- PN 636163
- Pressure down to 10-3mbar
- Upper measuring limit mbar/torr 1000 / 750
- Ambient temperature range (operation) °C 10 - 40
Shopping Cart ( )
Vacuubrand VSP 3000 Pirani Gauge Sensor, 20636163 / 636163
Condition:
New
Item#:PN18815
Mfr Part#:20636163 / 636163
Manufacturer:BRANDTECH / Vacuubrand
Features:
Vacuubrand VSP 3000 Pirani Gauge Sensor 20636163 / 636163, Also known as Brandtech VSP3000 gauge sensor.
Vacuubran VSP 3000 Overview:
The Vacuubrand VSP 3000 vacuum sensor is based on thermal conductivity (Pirani) and offers a wide measurement range from atmospheric pressure down to 10-3mbar. The wetted parts are made of chemically resistant plastics (PBT, PUR) and alumina ceramics.
The VSP3000 sensor features a much better chemical resistance and ruggedness than conventional Pirani sensors with their fragile metallic spiral-wound filament.
Vacuubran VSP 3000 Features:
- up to four gauge heads VSK 3000 (Atm. - 0.1 mbar) and four VSP 3000 (Atm. - 10-3 mbar) can be simultaneously connected
- rugged VSP 3000 vacuum sensor made of plastics and ceramics with high chemical resistance
- rugged, splash-water proof VSP 3000 vacuum sensor, also for rough operating conditions
- VSP 3000 with wide measurement range from atmospheric pressure to fine vacuum
- combination of VSP 3000 with controller CVC 3000 and vacuum valves type VV-B allows fine vacuum control
A&J Vacuum Services, Inc is a Authorized Vacuubrand Service Facility. We repair / rebuild and service all Vacuubrand Diaphragm pumps, Rotary Vane Vacuum Pumps, and all other Vacuubrand equipment. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
This item is non-returnable/non-refundable
Vacuubrand VSP 3000 Pirani Gauge Sensor 20636163 / 636163, Also known as Brandtech VSP3000 gauge sensor.
Vacuubran VSP 3000 Technical Data:
| Vacuum sensor | VSP 3000 | |
| Cable length of vacuum sensor | m | 2 |
| Upper measuring limit | mbar/torr | 1000 / 750 |
| Lower measuring limit | mbar/torr | 1 x 10-3 / 1 x 10-3 |
| Measurement principle | Thermal conductivity (Pirani), chemically resistant plastics / ceramics | |
| Accuracy of measurement | +- 15% of indicated value in the range 0.01-5 mbar/hPa/torr | |
| Ambient temperature range (operation) | °C | 10 - 40 |
| Ambient temperature range (storage) | °C | -10 - 60 |
| Max. media temp. for continuous operation / short times | °C | 40 / 80 |
| Material of outer housing | Robust plastic housing with good chemical resistance | |
| Degree of protection | IP 20 | |
| Degree of protection of front side (also built-in version) | IP 42 | |
| Max. power for VACUU·BUS® (24V DC) | 4 A | |
| Cable length of external power supply | m | 2 |
| Interface | RS 232C | |
| Dimensions (L x W x H) | mm | 144 x 124 x 114 |
| Weight | kg | 0.44 |
| NRTL certification | Canada and the USA |
A&J Vacuum Services, Inc is a Authorized Vacuubrand Service Facility. We repair / rebuild and service all Vacuubrand Diaphragm pumps, Rotary Vane Vacuum Pumps, and all other Vacuubrand equipment. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Vacuubrand DCP3000, Brandtech DCP 3000 Vacuum Gauge with VSK 3000, VSK3000 Vacuum Sensor
Vacuubrand VSK3000, VSP3000 Vacuum Sensor, VSK 3000, VSP 3000 Brandtech vacuum Gauge,636657, 636163
Get started with your repair:
We can have a repair estimate ready for your equipment within the hour of submission.
Start your equipment repair process by creating a Service RMA.
High quality service guaranteed
A&J Vacuum Services provides repairs on all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair and Mass Spectrometer repair. Our highly trained technicians will deliver the highest quality service and satisfaction.
