New Leybold Scrollvac 7 Plus dry vacuum pumps are produced to operate in a broad spectrum of applications - general laboratory, research, General vacuum pumping applications, Mass Spectomerty, Backing turbo pumps, Research and development and many more other vacuum applications. Pumping Speed 6.1 m3/h , 3.6 cfm
Each of the available Leybold ScrollVac pump models (Scrollvac 7 Plus, 10 Plus, 15 Plus, and 18 Plus) consists of two spiral forms - one moves in an orbiting motion relative to the other, fixed spiral which provides the ultimate vacuum performance. This eccentric design allows several crescent-shaped volumes to be generated. During this process, the volumes are driven from the outside to the inside of the spirals resulting in gas compression. Leybold ScrollVac 7 is known as very quiet scroll pump. The Leybold ScrollVac is now equipped with the latest technology with a universal voltage power supply for implementation throuthout entire world within voltage range from 100-127 VAC / 200-240VAC 50/60 Hz. The Leybold ScrollVac 7 Plus pumps are truly dry vacuum pumps as all the internal bearings, with their hydrocarbon lubricant, are isolated from the vacuum space. The body of the Leybold ScrollVac pump includes a fixed scroll and an orbiting scroll. The orbiting scroll design is controlled by an electric motor through an eccentric crank on the main motor drive shaft. Gas that enters through the inlet of Leybold ScrollVac 7 pump is compressed by the movement of the orbiting scroll design and moved towards the center of the fixed scroll. The compressed
gas enters the exhaust port near the center of the fixed scroll and is exhausted from the ScrollVac 7 pump through the outlet port. The Leybold ScrollVac 1 Phase pump is equipped with the lattest technology Scroll Pump controller. The Leybold ScrollVac 7 1-phase integrated pump controller manages the supply of current to an embedded 3-phase internal electric motor in accordance with operating conditions.
The Leybold ScrollVac 1-phase scroll pump controller nominally supplies the motor with a 60 Hz frequency. The ScrollVac pump controller monitors power, temperature, and will
protect the pump in the event of operation under sustained high load or under fault conditions. The controller provides the user interface.
The Leybold ScrolVac 7 pump may be operated in these modes:
The Leybold ScrollVac can be operated via Logic Interface. The ScrollVac pump controller can be operated via the 15-pin D-SUB digital I/O connector. The signals on the logic interface are of the following types:
The Leybold ScrollVac 7 pump can be operated manualy using interface panel buttons which includes unique Standby mode that reduces pump speed to 70% of full speed to extend lifetime of the tipseals and liftime of all internal bearings.
The Leybold ScrollVac 7 features Gas ballast control to pump high vapour loads, gas ballast can be delivered into the pump to prevent condensation of the vapour carried by the pumped gases. Air can be introduced to the low vacuum stages through the gas ballast control (Manual Figure 1, item 3). Alternatively, an inert gas such as nitrogen can be supplied through a suitable external valve and by using the appropriate adaptor,
available as an accessory. All surfaces of the Leybold ScrollVac 7 pump which are exposed to the pumped gases are free from copper, zinc and cadmium. Exposed components include: anodised, aluminium scrolls, aluminium housing, nickel-plated inlet and exhaust ports, PTFE composite tip-seals, various stainless steel parts and fluorocarbon elastomer seals. Other materials of construction not exposed to vacuum include steel, copper, hydrocarbon lubricant and chemically resistant polymers.
