Stainless Steel ring with NBR O-ring
Overview:
The Centering Rings are available in the following sizes: NW 10, NW 16, NW 25, NW 40, NW 50.
The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.
The centering ring contains a rubber elastomer Buna-N o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50
Standard sizes for quick flange fittings are KF-10, KF-16, KF-25 and KF-50 with Flange sizes NW-10, NW16, NW-25, NW-40
KF (also referred to as NW) assemblies consist of two Flanges, a Center NBR O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Corrosive resistant stainless steel (316) with Buna-N O-ring provides great resistance to heat and agressive chemicals.
Stainless Steel ring with NBR O-ring
Overview:
The Centering Rings are available in the following sizes: NW 10, NW 16, NW 25, NW 40, NW 50.
The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.
The centering ring contains a rubber elastomer Buna-N o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50
Standard sizes for quick flange fittings are KF-10, KF-16, KF-25 and KF-50 with Flange sizes NW-10, NW16, NW-25, NW-40
KF (also referred to as NW) assemblies consist of two Flanges, a Center NBR O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Corrosive resistant stainless steel (316) with Buna-N O-ring provides great resistance to heat and agressive chemicals.
Stainless Steel ring with NBR O-ring
Overview:
The Centering Rings are available in the following sizes: NW 10, NW 16, NW 25, NW 40, NW 50.
The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.
The centering ring contains a rubber elastomer Buna-N o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50
Standard sizes for quick flange fittings are KF-10, KF-16, KF-25 and KF-50 with Flange sizes NW-10, NW16, NW-25, NW-40
KF (also referred to as NW) assemblies consist of two Flanges, a Center NBR O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Corrosive resistant stainless steel (316) with Buna-N O-ring provides great resistance to heat and agressive chemicals.
Stainless Steel ring with NBR O-ring
Overview:
The Centering Rings are available in the following sizes: NW 10, NW 16, NW 25, NW 40, NW 50.
The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.
The centering ring contains a rubber elastomer Buna-N o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50
Standard sizes for quick flange fittings are KF-10, KF-16, KF-25 and KF-50 with Flange sizes NW-10, NW16, NW-25, NW-40
KF (also referred to as NW) assemblies consist of two Flanges, a Center NBR O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Corrosive resistant stainless steel (316) with Buna-N O-ring provides great resistance to heat and agressive chemicals.
Centering Ring Adapter KF-10 to KF-16, NW10/16, With Nitrile O-Ring Stainless Steel, KF10/16, PN40709 / C10512346
NW10 to NW16 O-ring Adapter Overview:
These adapting rings are used to addopt NW10 to NW16 flanges Edwards C10512346
The centering ring contains a rubber Nitrile o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50
Stainless Steel ring with NBR O-ring
Overview:
The Centering Rings are available in the following sizes: NW 10, NW 16, NW 25, NW 40, NW 50.
The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.
The centering ring contains a rubber elastomer Buna-N o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50
Standard sizes for quick flange fittings are KF-10, KF-16, KF-25 and KF-50 with Flange sizes NW-10, NW16, NW-25, NW-40
KF (also referred to as NW) assemblies consist of two Flanges, a Center NBR O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Corrosive resistant stainless steel (316) with Buna-N O-ring provides great resistance to heat and agressive chemicals.