- Pumping Speed L/min 50 (50Hz)
- Ultimate Pressure: < 20 Pa (50Hz) / < 15 Pa (60Hz)
- Inlet Connection: NW 25
- Air Cooled
Shopping Cart ( )
Anest Iwata ISP-50 Dry Scroll Vacuum Pump, Vertical Inlet, Single Phase Motor
Condition:
New
Item#:PN15277
Mfr Part#:ISP-50
Manufacturer:Anest Iwata
Features:
Anest Iwata ISP-50 Dry Scroll Vacuum Pump, Vertical Inlet, Single Phase Motor
Anest Iwata ISP-50 Features:
- Energy efficient
- Quiet
- Low vibration
- Longer maintenance cycle
ISP-50 / Overview:
The Anest Iwata ISP-50 Dry Scroll Pumps offer a clean dry vacuum enviroment and elimates the nuisance of cumbersome lubricant maintenance or sealing water administration.
The ISP-50 Dry Pump is free from installation restrictions because of its air-cooled system, and does not require water cooling. The air cooling system eliminates the need for the burdensome job of maintaining cooling water and allows the pump to be installed in place where it was formerly difficult to install.
The ISP Series pumps are oil-free, solving many issues with contamination and maintenance problems. The ISP Vacuum Pumps are used by many customers in a wide range of applications from cutting-edge industries in the filed of physical and chemical science to general purpose uses.
Pumping humid gases can cause condensed moisture to remain in the pump. In order to extend the life of the pump, we utilized the Air Flush System to remove any moisture. The ISP-50 Scroll Vacuum Pump is equipped with Air Flush Port, which pumps out the remaining moisture left over from pumping humid gases and maintains the ultimate pressure.
Anest Iwata ISP-50 series vacuum pumps maintain low power consumption from atmosphere to maximum pressure.
The ISP-50 Vacuum Pump should be used at ambient operation temperature in the range of 5ºC to 40ºC.
This pumping system is suitable for clean processes only. Do not use explosive, flammable, toxic or corrosive substances or substances which contain chemicals, solvents or particles.
ISP50 Applications:
- Sputtering Equipment, Vacuum Depostition Equipment, Ion Plating Equipment
- Electron Microscope
- Uses scattered electrons and transmitted
- Mass Spectrometry
- Measures the mass of a molecule. Utilizes vacuum to convert the molecule to a gas-phase ion.
- Sputtering
- Involves ejecting material from a source target onto a substrate.
- Evaporation Deposition
- Coating source material is evaporated in a vacuum.
- Vacuum Sterilizer
- Utilizes a series of sterilizing gas injections and evacuations with a vacuum system.
- Vacuum Freeze Drying
- Pressure is lowered to create ice sublimation. Vacuum speeds up the sublimation.
- Cryogenics
- Vacuum pumps are used in conjunction with Cryo pumps for chamber evacuation and gas regeneration.
- Vacuum Heat Treatment
- Preventing oxidation and removing absorbed gases for heat treatment under vacuum.
- Accelerator, Synchrotron Radiation
- Vacuum is required to keep electrons and photons from being slowed down by colliding with atoms and molecules.
- Surface Modification, Electron Beam Process
- Gas Recovery Devices
- Vacuum Equipment
- Leak Detectors
- Checking leakage by measuring pressure change overtime while under vacuum.
- Device Handling System
- Vacuum Furnace, Heat Treatment Furnace
- Laboratory Use
- Vacuum Packaging Machine
A&J Vacuum Services, Inc is Anest Iwata authorized repair / rebuild and service center for all Scroll Dry Vacuum Pumps along with all other. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
This item is non-returnable/non-refundable
Anest Iwata ISP-50 Dry Scroll Vacuum Pump, Vertical Inlet, Single Phase Motor
Anest Iwata ISP-50 Technical Data:
A&J Vacuum Services, Inc is Anest Iwata authorized repair / rebuild and service center for all Scroll Dry Vacuum Pumps along with all other. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Item#:PN22626
Mfr Part#:98888240
Condition: In Stock
New
In Stock
$1,246.00
Item#:PN22627
Mfr Part#:98887240
Condition: Ships Within 1-3 Days
New
$602.00
Item#:PN22628
Mfr Part#:98891230
Condition: In Stock
New
In Stock
$589.00
Item#:PN22629
Mfr Part#:98889230
Condition: Ships Within 1-3 Days
New
$610.00
Item#:PN22630
Mfr Part#:98890230
Condition: Ships Within 1-3 Days
New
$465.00
Item#:PN22641
Mfr Part#:98884980
Condition: Ships Within 1-3 Days
New
$1,525.00
Item#:PN22631
Mfr Part#:98888230
Condition: Ships Within 1-3 Days
New
$256.00
Item#:PN22632
Mfr Part#:98889270
Condition: Ships Within 1-3 Days
New
$91.00
Item#:PN22633
Mfr Part#:98886240
Condition: Ships Within 1-3 Days
New
$249.00
Item#:PN22638
Mfr Part#:98812852
Condition: Ships Within 1-3 Days
New
$954.00
Item#:PN22639
Mfr Part#:98813852
Condition: Ships Within 1-3 Days
New
$930.00
Item#:PN22640
Mfr Part#:97450063
Condition: Ships Within 1-3 Days
New
$251.00
Get started with your repair:
We can have a repair estimate ready for your equipment within the hour of submission.
Start your equipment repair process by creating a Service RMA.
High quality service guaranteed
A&J Vacuum Services provides repairs on all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair and Mass Spectrometer repair. Our highly trained technicians will deliver the highest quality service and satisfaction.