Click Here to view Leybold Scrollvac Operating Manual
Click Here to view Leybold ScrollVac Pump Series Broshure
Click Here to watch Leybold SCROLLVAC plus Family Video
A&J Vacuum repair / rebuild and service all Leybold Scrollvac Vacuum Pumps (7 Plus 141007V10) along with Leybold Scrollvac 1-Phase Vacuum Pumps and other Vacuum Pumps, Leybold Helium Leak Detectors, along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
This new Leybold Scrollvac 10 Plus dry vacuum pumps are produced to operate in a broad spectrum of applications - general laboratory, research, General vacuum pumping applications, Mass Spectomerty, Backing turbo pumps, Research and development and many more other vacuum applications. Pumping Speed 10.6 m3/h , 6.2 cfm
Each of the available Leybold ScrollVac 10 pump models (Scrollvac 7 Plus, 10 Plus, 15 Plus, and 18 Plus) consists of two spiral forms - one moves in an orbiting motion relative to the other, fixed spiral which provides the ultimate vacuum performance. This eccentric design allows several crescent-shaped volumes to be generated. During this process, the volumes are driven from the outside to the inside of the spirals resulting in gas compression. Leybold ScrollVac 10 is known as a very quiet scroll pump. The Leybold ScrollVac is now equipped with the latest technology with a universal voltage power supply for implementation throuthout entire world within voltage range from 100-127 VAC / 200-240VAC 50/60 Hz. The Leybold ScrollVac 10 Plus pumps are truly dry vacuum pumps as all the internal bearings, with their hydrocarbon lubricant, are isolated from the vacuum space. The body of the Leybold ScrollVac pump includes a fixed scroll and an orbiting scroll. The orbiting scroll design is controlled by an electric motor through an eccentric crank on the main motor drive shaft. Gas that enters through the inlet of Leybold ScrollVac 10 pump is compressed by the movement of the orbiting scroll design and moved towards the center of the fixed scroll.
The compressed gas enters the exhaust port near the center of the fixed scroll and is exhausted from the ScrollVac 10 pump through the outlet port. The pump is equiped with customer interface, electric terminal box and an embedded 3-phase electric motor. The electric terminal box provides a method for connecting and configuring the 3-phase supply to the embedded 3-phase motor. The user interface provided by the terminam box consists of :
The Leybold ScrollVac 10 3-phase scroll pump is intially adjusted for high voltage usage, i.e. 380-415 V 50 Hz, and 460 V 60Hz. The flanges of the 3-phase pump are closed, and the power cable is not supplied.
The Leybold ScrollVac 10 features Gas ballast control to pump high vapour loads, gas ballast can be delivered into the pump to prevent condensation of the vapour carried by the pumped gases. Air can be introduced to the low vacuum stages through the gas ballast control (Manual Figure 1, item 3). Alternatively, an inert gas such as nitrogen can be supplied through a suitable external valve and by using the appropriate adaptor,
available as an accessory. All surfaces of the Leybold ScrollVac 10 pump which are exposed to the pumped gases are free from copper, zinc and cadmium. Exposed components include: anodised, aluminium scrolls, aluminium housing, nickel-plated inlet and exhaust ports, PTFE composite tip-seals, various stainless steel parts and fluorocarbon elastomer seals. Other materials of construction not exposed to vacuum include steel, copper, hydrocarbon lubricant and chemically resistant polymers.
Click Here to view Leybold Scrollvac Operating Manual
Click Here to view Leybold ScrollVac Pump Series Broshure
Click Here to watch Leybold SCROLLVAC plus Family Video
A&J Vacuum repair / rebuild and service all Leybold Scrollvac 1-Phase Vacuum Pumps (10 Plus 141010V10) along with Leybold Scrollvac 1-Phase Vacuum Pumps and other Vacuum Pumps, Leybold Helium Leak Detectors, along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
This new Leybold Scrollvac 15 Plus dry vacuum pumps are produced to operate in a broad spectrum of applications - general laboratory, research, General vacuum pumping applications, Mass Spectomerty, Backing turbo pumps, Research and development and many more other vacuum applications. Pumping Speed 14.5 m3/h, 8.5 cfm
Each of the available Leybold ScrollVac pump models (Scrollvac 7 Plus, 10 Plus, 15 Plus, and 18 Plus) consist of two spiral forms - one moves in an orbiting motion relative to the other, fixed spiral which provides the ultimate vacuum performance. This eccentric design allows several crescent-shaped volumes to be generated. During this process, the volumes are driven from the outside to the inside of the spirals resulting in gas compression. Leybold ScrollVac 15 is known as a very quiet scroll pump. The Leybold ScrollVac is now equipped with the latest technology with a universal voltage power supply for implementation throuthout entire world within voltage range from 100-127 VAC / 200-240VAC 50/60 Hz. The Leybold ScrollVac 15 Plus pumps are truly dry vacuum pumps as all the internal bearings, with their hydrocarbon lubricant, are isolated from the vacuum space. The body of the Leybold ScrollVac pump includes a fixed scroll and an orbiting scroll. The orbiting scroll design is controlled by an electric motor through an eccentric crank on the main motor drive shaft. Gas that enters through the inlet of Leybold ScrollVac 15 pump is compressed by the movement of the orbiting scroll design and moved towards the center of the fixed scroll.
