elements which separate and trap the oil mist.

The exhaust gases then pass through the stainless steel wire mesh element which traps any large droplets of oil carried by the filtered gas. The oil-free exhaust gases are then discharged through the outlet. The trapped oil drains into the base of the body of the mist filter.

The mist filter has a sight-glass so that you can see the level of oil trapped in the mist filter. The sight-glass indicates the maximum level at which the filter operates efficiently.

The sight-glass in the MF100 mist filter is glued in position inside the body of the mist filter. The sightglass in the MF100AE mist filter is secured in position by a bezel and 'O' rings. If necessary, you can replace the sight-glass in the MF100AE.

The body has a drain-valve so that you can drain the trapped oil from the filter.

The spring-loaded pressure-relief valve prevents a dangerous pressure build-up inside the pump and the body if the filter becomes blocked.

  • The MF100 and MF100AE come supplied with two NW25 'C' clamps, NW25 elbow, two NW25 centering rings and 'O' rings, bolts, washers, mounting brackets and studs

Designed to be used with the following Edwards Rotary Vane Vacuum Pumps:

  • E1M40
  • E1M80
  • E2M40
  • E2M80

 


A&J Vacuum Services offers full repair/service of Edwards Dry Scroll Pumps, along with all other brands offered on our website. AJVS also services Edwards pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.

Edwards MF100AE (MF 100 AE) Oil Mist Filter, A46211000

 

Edwards MF100AE Technical Data:


Filter Material: Stainless Steel Mesh
Number of Filter Elements: 2
Inlet Port: NW 25
Outlet Port: 1" BSP

A&J Vacuum Services offers full repair/service of Edwards Dry Scroll Pumps, along with all other brands offered on our website. AJVS also services Edwards pump. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.

Item#:PN07559
Mfr Part#:KF25CLA
Condition: In Stock New
In Stock
$10.25
Get started with your repair: 

We can have a repair estimate ready for your equipment within the hour of submission.

Request a repair estimate

Start your equipment repair process by creating a Service RMA.

Generate Service RMA

High quality service guaranteed

A&J Vacuum Services provides repairs on all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair and Mass Spectrometer repair. Our highly trained technicians will deliver the highest quality service and satisfaction.

We operate at our own full service repair facility which allows us to quickly and economically perform all repairs in a timely manner. Our advandced machinery enables us to handle all facets of the service and repair process. AJVS utilizes industry standard vibration analysis equipment and advanced testing equipment to troubleshoot and minimize all equipment failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.

AJVS repair process:
Repair Steps
  1. Full incoming inspection and run up time check, vibration check, drive inspection.
  2. Full disassembly of the pump, decontamination and cleaning.
  3. Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
  4. Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and log pump life.
  5. Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10 -Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
We can repair your:
 
  • Turbo Pumps
  • Rotary Vane Pumps
  • Dry Vacuum Pumps
  • Leak Detectors
  • Scroll Dry Pumps
  • Vacuum Boosters
  • Diaphragm Dry Pumps
Deals & Promotions
Contact
A&J Vacuum Services 16 Somerset Place,
Clifton, NJ 07012
Customer Service Phone: 973-249-0854,
Fax: 973-249-0855
Service Hours 8:00am to 5:00pm,
Monday thru Friday EST
@ A&J Vacuum Services, Inc. 2000-2026. All Rights Reserved.
All trademarks, trade names or logons mentioned or used are the property of their respective owners.