We operate at our own full service repair facility which allows us to quickly and economically perform all repairs in a timely manner. Our advandced machinery enables us to handle all facets of the service and repair process. AJVS utilizes industry standard vibration analysis equipment and advanced testing equipment to troubleshoot and minimize all equipment failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
AJVS repair process:
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly of the pump, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and log pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10 -Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
We can repair your:
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
Deals & Promotions
-
Edwards ELD500 Wet Portable Leak Detector With Integral Oil Sealed Rotary Vane Pump, 100-120V 60Hz, D13510906 ELD 500Item#: PN23588 Mfr Part#: D13510906
-
Pfeiffer HiScroll 6 Dry Scroll Pump with Manual Gas Ballast, 3.59 cfm, 100 - 127 V, 200 - 240 VAC, Single Phase, 50/60 HZ, ATEX, 2000026552 / PD S10 000 B / PDS10000BItem#: PN23774 Mfr Part#: 2000026552 / PD S10 000 B / PDS10000B
-
Leybold Scrollvac 3 Plus Scroll Pump, Oil-Free Dry Pump, 1-phase, 50/60 Hz, 115 V, 3.5 m3/h, 142030V310Item#: PN41078 Mfr Part#: 142030V310
-
Leybold Turbolab Core 90i Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 63 ISO-K), DIVAC 1.4T Diaphragm Pump, 501591V00000500Item#: PN24393 Mfr Part#: 501591V00000500
-
Pfeiffer HiScroll 18 Dry Scroll Pump, with Manual Gas Ballast, Pressure Sensor Included, 10.65 cfm, 100 - 127 V, 200 - 240 VAC, Single Phase, 50/60 HZ, 2000026597 / PDS30010B / PD S30 010 BItem#: PN23779 Mfr Part#: 2000026597 / PDS30010B / PD S30 010 B
-
Edwards nXDS6iC Dry Scroll Vacuum Pump, Corrosive, 3.6 CFM / 100 - 127 V, 200 - 240 V, Single Phase, 50/60 Hz, A73502983Item#: PN15783 Mfr Part#: A73502983Price upon request
-
Pfeiffer HiCube 300 Eco Turbo Pumping Station, Includes HiPace 300 Turbo Pump ISO 100, MVP 030-3 DC Diaphragm Vacuum Pump and DCU 002 Control Unit, 100-240 V 50/60 Hz, PMS7620000 / PM 025 019 AT / PM025019ATItem#: PN20408 Mfr Part#: PMS7620000 / PM 025 019 AT / PM025019AT
-
Edwards EMF 20 Oil Mist Exhaust Filter, Includes Mist Element and Odor Element, A46229000Item#: PN00844 Mfr Part#: A46229000
-
Pfeiffer ASM 390 Mobile Helium Leak Detector with ACP 40 Dry Scroll Pump and SplitFlow 80, ASM390, 2000034669 / CSGB01G2MM9AItem#: PN22455 Mfr Part#: 2000034669 / CSGB01G2MM9A
-
Leybold Scrollvac 3S Plus Scroll Pump, with Inlet Valve, Oil-Free, 1-phase, 50/60 Hz, 115 V, 3.5 m3/h, 142030V410Item#: PN41098 Mfr Part#: 142030V410
-
Edwards Turbo Station T85 T-Station Dry Turbo Pumping T Station, Includes EXT85DX Turbo Pump (DN 63-ISO), XDD1 Backing Pump, 100-120V, TS85D2002Item#: PN24491 Mfr Part#: TS85D2002
-
Flexible Hose Coupling, Unbraided Vacuum Hose, KF 25 (NW 25), Stainless Steel Vacuum Fitting, 40", 1000mm, PN07714Item#: PN07714 Mfr Part#: KF25FX1000
-
Edwards Turbo Station T85H T-Station Turbo Pumping T Station, Includes EXT85DX Turbo Pump, 100-120 VAC (DN 40-KF), E2M1.5 Vacuum Pump, TS85W1002Item#: PN21267 Mfr Part#: TS85W1002
-
Edwards RV3 Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, Factory Set to 115V for USA, Hydrocarbon Oil, A65201906Item#: PN18128 Mfr Part#: A65201906
-
Leybold Turbolab Core 90i Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 63 CF-F), DIVAC 1.4T Diaphragm Pump, 501591V01000500Item#: PN24406 Mfr Part#: 501591V01000500
-
Leybold Turbolab Core Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 40 KF), DIVAC 1.4T Diaphragm Pump, 501591V02000500Item#: PN24407 Mfr Part#: 501591V02000500
-
Leybold Turbolab Core 250i Turbo Pumping Station, Includes Turbovac TV250i Turbo Pump (DN 100 ISO-K), DIVAC 1.4T Diaphragm Pump, 501591V08000500Item#: PN24454 Mfr Part#: 501591V08000500
-
Leybold Turbolab Core 250i Turbo Station, Includes Turbovac TV250i Turbo Pump (DN 100 CF-F Conflat), DIVAC 1.4T Diaphragm Pump, 501591V09000500Item#: PN24455 Mfr Part#: 501591V09000500
-
Leybold Turbolab 90i Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 63 ISO-K), DIVAC 3.0T Diaphragm Pump, 501592V00001000Item#: PN24457 Mfr Part#: 501592V02000000
Contact
A&J Vacuum Services
16 Somerset Place,
Clifton, NJ 07012
Clifton, NJ 07012
Customer Service
Phone: 973-249-0854,
Fax: 973-249-0855
Fax: 973-249-0855
Service Hours
8:00am to 5:00pm,
Monday thru Friday EST
Monday thru Friday EST
HELP & FAQ
AJVS Help & Information
High Vacuum Technical Library
@ A&J Vacuum Services, Inc. 2000-2026. All Rights Reserved.
All trademarks, trade names or logons mentioned or used are the property of their respective owners.