The compressed gas enters the exhaust port near the center of the fixed scroll and is exhausted from the ScrollVac 15 pump through the outlet port. The pump is equiped with customer interface, electric terminal box and an embedded 3-phase electric motor. The electric terminal box provides a method for connecting and configuring the 3-phase supply to the embedded 3-phase motor. The user interface provided by the terminam box consists of :
The Leybold ScrollVac 15 3-phase scroll pump is intially adjusted for high voltage usage, i.e. 380-415 V 50 Hz, and 460 V 60Hz. The flanges of the 3-phase pump are closed, and the power cable is not supplied.
The Leybold ScrollVac 15 features Gas ballast control to pump high vapour loads, gas ballast can be delivered into the pump to prevent condensation of the vapour carried by the pumped gases. Air can be introduced to the low vacuum stages through the gas ballast control (Manual Figure 1, item 3). Alternatively, an inert gas such as nitrogen can be supplied through a suitable external valve and by using the appropriate adaptor,
available as an accessory. All surfaces of the Leybold ScrollVac 15 pump which are exposed to the pumped gases are free from copper, zinc and cadmium. Exposed components include: anodised, aluminium scrolls, aluminium housing, nickel-plated inlet and exhaust ports, PTFE composite tip-seals, various stainless steel parts and fluorocarbon elastomer seals. Other materials of construction not exposed to vacuum include steel, copper, hydrocarbon lubricant and chemically resistant polymers.
Click Here to view Leybold Scrollvac Operating Manual
Click Here to view Leybold ScrollVac Pump Series Broshure
Click Here to watch Leybold SCROLLVAC plus Family Video
A&J Vacuum repair / rebuild and service all Leybold Scrollvac Vacuum Pumps (10 Plus 141010V30, 15 Plus 141015V30, 18 Plus 141018V30) along with Leybold Scrollvac 1-Phase Vacuum Pumps and other Vacuum Pumps, Leybold Helium Leak Detectors, along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
This new Leybold Scrollvac 18 Plus dry vacuum pumps are produced to operate in a broad spectrum of applications - general laboratory, research, General vacuum pumping applications, Mass Spectomerty, Backing turbo pumps, Research and development and many more other vacuum applications. Pumping Speed 14.5 m3/h, 8.5 cfm
Each of the available Leybold ScrollVac pump models (Scrollvac 7 Plus, 10 Plus, 15 Plus, and 18 Plus) consist of two spiral forms - one moves in an orbiting motion relative to the other, fixed spiral which provides the ultimate vacuum performance. This eccentric design allows several crescent-shaped volumes to be generated. During this process, the volumes are driven from the outside to the inside of the spirals resulting in gas compression. Leybold ScrollVac 18 is known as a very quiet scroll pump. The Leybold ScrollVac is now equipped with the latest technology with a universal voltage power supply for implementation throuthout entire world within voltage range from 100-127 VAC / 200-240VAC 50/60 Hz. The Leybold ScrollVac 18 Plus pumps are truly dry vacuum pumps as all the internal bearings, with their hydrocarbon lubricant, are isolated from the vacuum space. The body of the Leybold ScrollVac pump includes a fixed scroll and an orbiting scroll. The orbiting scroll design is controlled by an electric motor through an eccentric crank on the main motor drive shaft. Gas that enters through the inlet of Leybold ScrollVac 18 pump is compressed by the movement of the orbiting scroll design and moved towards the center of the fixed scroll.
