KF Conical Reducing Adaptor

The Conical KF-16 to KF-25 reducers or reducing adaptors are used in KF, also referred to as NW, assemblies. The Conical KF-16 to KF-25 reducers have NW-16 to NW-25 flange size and are made of stainless steel. These Conical reducing adaptors are used together with a centering rings or o-rings and quick clamps. The clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring generating vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 16 to KF 25 (NW 25 to NW 16) conical reducer.

The KF Conical Reducers or Reducing Adaptors are available in the following sizes:

KF 25 to KF 16 (NW 25 to NW 16)
KF 40 to KF 16 (NW 40 to NW 16)
KF 40 to KF 25 (NW 40 to NW 25)
KF 50 to KF 16 (NW 50 to NW 16)
KF 50 to KF 25 (NW 50 to NW 25)
KF 50 to KF 40 (NW 50 to NW 40)

Condition: New In Stock

Reducer Conical KF-40 to KF-16, KF40 to KF16, Vacuum Fitting, ISO-KF Flange Size NW-40 to NW-16, Stainless Steel Hardware, PN07745

Item#: PN07745 Mfr Part#: KF40RA16 Manufacturer: AJVS

PRICE: $71.00

WEB SAVINGS: $9.00

YOU PAY: $62.00

Reducer Conical KF-40 to KF-16, KF40 to KF16, Vacuum Fitting, ISO-KF Flange Size NW-40 to NW-16, Stainless Steel Hardware, PN07745

KF-40 to KF-16, ISO-KF Flange Size NW-40 to NW-16 Conical Reducer Vacuum Fitting Dimensions:

A: 2.17 in / 55 mm
B: 1.18 in / 30 mm
C: 1.57 in / 40 mm

Overview

KF-40 to KF-16 (KF 40 to KF 16) Conical Reducer, Vacuum Fitting, ISO-KF Flange Size NW-40 to NW-16

Quick flange fitting sizes are KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The Conical KF-40 to KF-16 reducers or reducing adaptors are used in KF, also referred to as NW, assemblies. The Conical KF-40 to KF-16 reducers have NW-40 to NW-16 flange size and are made of stainless steel. These Conical reducing adaptors are used together with a centering rings or o-rings and quick clamps. The clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring generating vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 40 to KF 16 (NW 40 to NW 16) conical reducer.

The KF Conical Reducers or Reducing Adaptors are available in the following sizes:

KF 25 to KF 16 (NW 25 to NW 16)
KF 40 to KF 16 (NW 40 to NW 16)
KF 40 to KF 25 (NW 40 to NW 25)
KF 50 to KF 16 (NW 50 to NW 16)
KF 50 to KF 25 (NW 50 to NW 25)
KF 50 to KF 40 (NW 50 to NW 40)

Condition: New In Stock

Edwards KF25/16 Reducer, Aluminum, C10514437

Item#: PN13344 Mfr Part#: C10514437 Manufacturer: Vacuum Fittings

PRICE: $56.23

YOU PAY: $77.00

Edwards KF25/16 Reducer, Aluminum, C10514437

Condition: New In Stock

Reducer Conical KF-40 to KF-25 , KF40 to KF25, Vacuum Fitting, ISO-KF Flange Size NW-40 to NW-25, Stainless Steel Hardware, PN07746

Item#: PN07746 Mfr Part#: KF40RA25 Manufacturer: AJVS

PRICE: $70.00

WEB SAVINGS: $10.00

YOU PAY: $60.00

Reducer Conical KF-40 to KF-25 , KF40 to KF25, Vacuum Fitting, ISO-KF Flange Size NW-40 to NW-25, Stainless Steel Hardware, PN07746

KF-40 to KF-25, ISO-KF Flange Size NW-40 to NW-25 Conical Reducer Vacuum Fitting Dimensions:

A: 2.17 in / 55 mm
B: 1.57 in / 40 mm
C: 1.57 in / 40 mm

Overview

KF-40 to KF-25 (KF 40 to KF 25) Conical Reducer, Vacuum Fitting, ISO-KF Flange Size NW-40 to NW-25

Quick flange fitting sizes are KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The Conical KF-40 to KF-25 reducers or reducing adaptors are used in KF, also referred to as NW, assemblies. The Conical KF-40 to KF-25 reducers have NW-40 to NW-25 flange size and are made of stainless steel. These Conical reducing adaptors are used together with a centering rings or o-rings and quick clamps. The clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring generating vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 40 to KF 25 (NW 40 to NW 25) conical reducer.

