Shopping Cart ( )

Agilent Technologies / Varian TV 301 Navigator Turbo Pump, CFF 6", PUMP ONLY, 9698919

Condition: Remanufactured
Call us for Availability
Item#:PN00730
Mfr Part#:9698919
Manufacturer:Agilent Technologies / Varian
PRICE:
$6,999.00
Web savings:
$249.00
YOU PAY:
$6,750.00
Remanufactured Agilent Technologies / Varian TV301 Navigator Turbo Vacuum Pump, CFF 6", PUMP ONLY, 969-8919
Features:
  • Pumping Speed (l/s): N2: 250
  • Compression Ratio: N2: > 2 x 108
  • Base Pressure with Recommended Fore Pump: < 2 x 10-10 mbar
  • Foreline Flange: KF 16 NW
6 months warranty

Remanufactured Agilent Technologies / Varian TV301 Navigator Turbo Vacuum Pump, CFF 6", PUMP ONLY, 969-8919

 

Agilent TV301 / Varian V301 Overview:


The Varian  TV 301, V301 9698919 Navigator is an integrated system with a turbomolecular pump for high and ultra-high vacuum applications with its relevant controller. The system can pump any type of gas or gas compound. It is not suitable for pumping liquids or solid particles. The pumping action is obtained through a high speed turbine (max. 56000 rpm) driven by a high-performance 3-phase electric motor. The TV 301 Navigator is free of contaminating agents and, therefore, is suitable for applications requiring a "clean" vacuum. It is equipped with auxiliary connectors to supply an additional fan, to control the vent valve, to be controlled from a remote site by means of an host computer connected through a serial line (RS232 or RS485). The TV 301 Tubro Pump is available in four different models that differ only in the high vacuum flange. The pump consists of a high frequency motor driving a turbine fitted with 8 bladed stages and 3 Macrotorr stages. The turbine rotates in an anticlockwise direction when viewed from the high vacuum flange end. The turbine is made of high-strength aluminium alloy, machined from a single block. The Macrotorr stages are in the form of four discs. The turbine rotor is supported by permanently lubricated high precision ceramic ball bearings installed on the forevacuum side of the pump. The static blades of the stator are made of stainless steel. These are supported and accurately positioned by spacer rings. The Macrotorr stators are in the form of selfpositioning machined discs with pumping channels and an opening restricted by the corresponding rotor discs. These are made of aluminium alloy.

During normal operation, the motor is fed with a voltage of 54 Vac three-phase at 933 Hz. To reduce losses during start-up to a minimum, the frequency increases according to a ramp with a higher initial voltage/frequency ratio. The pump can be water cooled or air cooled: in the first case the customer can use the dedicated channels on the pump body, in the second case an external optional fan is available. A thermistor sensor is mounted near the upper bearing to prevent the pump from overheating. The pump is balanced after assembly with a residual vibration amplitude less than 0.01. The pump can operate in any position and can be supported on the high vacuum flange. The connection of the forevacuum on the side of the pump is a KF 16 NW flange.

 

Varian / Agilent Varian V301 Pumping Speed & Compression ratio Graph:


Varian / Agilent V301 Pumping speed and Compression ratio graph, 969-8919

 

Varian / Agilent Varian V301 Dimensions:


Varian / Agilent V301 Pumping speed and Compression ratio graph, 969-8919

 


Click Here for Agilent / Varian TV301 Manual

Click Here for Agilent / Varian V Series Brochure


A&J Vacuum also repair / rebuild and service Varian Agilent TV301 / V301 Turbo Pumps and Turbo Pump Controllers  along with all other Varian and Agilent Technology Vacuum Rotary Vane Pumps, Varian Dry Scroll Pump repair, Varian Leak Detector Repair and all other Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

This item is non-returnable/non-refundable

Remanufactured Agilent Technologies / Varian TV301 Navigator Turbo Vacuum Pump, CFF 6", PUMP ONLY, 969-8919

 

Agilent TV301 / Varian V301 Technical Data (CFF6 = DN100ISO, CFF8 = DN160ISO):


Varian / Agilent V301 Technical Data, 969-8919


Click Here for Agilent / Varian TV301 Manual

Click Here for Agilent / Varian V Series Brochure


A&J Vacuum also repair / rebuild and service Varian Agilent TV301 / V301 Turbo Pumps and Turbo Pump Controllers  along with all other Varian and Agilent Technology Vacuum Rotary Vane Pumps, Varian Dry Scroll Pump repair, Varian Leak Detector Repair and all other Pfeiffer Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

Item#:PN06956
Mfr Part#:9699299
Condition: Out of Stock Demo
Out of Stock
$345.00
Item#:PN06959
Mfr Part#:9699834S006
Condition: Out of Stock Remanufactured
Out of Stock
Price upon request
Item#:PN15894
Mfr Part#:9699347
Condition: In Stock New
In Stock
$204.00
Item#:PN15899
Mfr Part#:969-9834
Condition: Out of Stock New
Price upon request
Item#:PN15861
Mfr Part#:969-9883
Condition: Out of Stock New
Price upon request
Item#:PN15889
Mfr Part#:X3500-68000
Condition: Out of Stock New
Price upon request
Get started with your repair: 

We can have a repair estimate ready for your equipment within the hour of submission.

Request a repair estimate

Start your equipment repair process by creating a Service RMA.

Generate Service RMA

High quality service guaranteed

A&J Vacuum Services provides repairs on all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair and Mass Spectrometer repair. Our highly trained technicians will deliver the highest quality service and satisfaction.

We operate at our own full service repair facility which allows us to quickly and economically perform all repairs in a timely manner. Our advandced machinery enables us to handle all facets of the service and repair process. AJVS utilizes industry standard vibration analysis equipment and advanced testing equipment to troubleshoot and minimize all equipment failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.

AJVS repair process:
Repair Steps
  1. Full incoming inspection and run up time check, vibration check, drive inspection.
  2. Full disassembly of the pump, decontamination and cleaning.
  3. Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
  4. Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and log pump life.
  5. Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10 -Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
We can repair your:
 
  • Turbo Pumps
  • Rotary Vane Pumps
  • Dry Vacuum Pumps
  • Leak Detectors
  • Scroll Dry Pumps
  • Vacuum Boosters
  • Diaphragm Dry Pumps
Deals & Promotions
Contact
A&J Vacuum Services 16 Somerset Place,
Clifton, NJ 07012
Customer Service Phone: 973-249-0854,
Fax: 973-249-0855
Service Hours 8:00am to 5:00pm,
Monday thru Friday EST
@ A&J Vacuum Services, Inc. 2000-2026. All Rights Reserved.
All trademarks, trade names or logons mentioned or used are the property of their respective owners.