Pfeiffer Vacuum
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Scroll Dry Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
- Quartz Capillary
- 100 – 240 V AC, 50/60 Hz
- Mass Range: 1 - 300 u
- Gas Connection Length: 2 m | 79 in
Pfeiffer ThermoStar GSD 350 T3, 1 - 300 u, Yttrium Iridium Cathode, Heated Capillary 200 °C, 1A, PT Q90 211 230 / PTQ90211230
Pfeiffer ThermoStar GSD 350 T3 Features:
- Analyzes multiple gas components simultaneously
- Ethernet interface type
- Gas connection length of 2 m | 79 in
ThermoStar GSD 350 T3 / PTQ90211230 Overview:
The Pfeiffer GSD 350 is capable of simultaneously analyzing multiple gas components. Before entering the PrismaPro, the sample gas passes through a pressure-reduction stage to ensure proper operating conditions in the vacuum environment. Within the PrismaPro, a portion of the gas is ionized, and the resulting ions are separated and detected according to their respective mass-to-charge ratios.
Two GSD350 configurations are available, each featuring a different gas inlet system (OmniStar or ThermoStar). The inlet system reduces the sample gas pressure from 1000 hPa to the working pressure required by the PrismaPro. Both versions share the same gas analysis unit as well as the high-vacuum and gas-handling system.
ThermoStarGSD350T3 Scope of Delivery:
- GSD 350 OmniStar/ThermoStar
- Installation hardware and small parts
- Allen key, WAF 2, WAF 2.5 AND WAF 3
- Metric open-end wrench, WAF 8, WAF 10 (2x) and WAF 14
- Imperial open-end wrench, WAF 5/16", WAF 3/8" and WAF 9/16"
- Two-sided socket key for the ion source
- Special tool for the orifice of the gas inlet system
- 2 O-rings made of FKM, 9.25 × 1.78 mm and 18.77 × 1.78 mm
- 2 slow fuses, 10 A
- For OmniStar with stainless steel capillary only
- Hexagon socket wrench, TX20
- Clamp collar set for 1/16" tube (5 pieces)
- For ThermoStar or GSD 350 with quartz capillary only
- Sealing set for capillary 250 µm (ferrule) (5 pieces)
- Transport protection for analyzer QMA 250 M
- Assembly aid for analyzer QMA 250
- Ethernet cable, 3 m length, red
- Mains Cable
- Operating instructions
- GSD 350 OmniStar/ThermoStar
- Components
ThermoStarGSD350T3 Applications:
- Battery
- Degassing
- Recycling
- Carbon Capture
- Amine Scrubbing
- Membrane Capture
- Moving Bed Process
- Pressure Swing Adsorption
- Direct Air Capture
- Pharmaceutical Industry
- Laboratory Vacuum
- R&D
- Laboratory Vacuum
- Scientific Instruments
- Surface Analysis
A&J Vacuum repair / rebuild and service Leak Detectors & Mass Spectrometers and all other Pfeiffer equipment available on our site. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Pfeiffer ThermoStar GSD 350 T3, 1 - 300 u, Yttrium Iridium Cathode, Heated Capillary 200 °C, 1A, PT Q90 211 230 / PTQ90211230
Pfeiffer ThermoStar GSD 350 T3 Technical Data:
| Ambient temperature | 10 – 40 °C | 50 – 104 °F | 283.15 – 313.15 K |
| Calibration device | No |
| Capillary, material | Quartz |
| Contribution to neighboring mass: 40 to 41 | < 50 ppm |
| Corrosive gas version | No |
| Detection limit min.: C-SEM (ppm) | < 10 ppm |
| Exhaust connection | IQS plug-in connection, 6 mm | 0.24 in |
| Exhaust pressure, max. | Atmospheric pressure |
| Filament | Iridium coated with Y2O3 |
| Gas connection | Capillary, AD 0.23 mm | 0.01 in |
| Gas connection: Length | 2 m | 0.1 in |
| Gas flow rate | 1 – 2 sccm (0 °C) | 33.8 – 35.6 °F | 274.15 – 275.15 K |
| Gas inlet | Continuously open |
| Grain size limit (separable) | 1 µm |
| Inlet pressure max. | 1200 hPa | 900 Torr | 1,200 mbar |
| Input voltage(s) | 100 – 240 V AC, 50/60 Hz |
| Input: Analog | 5 x, -10 – +10 V / 14 Bit | 16 Bit |
| Input: Digital | 4 x nominal + 24 V |
| Interface: Type | Ethernet |
| Mains frequency compatibility | 50 Hz 60 Hz |
| Mass range | 1 - 300 u |
| Materials in contact with media | Ceramic Stainless steel Copper Nickel Molybdenum Gold Glass FKM PTFE Platinum/iridium Aluminum Silver NBR |
| Number of filaments | 2 |
| Operating altitude, max. | 2000 m |
| Operating site | Indoor, weatherproof |
| Operating temperature: capillary, up to | 200 °C | 392 °F | 473.15 K |
| Output: Analog | 4 x, 0 – 10 V, Imax = 10 mA, 16 bit |
| Output: Digital | 6 x open collector, nominal + 24 V, Imax = 200 mA |
| Power consumption | 830 W |
| Protection degree | IP30 |
| Recommended on-site electric fuse protection | 10 A |
| Relay: Number | 2 pcs. |
| Relay: Switching current | 1 A |
| Relay: Switching voltage | 24 V DC |
| System controller | Color 7" touch display or via web interface |
A&J Vacuum repair / rebuild and service Leak Detectors & Mass Spectrometers and all other Pfeiffer equipment available on our site. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Pfeiffer ThermoStar GSD 350 T3 Data Sheet PTQ90211230 
|
Service and Repair - Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Overview
Pfeiffer ThermoStar GSD 350 T3, 1 - 300 u, Yttrium Iridium Cathode, Heated Capillary 200 °C, 1A, PT Q90 211 230 / PTQ90211230
Pfeiffer ThermoStar GSD 350 T3 Features:
- Analyzes multiple gas components simultaneously
- Ethernet interface type
- Gas connection length of 2 m | 79 in
ThermoStar GSD 350 T3 / PTQ90211230 Overview:
The Pfeiffer GSD 350 is capable of simultaneously analyzing multiple gas components. Before entering the PrismaPro, the sample gas passes through a pressure-reduction stage to ensure proper operating conditions in the vacuum environment. Within the PrismaPro, a portion of the gas is ionized, and the resulting ions are separated and detected according to their respective mass-to-charge ratios.
