Edwards TIC Instrument Controller 200W, RS232/485, With Support of Turbo Pump and 3 Active Vacuum Gauges, D39722000

Edwards TIC Instrument Controller 200W, RS232/485, With Support of Turbo Pump and 3 Active Vacuum Gauges, D39722000

Edwards TIC Instrument Controller 200W Features:

• TIC software is structured through a series of easily accessible screens, similar to a mobile telephone.
• Supports 1 Turbo Pump (EXT75DX / nEXT85 / nEXT240 / nEXT300 / nEXT400)
• TIC automatically recognizes which turbo is connected and displays the appropriate information on the default summary screen. Scrolling and selecting accesses the control and set-up menus for that item.
• Edwards Turbo speed is shown as a proportion of full speed by a bar graph. ‘Norm’ indicates that the turbo has reached its Normal Speed, whilst forward or reverse facing chevrons indicate acceleration and deceleration.
• Instrument supporting TIC variants recognize and control the following gauges: APG, APGX, ATC, ASG, AIM, WRG & AIGX.  No more than one AIGX gauge may be connected to TIC at a time.
• Backing pump 24 V (For mains backing pump support, see below.)
  200 W turbo supporting TIC variants recognize and control the following 24 V backing pumps: XDD1
• Relay box (optional)
  A range of relay boxes has been developed to allow TIC to operate three 250 V a.c. 3 A (non-inductive) changeover relays, mains backing pumps and accessories.
• The changeover relays are activated by the TIC set point outputs. The mains backing pump relay controls a backing line isolation valve, such that when the backing pump is switched off the isolation valve closes.
  The relay box is connected to the TIC via the logic interface connector, which is also provided with a bypass connector for interfacing with OEM equipment.
• Pumps status is displayed, giving a clear indication of what is currently happening in the vacuum system.
• In the event of an error occurring, Edwards TIC will display either a WARNING or flash an ALARM. A warning advises of a condition outside normal parameters, requiring no action, but an alarm must be cleared before normal operation may resume.​

TIC Instrument Controller 200W / D39722000 Overview:

The Edwards compact turbo controller with a large clear graphical display, an intuitive user interface and serial communications providing full remote control and data logging functions via a new Windows™ based PC program. The controller automatically recognizes and supports one 24 V turbomolecular pump from the EXT/nEXT range.

Edwards Turbo Pump cooling and vent valve support is provided directly from the controller. Mains backing pumps (up to nXDS20i/RV12) may be controlled via an optional relay box. 2 different power variants are available, 100W or 200W which determines the ramp speed of the turbo pump.

In addition 200W models have the ability to power a 24Vdc backing pump such as our XDD1 or nXDS through a 15-way D. Turbo and instrument models add the ability to control up to 3 of our range of Active gauges (excluding IGC & Barocels).

Relay box options

• TIC Relay Box Instruments
• Changeover relays (3 off 250 V a.c. 3 A)
• TIC Relay Box Small Backing pump
• Heater band & backing line isolation valve
• Small backing pump
• TIC Relay Box Inst & Small Backing pump
• Changeover relays (3 off 250 V a.c. 3 A)
• Heater band & backing line isolation valve
• Small backing pump
• Compatible mains backing pumps and accessories
  • Small backing pumps: E2M0.7 & 1.5, RV3, 5, 8 & 12, XDS5C & 10C, XDS5 & 10 & ESDP12
  • Heater band: BX70 & BX250
  • Backing line isolation valve: LCPV16EKA & LCPV25EKA

A&J Vacuum services and repairs Edwards Tic Instrument, along with all other Edwards Controller and Turbo Pumps available on our website. Please contact us for additional information concerning our service program or click http://www.ajvs.com/service.php to access our Services page. We likewise offer emergency service and repair upon request. For more information, please contact A&J Vacuum Services at (973) 249-0854. Thank you for choosing AJVS as your supplier.