The compressed gas enters the exhaust port near the center of the fixed scroll and is exhausted from the ScrollVac 18 pump through the outlet port. The pump is equiped with customer interface, electric terminal box and an embedded 3-phase electric motor. The electric terminal box provides a method for connecting and configuring the 3-phase supply to the embedded 3-phase motor. The user interface provided by the terminam box consists of :
The Leybold ScrollVac 18 3-phase scroll pump is intially adjusted for high voltage usage, i.e. 380-415 V 50 Hz, and 460 V 60Hz. The flanges of the 3-phase pump are closed, and the power cable is not supplied.
The Leybold ScrollVac 18 features Gas ballast control to pump high vapour loads, gas ballast can be delivered into the pump to prevent condensation of the vapour carried by the pumped gases. Air can be introduced to the low vacuum stages through the gas ballast control (Manual Figure 1, item 3). Alternatively, an inert gas such as nitrogen can be supplied through a suitable external valve and by using the appropriate adaptor,
available as an accessory. All surfaces of the Leybold ScrollVac 18 pump which are exposed to the pumped gases are free from copper, zinc and cadmium. Exposed components include: anodised, aluminium scrolls, aluminium housing, nickel-plated inlet and exhaust ports, PTFE composite tip-seals, various stainless steel parts and fluorocarbon elastomer seals. Other materials of construction not exposed to vacuum include steel, copper, hydrocarbon lubricant and chemically resistant polymers.
Click Here to view Leybold Scrollvac Operating Manual
Click Here to view Leybold ScrollVac Pump Series Broshure
Click Here to watch Leybold SCROLLVAC plus Family Video
A&J Vacuum repair / rebuild and service all Leybold Scrollvac Vacuum Pumps (10 Plus 141010V30, 15 Plus 141015V30, 18 Plus 141018V30) along with Leybold Scrollvac 1-Phase Vacuum Pumps and other Vacuum Pumps, Leybold Helium Leak Detectors, along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
New Leybold Scrollvac 3 dry scroll vacuum pumps offer superior pumping performance in a compact size.
Leybold ScrollVac3 pump is an Ideal Scroll compact vacuum solution for any of your R&D projects. ScrollVac 3 delivers compact size with powerfull performance.
Leybold Scroll Vac 3 Pumps are produced to operate in a broad spectrum of applications;
Leybold Scroll Vac 3 offers Pumping Speed of 3.0 m3/h
The SCROLLVAC 3 plus pump is an very easy to use as it is easy to integrate into your labo set up.
Secure Performance of the Scrollvac 3 plus and Scrollvac 3S Plus come fitted with built-in exhaust valve as standard feauture, same as the entire Leybold Scrollvac pump line.
Built-in exhaust valve provides protection from rapid pressure rise in the event of a power failure. For additional equipment protection, the Leybold SCROLLVAC 3S PLUS offers additional a fast acting solenoid innlet valve to isolate your pump from the rest of the system and preserve the vacuum pressure inside your vacuum system. SCROLLVAC 3S plus comes with built-in delay relay which prevents the inlet valve from opening for 10 seconds to allow the pump get up to speed and evacuate itself.
Click Here to view Leybold Scrollvac Operating Manual
Click Here to view Leybold ScrollVac Pump Series Broshure
Click Here to watch Leybold SCROLLVAC plus Family Video
A&J Vacuum repair / rebuild and service all Leybold Scrollvac Vacuum Pumps (3 Plus 142030V310) along with Leybold Scrollvac 1-Phase Vacuum Pumps and other Vacuum Pumps, Leybold Helium Leak Detectors, along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
New Leybold Scrollvac 3 dry scroll vacuum pumps offer superior pumping performance in a compact size.