The KF Conical Reducers or Reducing Adaptors are available in the following sizes:

KF 25 to KF 16 (NW 25 to NW 16)
KF 40 to KF 16 (NW 40 to NW 16)
KF 40 to KF 25 (NW 40 to NW 25)
KF 50 to KF 16 (NW 50 to NW 16)
KF 50 to KF 25 (NW 50 to NW 25)
KF 50 to KF 40 (NW 50 to NW 40)

Condition: New In Stock

Reducer Conical KF-50 to KF-16 , KF50 to KF16, Vacuum Fitting, ISO-KF Flange Size NW-50 to NW-16, Stainless Steel Hardware, PN07747

Item#: PN07747 Mfr Part#: KF50RA16 Manufacturer: AJVS

PRICE: $87.00

WEB SAVINGS: $5.00

YOU PAY: $82.00

Reducer Conical KF-50 to KF-16 , KF50 to KF16, Vacuum Fitting, ISO-KF Flange Size NW-50 to NW-16, Stainless Steel Hardware, PN07747

KF-50 to KF-16, ISO-KF Flange Size NW-50 to NW-16 Conical Reducer Vacuum Fitting Dimensions:

A: 2.95 in / 75 mm
B: 1.18 in / 30 mm
C: 1.57 in / 40 mm

Overview

KF-50 to KF-16 (KF 50 to KF 16) Conical Reducer, Vacuum Fitting, ISO-KF Flange Size NW-50 to NW-16

Quick flange fitting sizes are KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The Conical KF-50 to KF-16 reducers or reducing adaptors are used in KF, also referred to as NW, assemblies. The Conical KF-50 to KF-16 reducers have NW-50 to NW-16 flange size and are made of stainless steel. These Conical reducing adaptors are used together with a centering rings or o-rings and quick clamps. The clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring generating vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 50 to KF 16 (NW 50 to NW 16) conical reducer.

The KF Conical Reducers or Reducing Adaptors are available in the following sizes:

KF 25 to KF 16 (NW 25 to NW 16)
KF 40 to KF 16 (NW 40 to NW 16)
KF 40 to KF 25 (NW 40 to NW 25)
KF 50 to KF 16 (NW 50 to NW 16)
KF 50 to KF 25 (NW 50 to NW 25)
KF 50 to KF 40 (NW 50 to NW 40)

Condition: New In Stock

Reducer Conical KF-50 to KF-25 , KF50 to KF25, Vacuum Fitting, ISO-KF Flange Size NW-50 to NW-25, Stainless Steel Hardware, PN07748

Item#: PN07748 Mfr Part#: KF50RA25 Manufacturer: AJVS

PRICE: $96.00

WEB SAVINGS: $27.00

YOU PAY: $69.00

Reducer Conical KF-50 to KF-25 , KF50 to KF25, Vacuum Fitting, ISO-KF Flange Size NW-50 to NW-25, Stainless Steel Hardware, PN07748

KF-50 to KF-25, ISO-KF Flange Size NW-50 to NW-25 Conical Reducer Vacuum Fitting Dimensions:

A: 2.95 in / 75 mm
B: 1.57 in / 40 mm
C: 1.57 in / 40 mm

Overview

KF-50 to KF-25 (KF 50 to KF 25) Conical Reducer, Vacuum Fitting, ISO-KF Flange Size NW-50 to NW-25

Quick flange fitting sizes are KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The Conical KF-50 to KF-25 reducers or reducing adaptors are used in KF, also referred to as NW, assemblies. The Conical KF-50 to KF-25 reducers have NW-50 to NW-25 flange size and are made of stainless steel. These Conical reducing adaptors are used together with a centering rings or o-rings and quick clamps. The clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring generating vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 50 to KF 25 (NW 50 to NW 25) conical reducer.

The KF Conical Reducers or Reducing Adaptors are available in the following sizes:

KF 25 to KF 16 (NW 25 to NW 16)
KF 40 to KF 16 (NW 40 to NW 16)
KF 40 to KF 25 (NW 40 to NW 25)
KF 50 to KF 16 (NW 50 to NW 16)
KF 50 to KF 25 (NW 50 to NW 25)
KF 50 to KF 40 (NW 50 to NW 40)

Condition: New In Stock

Reducer Conical KF-50 to KF-40 , KF50 to KF40, Vacuum Fitting, ISO-KF Flange Size NW-50 to NW-40, Stainless Steel Hardware, PN07749

Item#: PN07749 Mfr Part#: KF50RA40 Manufacturer: AJVS

PRICE: $85.00

WEB SAVINGS: $4.00

YOU PAY: $81.00

Reducer Conical KF-50 to KF-40 , KF50 to KF40, Vacuum Fitting, ISO-KF Flange Size NW-50 to NW-40, Stainless Steel Hardware, PN07749

KF-50 to KF-40, ISO-KF Flange Size NW-50 to NW-40 Conical Reducer Vacuum Fitting Dimensions:

A: 2.95 in / 75 mm
B: 2.17 in / 55 mm
C: 1.57 in / 40 mm

Overview

KF-50 to KF-40 (KF 50 to KF 40) Conical Reducer, Vacuum Fitting, ISO-KF Flange Size NW-50 to NW-40

Quick flange fitting sizes are KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.

The Conical KF-50 to KF-40 reducers or reducing adaptors are used in KF, also referred to as NW, assemblies. The Conical KF-50 to KF-40 reducers have NW-50 to NW-40 flange size and are made of stainless steel. These Conical reducing adaptors are used together with a centering rings or o-rings and quick clamps. The clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring generating vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF 50 to KF 40 (NW 50 to NW 40) conical reducer.

The KF Conical Reducers or Reducing Adaptors are available in the following sizes: