phone icon
Sales and Service
855 882 2886
basket icon
0 Items
$0.00
Find us on:
Main Categories

- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS

Vacuum Hardware

- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Category of products: Reducers & Adaptors
- Agilent Technologies / Varian
- Stokes Vacuum
- AJVS
- Thread Sealants
- Mounting Kits
- Leak Detectors
- Shipping Crates
- Cooling Water Circulators
- Muffle Furnace
- Rotary Evaporators
- Cold Traps
Found 8 products
Item#: PN07847 Mfr Part#: KF16MVCR6 Manufacturer: AJVS
PRICE: $115.00
WEB SAVINGS: $5.00
YOU PAY: $110.00

KF - VCR Male Adapter, KF 16 (NW 16) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07847


KF - VCR Male Adapter, KF 16 (NW 16 Flange) to 1/4 inch VCR, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.18 in / 30 mm

  • B: 0.17 in / 4.4 mm

  • C: 1.46 in / 37 mm


Overview

KF - VCR Male Adapter, KF 16 (NW 16) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07847

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 16 to 1/4 inch VCR, Stainless Steel Vacuum Fitting.

The KF to VCR Adapters are available in the following sizes:

  • NW 16 x 1/4" VCR

  • NW 16 x 1/2" VCR

  • NW 25 x 1/4" VCR

  • NW 25 x 1/2" VCR

  • NW 40 x 1/4" VCR

  • NW 40 x 1/2" VCR

  • NW 50 x 1/4" VCR

  • NW 50 x 1/2" VCR

 


Condition: New In Stock
Item#: PN07849 Mfr Part#: KF25MVCR6 Manufacturer: AJVS
PRICE: $169.92
WEB SAVINGS: $106.93
YOU PAY: $62.99

KF - VCR Male Adapter, KF 25 (NW 25) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07849


KF - VCR Male Adapter, KF 25 (NW 25 Flange) to 1/4 inch VCR, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.57 in / 40 mm

  • B: 0.17 in / 4.4 mm

  • C: 1.46 in / 37 mm


Overview

KF - VCR Male Adapter, KF 25 (NW 25) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07849

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 25 to 1/4 inch VCR, Stainless Steel Vacuum Fitting.

The KF to VCR Adapters are available in the following sizes:

  • NW 16 x 1/4" VCR

  • NW 16 x 1/2" VCR

  • NW 25 x 1/4" VCR

  • NW 25 x 1/2" VCR

  • NW 40 x 1/4" VCR

  • NW 40 x 1/2" VCR

  • NW 50 x 1/4" VCR

  • NW 50 x 1/2" VCR

 


Condition: New In Stock
Item#: PN07851 Mfr Part#: KF40MVCR6 Manufacturer: AJVS
PRICE: $135.00
WEB SAVINGS: $23.00
YOU PAY: $112.00

KF - VCR Male Adapter, KF 40 (NW 40) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07851


KF - VCR Male Adapter, KF 40 (NW 40 Flange) to 1/4 inch VCR, Stainless Steel Vacuum Fitting Dimensions:

  • A: 2.17 in / 55 mm

  • B: 0.17 in / 4.4 mm

  • C: 1.46 in / 37 mm


Overview

KF - VCR Male Adapter, KF 40 (NW 40) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07851

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 40 to 1/4 inch VCR, Stainless Steel Vacuum Fitting.

The KF to VCR Adapters are available in the following sizes:

  • NW 16 x 1/4" VCR

  • NW 16 x 1/2" VCR

  • NW 25 x 1/4" VCR

  • NW 25 x 1/2" VCR

  • NW 40 x 1/4" VCR

  • NW 40 x 1/2" VCR

  • NW 50 x 1/4" VCR

  • NW 50 x 1/2" VCR


Condition: New In Stock
Item#: PN07852 Mfr Part#: KF40MVCR13 Manufacturer: AJVS
PRICE: $207.36
WEB SAVINGS: $117.37
YOU PAY: $89.99

KF - VCR Male Adapter, KF 40 (NW 40) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07852


KF - VCR Male Adapter, KF 40 (NW 40 Flange) to 1/2 inch VCR, Stainless Steel Vacuum Fitting Dimensions:

  • A: 2.17 in / 55 mm

  • B: 0.41 in / 10.4 mm

  • C: 1.65 in / 41.9 mm


Overview

KF - VCR Male Adapter, KF 40 (NW 40) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07852

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 40 to 1/2 inch VCR, Stainless Steel Vacuum Fitting.