Leybold ScrollVac3 pump is an Ideal Scroll compact vacuum solution for any of your R&D projects. ScrollVac 3 delivers compact size with powerfull performance.
Leybold Scroll Vac 3 Pumps are produced to operate in a broad spectrum of applications;
Leybold Scroll Vac 3 offers Pumping Speed of 3.0 m3/h
The SCROLLVAC 3 plus pump is an very easy to use as it is easy to integrate into your labo set up.
Secure Performance of the Scrollvac 3 plus and Scrollvac 3S Plus come fitted with built-in exhaust valve as standard feauture, same as the entire Leybold Scrollvac pump line.
Built-in exhaust valve provides protection from rapid pressure rise in the event of a power failure. For additional equipment protection, the Leybold SCROLLVAC 3S PLUS offers additional a fast acting solenoid innlet valve to isolate your pump from the rest of the system and preserve the vacuum pressure inside your vacuum system. SCROLLVAC 3S plus comes with built-in delay relay which prevents the inlet valve from opening for 10 seconds to allow the pump get up to speed and evacuate itself.
Click Here to view Leybold Scrollvac Operating Manual
Click Here to view Leybold ScrollVac Pump Series Broshure
Click Here to watch Leybold SCROLLVAC plus Family Video
A&J Vacuum repair / rebuild and service all Leybold Scrollvac Vacuum Pumps (3 Plus 142030V310) along with Leybold Scrollvac 1-Phase Vacuum Pumps and other Vacuum Pumps, Leybold Helium Leak Detectors, along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
This new Leybold Scrollvac 10 Plus dry vacuum pumps are produced to operate in a broad spectrum of applications - general laboratory, research, General vacuum pumping applications, Mass Spectomerty, Backing turbo pumps, Research and development and many more other vacuum applications. Pumping Speed 10.6 m3/h , 6.2 cfm
Each of the available Leybold ScrollVac 10 pump models (Scrollvac 7 Plus, 10 Plus, 15 Plus, and 18 Plus) consists of two spiral forms - one moves in an orbiting motion relative to the other, fixed spiral which provides the ultimate vacuum performance. This eccentric design allows several crescent-shaped volumes to be generated. During this process, the volumes are driven from the outside to the inside of the spirals resulting in gas compression. Leybold ScrollVac 10 is known as a very quiet scroll pump. The Leybold ScrollVac is now equipped with the latest technology with a universal voltage power supply for implementation throuthout entire world within voltage range from 100-127 VAC / 200-240VAC 50/60 Hz. The Leybold ScrollVac 10 Plus pumps are truly dry vacuum pumps as all the internal bearings, with their hydrocarbon lubricant, are isolated from the vacuum space. The body of the Leybold ScrollVac pump includes a fixed scroll and an orbiting scroll. The orbiting scroll design is controlled by an electric motor through an eccentric crank on the main motor drive shaft. Gas that enters through the inlet of Leybold ScrollVac 10 pump is compressed by the movement of the orbiting scroll design and moved towards the center of the fixed scroll.
The compressed gas enters the exhaust port near the center of the fixed scroll and is exhausted from the ScrollVac 10 pump through the outlet port. The pump is equiped with customer interface, electric terminal box and an embedded 3-phase electric motor. The electric terminal box provides a method for connecting and configuring the 3-phase supply to the embedded 3-phase motor. The user interface provided by the terminam box consists of :
The Leybold ScrollVac 10 3-phase scroll pump is intially adjusted for high voltage usage, i.e. 380-415 V 50 Hz, and 460 V 60Hz. The flanges of the 3-phase pump are closed, and the power cable is not supplied.
