Adapter KF to Swagelok, KF 16 (NW16 Flange) to 1/2 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:
A: 1.18 in / 30 mm
B: 0.43 in / 10.8 mm
C: 1.77 in / 45 mm
Overview
Swagelok Adapter, KF 16 (NW 16) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07829
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 16 to Swagelok 0.5 inch, Stainless Steel Vacuum Fitting Adapter.
The KF to Swagelok Adapters are available in the following sizes:
NW 16 x 1/4" Swagelok
NW 16 x 1/2" Swagelok
NW 25 x 1/4" Swagelok
NW 25 x 1/2" Swagelok
NW 40 x 1/4" Swagelok
NW 40 x 1/2" Swagelok
NW 50 x 1/4" Swagelok
NW 50 x 1/2" Swagelok
Adapter KF to Swagelok, KF 25 (NW25 Flange) to 1/4 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:
A: 1.57 in / 40 mm
B: 0.19 in / 4.8 mm
C: 1.44 in / 36.6 mm
Overview
Swagelok Adapter, KF 25 (NW 25) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07830
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 25 to Swagelok 0.25 inch, Stainless Steel Vacuum Fitting Adapter.
The KF to Swagelok Adapters are available in the following sizes:
NW 16 x 1/4" Swagelok
NW 16 x 1/2" Swagelok
NW 25 x 1/4" Swagelok
NW 25 x 1/2" Swagelok
NW 40 x 1/4" Swagelok
NW 40 x 1/2" Swagelok
NW 50 x 1/4" Swagelok
NW 50 x 1/2" Swagelok
Adapter KF to Swagelok, KF 25 (NW 25 Flange) to 1/2 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:
A: 1.57 in / 40 mm
B: 0.43 in / 10.8 mm
C: 2.14 in / 54.3 mm
Overview
Swagelok Adapter, KF 25 (NW 25) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07831
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 25 to Swagelok 0.5 inch, Stainless Steel Vacuum Fitting Adapter.
The KF to Swagelok Adapters are available in the following sizes:
NW 16 x 1/4" Swagelok
NW 16 x 1/2" Swagelok
NW 25 x 1/4" Swagelok
NW 25 x 1/2" Swagelok
NW 40 x 1/4" Swagelok
NW 40 x 1/2" Swagelok
NW 50 x 1/4" Swagelok
NW 50 x 1/2" Swagelok
Adapter KF to Swagelok, KF 40 (NW40 Flange) to 1/4 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:
A: 2.17 in / 55 mm
B: 0.19 in / 4.8 mm
C: 1.44 in / 36.6 mm
Overview
Swagelok Adapter, KF 40 (NW 40) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07832
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 40 to Swagelok 0.25 inch, Stainless Steel Vacuum Fitting Adapter.
The KF to Swagelok Adapters are available in the following sizes:
NW 16 x 1/4" Swagelok
NW 16 x 1/2" Swagelok
NW 25 x 1/4" Swagelok
NW 25 x 1/2" Swagelok
NW 40 x 1/4" Swagelok
NW 40 x 1/2" Swagelok
NW 50 x 1/4" Swagelok
NW 50 x 1/2" Swagelok
Adapter KF to Swagelok, KF 40 (NW40 Flange) to 1/2 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:
A: 2.17 in / 55 mm
B: 0.43 in / 10.8 mm
C: 2.14 in / 54.3 mm
Overview
Swagelok Adapter, KF 40 (NW 40) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07833
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 40 to Swagelok 0.5 inch, Stainless Steel Vacuum Fitting Adapter.
The KF to Swagelok Adapters are available in the following sizes:
NW 16 x 1/4" Swagelok
NW 16 x 1/2" Swagelok
NW 25 x 1/4" Swagelok
NW 25 x 1/2" Swagelok
NW 40 x 1/4" Swagelok
NW 40 x 1/2" Swagelok
NW 50 x 1/4" Swagelok
NW 50 x 1/2" Swagelok
Adapter KF to Swagelok, KF 50 (NW50 Flange) to 1/4 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:
A: 2.95 in / 75 mm
B: 0.19 in / 4.8 mm
C: 1.44 in / 36.6 mm
Overview
Swagelok Adapter, KF 50 (NW 50) to 1/4" Swagelok, Stainless Steel Vacuum Fitting, PN07834
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 50 to Swagelok 0.25 inch, Stainless Steel Vacuum Fitting Adapter.
The KF to Swagelok Adapters are available in the following sizes:
NW 16 x 1/4" Swagelok
NW 16 x 1/2" Swagelok
NW 25 x 1/4" Swagelok
NW 25 x 1/2" Swagelok
NW 40 x 1/4" Swagelok
NW 40 x 1/2" Swagelok
NW 50 x 1/4" Swagelok
NW 50 x 1/2" Swagelok
Adapter KF to Swagelok, KF 50 (NW50 Flange) to 1/2 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:
A: 2.95 in / 75 mm
B: 0.43 in / 10.8 mm
C: 2.14 in / 54.3 mm
Overview
Swagelok Adapter, KF 50 (NW 50) to 1/2" Swagelok, Stainless Steel Vacuum Fitting, PN07835
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 50 to Swagelok 0.5 inch, Stainless Steel Vacuum Fitting Adapter.
The KF to Swagelok Adapters are available in the following sizes:
NW 16 x 1/4" Swagelok
NW 16 x 1/2" Swagelok
NW 25 x 1/4" Swagelok
NW 25 x 1/2" Swagelok
NW 40 x 1/4" Swagelok
NW 40 x 1/2" Swagelok
NW 50 x 1/4" Swagelok
NW 50 x 1/2" Swagelok
Adapter KF to Swagelok, KF 16 (NW16 Flange) to 1/4 inch Swagelok, Stainless Steel Vacuum Fitting Dimensions:
A: 1.18 in / 30 mm
B: 0.19 in / 4.8 mm
C: 1.44 in / 36.6 mm
Overview
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - Swagelok Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 16 to Swagelok 0.25 inch, Stainless Steel Vacuum Fitting Adapter.
The KF to Swagelok Adapters are available in the following sizes:
NW 16 x 1/4" Swagelok
NW 16 x 1/2" Swagelok
NW 25 x 1/4" Swagelok
NW 25 x 1/2" Swagelok
NW 40 x 1/4" Swagelok
NW 40 x 1/2" Swagelok
NW 50 x 1/4" Swagelok
NW 50 x 1/2" Swagelok