Two GSD350 configurations are available, each featuring a different gas inlet system (OmniStar or ThermoStar). The inlet system reduces the sample gas pressure from 1000 hPa to the working pressure required by the PrismaPro. Both versions share the same gas analysis unit as well as the high-vacuum and gas-handling system.
ThermoStarGSD350T3 Scope of Delivery:
- GSD 350 OmniStar/ThermoStar
- Installation hardware and small parts
- Allen key, WAF 2, WAF 2.5 AND WAF 3
- Metric open-end wrench, WAF 8, WAF 10 (2x) and WAF 14
- Imperial open-end wrench, WAF 5/16", WAF 3/8" and WAF 9/16"
- Two-sided socket key for the ion source
- Special tool for the orifice of the gas inlet system
- 2 O-rings made of FKM, 9.25 × 1.78 mm and 18.77 × 1.78 mm
- 2 slow fuses, 10 A
- For OmniStar with stainless steel capillary only
- Hexagon socket wrench, TX20
- Clamp collar set for 1/16" tube (5 pieces)
- For ThermoStar or GSD 350 with quartz capillary only
- Sealing set for capillary 250 µm (ferrule) (5 pieces)
- Transport protection for analyzer QMA 250 M
- Assembly aid for analyzer QMA 250
- Ethernet cable, 3 m length, red
- Mains Cable
- Operating instructions
- GSD 350 OmniStar/ThermoStar
- Components
ThermoStarGSD350T3 Applications:
- Battery
- Degassing
- Recycling
- Carbon Capture
- Amine Scrubbing
- Membrane Capture
- Moving Bed Process
- Pressure Swing Adsorption
- Direct Air Capture
- Pharmaceutical Industry
- Laboratory Vacuum
- R&D
- Laboratory Vacuum
- Scientific Instruments
- Surface Analysis
A&J Vacuum repair / rebuild and service Leak Detectors & Mass Spectrometers and all other Pfeiffer equipment available on our site. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Specifications
Pfeiffer ThermoStar GSD 350 T3, 1 - 300 u, Yttrium Iridium Cathode, Heated Capillary 200 °C, 1A, PT Q90 211 230 / PTQ90211230
Pfeiffer ThermoStar GSD 350 T3 Technical Data:
| Ambient temperature | 10 – 40 °C | 50 – 104 °F | 283.15 – 313.15 K |
| Calibration device | No |
| Capillary, material | Quartz |
| Contribution to neighboring mass: 40 to 41 | < 50 ppm |
| Corrosive gas version | No |
| Detection limit min.: C-SEM (ppm) | < 10 ppm |
| Exhaust connection | IQS plug-in connection, 6 mm | 0.24 in |
| Exhaust pressure, max. | Atmospheric pressure |
| Filament | Iridium coated with Y2O3 |
| Gas connection | Capillary, AD 0.23 mm | 0.01 in |
| Gas connection: Length | 2 m | 0.1 in |
| Gas flow rate | 1 – 2 sccm (0 °C) | 33.8 – 35.6 °F | 274.15 – 275.15 K |
| Gas inlet | Continuously open |
| Grain size limit (separable) | 1 µm |
| Inlet pressure max. | 1200 hPa | 900 Torr | 1,200 mbar |
| Input voltage(s) | 100 – 240 V AC, 50/60 Hz |
| Input: Analog | 5 x, -10 – +10 V / 14 Bit | 16 Bit |
| Input: Digital | 4 x nominal + 24 V |
| Interface: Type | Ethernet |
| Mains frequency compatibility | 50 Hz 60 Hz |
| Mass range | 1 - 300 u |
| Materials in contact with media | Ceramic Stainless steel Copper Nickel Molybdenum Gold Glass FKM PTFE Platinum/iridium Aluminum Silver NBR |
| Number of filaments | 2 |
| Operating altitude, max. | 2000 m |
| Operating site | Indoor, weatherproof |
| Operating temperature: capillary, up to | 200 °C | 392 °F | 473.15 K |
| Output: Analog | 4 x, 0 – 10 V, Imax = 10 mA, 16 bit |
| Output: Digital | 6 x open collector, nominal + 24 V, Imax = 200 mA |
| Power consumption | 830 W |
| Protection degree | IP30 |
| Recommended on-site electric fuse protection | 10 A |
| Relay: Number | 2 pcs. |
| Relay: Switching current | 1 A |
| Relay: Switching voltage | 24 V DC |
| System controller | Color 7" touch display or via web interface |
A&J Vacuum repair / rebuild and service Leak Detectors & Mass Spectrometers and all other Pfeiffer equipment available on our site. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Service & Repair
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