The Leybold ScrollVac 10 features Gas ballast control to pump high vapour loads, gas ballast can be delivered into the pump to prevent condensation of the vapour carried by the pumped gases. Air can be introduced to the low vacuum stages through the gas ballast control (Manual Figure 1, item 3). Alternatively, an inert gas such as nitrogen can be supplied through a suitable external valve and by using the appropriate adaptor,
available as an accessory. All surfaces of the Leybold ScrollVac 10 pump which are exposed to the pumped gases are free from copper, zinc and cadmium. Exposed components include: anodised, aluminium scrolls, aluminium housing, nickel-plated inlet and exhaust ports, PTFE composite tip-seals, various stainless steel parts and fluorocarbon elastomer seals. Other materials of construction not exposed to vacuum include steel, copper, hydrocarbon lubricant and chemically resistant polymers.
Click Here to view Leybold Scrollvac Operating Manual
Click Here to view Leybold ScrollVac Pump Series Broshure
Click Here to watch Leybold SCROLLVAC plus Family Video
A&J Vacuum repair / rebuild and service all Leybold Scrollvac 3-Phase Vacuum Pumps (10 Plus 141010V30, 15 Plus 141015V30, 18 Plus 141018V30) along with Leybold Scrollvac 1-Phase Vacuum Pumps and other Vacuum Pumps, Leybold Helium Leak Detectors, along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
This new Leybold Scrollvac 15 Plus dry vacuum pumps are produced to operate in a broad spectrum of applications - general laboratory, research, General vacuum pumping applications, Mass Spectomerty, Backing turbo pumps, Research and development and many more other vacuum applications. Pumping Speed 14.5 m3/h, 8.5 cfm
Each of the available Leybold ScrollVac pump models (Scrollvac 7 Plus, 10 Plus, 15 Plus, and 18 Plus) consist of two spiral forms - one moves in an orbiting motion relative to the other, fixed spiral which provides the ultimate vacuum performance. This eccentric design allows several crescent-shaped volumes to be generated. During this process, the volumes are driven from the outside to the inside of the spirals resulting in gas compression. Leybold ScrollVac 15 is known as a very quiet scroll pump. The Leybold ScrollVac is now equipped with the latest technology with a universal voltage power supply for implementation throuthout entire world within voltage range from 100-127 VAC / 200-240VAC 50/60 Hz. The Leybold ScrollVac 15 Plus pumps are truly dry vacuum pumps as all the internal bearings, with their hydrocarbon lubricant, are isolated from the vacuum space. The body of the Leybold ScrollVac pump includes a fixed scroll and an orbiting scroll. The orbiting scroll design is controlled by an electric motor through an eccentric crank on the main motor drive shaft. Gas that enters through the inlet of Leybold ScrollVac 15 pump is compressed by the movement of the orbiting scroll design and moved towards the center of the fixed scroll.
The compressed gas enters the exhaust port near the center of the fixed scroll and is exhausted from the ScrollVac 15 pump through the outlet port. The pump is equiped with customer interface, electric terminal box and an embedded 3-phase electric motor. The electric terminal box provides a method for connecting and configuring the 3-phase supply to the embedded 3-phase motor. The user interface provided by the terminam box consists of :
The Leybold ScrollVac 15 3-phase scroll pump is intially adjusted for high voltage usage, i.e. 380-415 V 50 Hz, and 460 V 60Hz. The flanges of the 3-phase pump are closed, and the power cable is not supplied.
The Leybold ScrollVac 15 features Gas ballast control to pump high vapour loads, gas ballast can be delivered into the pump to prevent condensation of the vapour carried by the pumped gases. Air can be introduced to the low vacuum stages through the gas ballast control (Manual Figure 1, item 3). Alternatively, an inert gas such as nitrogen can be supplied through a suitable external valve and by using the appropriate adaptor,
available as an accessory. All surfaces of the Leybold ScrollVac 15 pump which are exposed to the pumped gases are free from copper, zinc and cadmium. Exposed components include: anodised, aluminium scrolls, aluminium housing, nickel-plated inlet and exhaust ports, PTFE composite tip-seals, various stainless steel parts and fluorocarbon elastomer seals. Other materials of construction not exposed to vacuum include steel, copper, hydrocarbon lubricant and chemically resistant polymers.