The KF to VCR Adapters are available in the following sizes:

  • NW 16 x 1/4" VCR

  • NW 16 x 1/2" VCR

  • NW 25 x 1/4" VCR

  • NW 25 x 1/2" VCR

  • NW 40 x 1/4" VCR

  • NW 40 x 1/2" VCR

  • NW 50 x 1/4" VCR

  • NW 50 x 1/2" VCR

 


Condition: New In Stock
Item#: PN07853 Mfr Part#: KF50MVCR6 Manufacturer: AJVS
PRICE: $198.00
WEB SAVINGS: $21.00
YOU PAY: $177.00

KF - VCR Male Adapter, KF 50 (NW 50) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07853


KF - VCR Male Adapter, KF 50 (NW 50 Flange) to 1/4 inch VCR, Stainless Steel Vacuum Fitting Dimensions:

  • A: 2.95 in / 75 mm

  • B: 0.17 in / 4.4 mm

  • C: 1.46 in / 37 mm


Overview

KF - VCR Male Adapter, KF 50 (NW 50) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07853

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 50 to 1/4 inch VCR, Stainless Steel Vacuum Fitting.

The KF to VCR Adapters are available in the following sizes:

  • NW 16 x 1/4" VCR

  • NW 16 x 1/2" VCR

  • NW 25 x 1/4" VCR

  • NW 25 x 1/2" VCR

  • NW 40 x 1/4" VCR

  • NW 40 x 1/2" VCR

  • NW 50 x 1/4" VCR

  • NW 50 x 1/2" VCR

 


Condition: New In Stock
Item#: PN07854 Mfr Part#: KF50MVCR13 Manufacturer: AJVS
PRICE: $246.00
WEB SAVINGS: $156.00
YOU PAY: $90.00

KF - VCR Male Adapter, KF 50 (NW 50) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07854


KF - VCR Male Adapter, KF 50 (NW 50 Flange) to 1/2 inch VCR, Stainless Steel Vacuum Fitting Dimensions:

  • A: 2.95 in / 75 mm

  • B: 0.41 in / 10.4 mm

  • C: 1.65 in / 41.9 mm


Overview

KF - VCR Male Adapter, KF 50 (NW 50) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07854

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 50 to 1/2 inch VCR, Stainless Steel Vacuum Fitting.

The KF to VCR Adapters are available in the following sizes:

  • NW 16 x 1/4" VCR

  • NW 16 x 1/2" VCR

  • NW 25 x 1/4" VCR

  • NW 25 x 1/2" VCR

  • NW 40 x 1/4" VCR

  • NW 40 x 1/2" VCR

  • NW 50 x 1/4" VCR

  • NW 50 x 1/2" VCR


Condition: New In Stock
Item#: PN07848 Mfr Part#: KF16MVCR13 Manufacturer: AJVS
PRICE: $234.00
WEB SAVINGS: $114.00
YOU PAY: $120.00

KF - VCR Male Adapter, KF 16 (NW 16) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07848


KF - VCR Male Adapter, KF 16 (NW 16 Flange) to 1/2 inch VCR, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.18 in / 30 mm

  • B: 0.41 in / 10.4 mm

  • C: 1.65 in / 41.9 mm


Overview

KF - VCR Male Adapter, KF 16 (NW 16) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07848

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 16 to 1/2 inch VCR, Stainless Steel Vacuum Fitting.

The KF to VCR Adapters are available in the following sizes:

  • NW 16 x 1/4" VCR

  • NW 16 x 1/2" VCR

  • NW 25 x 1/4" VCR

  • NW 25 x 1/2" VCR

  • NW 40 x 1/4" VCR

  • NW 40 x 1/2" VCR

  • NW 50 x 1/4" VCR

  • NW 50 x 1/2" VCR


Condition: New
Item#: PN07850 Mfr Part#: KF25MVCR13 Manufacturer: AJVS
PRICE: $201.60
WEB SAVINGS: $115.61
YOU PAY: $85.99

KF - VCR Male Adapter, KF 25 (NW 25) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07850


KF - VCR Male Adapter, KF 25 (NW 25 Flange) to 1/2 inch VCR, Stainless Steel Vacuum Fitting Dimensions:

  • A: 1.57 in / 40 mm

  • B: 0.41 in / 10.4 mm

  • C: 1.65 in / 41.9 mm


Overview

KF - VCR Male Adapter, KF 25 (NW 25) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07850

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 25 to 1/2 inch VCR, Stainless Steel Vacuum Fitting.

The KF to VCR Adapters are available in the following sizes:

  • NW 16 x 1/4" VCR

  • NW 16 x 1/2" VCR

  • NW 25 x 1/4" VCR

  • NW 25 x 1/2" VCR

  • NW 40 x 1/4" VCR

  • NW 40 x 1/2" VCR

  • NW 50 x 1/4" VCR

  • NW 50 x 1/2" VCR


Condition: New
Contact
address
A&J Vacuum Services
16 Somerset Place, Clifton, NJ 07012
customer service
Customer Service
Phone: 973-249-0854, Fax: 973-249-0855
working hours
Service Hours
8:00am to 5:00pm, Monday thru Friday EST
All trademarks, trade names or logons mentioned or used are the property of their respective owners.