Click Here to view Leybold Scrollvac Operating Manual
Click Here to view Leybold ScrollVac Pump Series Broshure
Click Here to watch Leybold SCROLLVAC plus Family Video
A&J Vacuum repair / rebuild and service all Leybold Scrollvac Vacuum Pumps (10 Plus 141010V30, 15 Plus 141015V30, 18 Plus 141018V30) along with Leybold Scrollvac 1-Phase Vacuum Pumps and other Vacuum Pumps, Leybold Helium Leak Detectors, along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
This new Leybold Scrollvac 18 Plus dry vacuum pumps are produced to operate in a broad spectrum of applications - general laboratory, research, General vacuum pumping applications, Mass Spectomerty, Backing turbo pumps, Research and development and many more other vacuum applications. Pumping Speed 14.5 m3/h, 8.5 cfm
Each of the available Leybold ScrollVac pump models (Scrollvac 7 Plus, 10 Plus, 15 Plus, and 18 Plus) consist of two spiral forms - one moves in an orbiting motion relative to the other, fixed spiral which provides the ultimate vacuum performance. This eccentric design allows several crescent-shaped volumes to be generated. During this process, the volumes are driven from the outside to the inside of the spirals resulting in gas compression. Leybold ScrollVac 18 is known as a very quiet scroll pump. The Leybold ScrollVac is now equipped with the latest technology with a universal voltage power supply for implementation throuthout entire world within voltage range from 100-127 VAC / 200-240VAC 50/60 Hz. The Leybold ScrollVac 18 Plus pumps are truly dry vacuum pumps as all the internal bearings, with their hydrocarbon lubricant, are isolated from the vacuum space. The body of the Leybold ScrollVac pump includes a fixed scroll and an orbiting scroll. The orbiting scroll design is controlled by an electric motor through an eccentric crank on the main motor drive shaft. Gas that enters through the inlet of Leybold ScrollVac 18 pump is compressed by the movement of the orbiting scroll design and moved towards the center of the fixed scroll.
The compressed gas enters the exhaust port near the center of the fixed scroll and is exhausted from the ScrollVac 18 pump through the outlet port. The pump is equiped with customer interface, electric terminal box and an embedded 3-phase electric motor. The electric terminal box provides a method for connecting and configuring the 3-phase supply to the embedded 3-phase motor. The user interface provided by the terminam box consists of :
The Leybold ScrollVac 18 3-phase scroll pump is intially adjusted for high voltage usage, i.e. 380-415 V 50 Hz, and 460 V 60Hz. The flanges of the 3-phase pump are closed, and the power cable is not supplied.
The Leybold ScrollVac 18 features Gas ballast control to pump high vapour loads, gas ballast can be delivered into the pump to prevent condensation of the vapour carried by the pumped gases. Air can be introduced to the low vacuum stages through the gas ballast control (Manual Figure 1, item 3). Alternatively, an inert gas such as nitrogen can be supplied through a suitable external valve and by using the appropriate adaptor,
available as an accessory. All surfaces of the Leybold ScrollVac 18 pump which are exposed to the pumped gases are free from copper, zinc and cadmium. Exposed components include: anodised, aluminium scrolls, aluminium housing, nickel-plated inlet and exhaust ports, PTFE composite tip-seals, various stainless steel parts and fluorocarbon elastomer seals. Other materials of construction not exposed to vacuum include steel, copper, hydrocarbon lubricant and chemically resistant polymers.
Click Here to view Leybold Scrollvac Operating Manual
Click Here to view Leybold ScrollVac Pump Series Broshure
Click Here to watch Leybold SCROLLVAC plus Family Video
A&J Vacuum repair / rebuild and service all Leybold Scrollvac Vacuum Pumps (10 Plus 141010V30, 15 Plus 141015V30, 18 Plus 141018V30) along with Leybold Scrollvac 1-Phase Vacuum Pumps and other Vacuum Pumps, Leybold Helium Leak Detectors, along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.