We operate at our own full service repair facility which allows us to quickly and economically perform all repairs in a timely manner. Our advandced machinery enables us to handle all facets of the service and repair process. AJVS utilizes industry standard vibration analysis equipment and advanced testing equipment to troubleshoot and minimize all equipment failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
AJVS repair process:
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly of the pump, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and log pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10 -Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
We can repair your:
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
Deals & Promotions
-
Edwards ELD500 Wet Portable Leak Detector With Integral Oil Sealed Rotary Vane Pump, 100-120V 60Hz, D13510906 ELD 500Item#: PN23588 Mfr Part#: D13510906
-
Pfeiffer HiScroll 6 Dry Scroll Pump with Manual Gas Ballast, 3.59 cfm, 100 - 127 V, 200 - 240 VAC, Single Phase, 50/60 HZ, ATEX, 2000026552 / PD S10 000 B / PDS10000BItem#: PN23774 Mfr Part#: 2000026552 / PD S10 000 B / PDS10000B
-
Leybold Scrollvac 3 Plus Scroll Pump, Oil-Free Dry Pump, 1-phase, 50/60 Hz, 115 V, 3.5 m3/h, 142030V310Item#: PN41078 Mfr Part#: 142030V310
-
Leybold Turbolab Core 90i Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 63 ISO-K), DIVAC 1.4T Diaphragm Pump, 501591V00000500Item#: PN24393 Mfr Part#: 501591V00000500
-
Pfeiffer HiScroll 18 Dry Scroll Pump with Manual Gas Ballast, Pressure Sensor Included, 10.65 cfm, 100 - 127 V, 200 - 240 VAC, Single Phase, 50/60 HZ, 2000026597 / PDS30010B / PD S30 010 BItem#: PN23779 Mfr Part#: 2000026597 / PDS30010B / PD S30 010 B
-
Edwards nXDS6iC Dry Scroll Vacuum Pump, Corrosive, 3.6 CFM / 100 - 127 V, 200 - 240 V, Single Phase, 50/60 Hz, A73502983Item#: PN15783 Mfr Part#: A73502983Price upon request
-
Pfeiffer Adixen ASM 340 D, Helium Leak Detector Dry Version, Universal Voltage 90-240 V, 50/60 Hz, KSBA00A2MM9A, Configurable I/O 37 pins, RS-232 and USB. Like New !Item#: PN17195 Mfr Part#: KSBA00A2MM9APrice upon request
-
Pfeiffer HiCube 300 Eco Turbo Pumping Station, Includes HiPace 300 Turbo Pump ISO 100, MVP 030-3 DC Diaphragm Vacuum Pump and DCU 002 Control Unit, 100-240 V 50/60 Hz, PMS7620000 / PM 025 019 AT / PM025019ATItem#: PN20408 Mfr Part#: PMS7620000 / PM 025 019 AT / PM025019AT
-
Edwards EMF 20 Oil Mist Exhaust Filter, Includes Mist Element and Odor Element, A46229000Item#: PN00844 Mfr Part#: A46229000
-
Pfeiffer ASM 390 Mobile Helium Leak Detector with ACP 40 Dry Scroll Pump and SplitFlow 80, ASM390, 2000034669 / CSGB01G2MM9AItem#: PN22455 Mfr Part#: 2000034669 / CSGB01G2MM9A
-
Leybold Scrollvac 3S Plus Scroll Pump with Inlet Valve, Oil-Free Dry Pump, 1-phase, 50/60 Hz, 115 V, 3.5 m3/h, 142030V410Item#: PN41098 Mfr Part#: 142030V410
-
Edwards Turbo Station T85 T-Station Dry Turbo Pumping T Station, Includes EXT85DX Turbo Pump (DN 63-ISO), XDD1 Backing Pump, 100-120V, TS85D2002Item#: PN24491 Mfr Part#: TS85D2002
-
Flexible Hose Coupling, Unbraided Vacuum Hose, KF 25 (NW 25), Stainless Steel Vacuum Fitting, 40", 1000mm, PN07714Item#: PN07714 Mfr Part#: KF25FX1000
-
Edwards Turbo Station T85H T-Station Turbo Pumping T Station, Includes EXT85DX Turbo Pump, 100-120 VAC (DN 40-KF), E2M1.5 Vacuum Pump, TS85W1002Item#: PN21267 Mfr Part#: TS85W1002
-
Edwards 3 RV3 Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, Factory set to 115V for USA, Hydrocarbon Oil, A65201906Item#: PN18128 Mfr Part#: A65201906
-
Leybold Turbolab Core 90i Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 63 CF-F), DIVAC 1.4T Diaphragm Pump, 501591V01000500Item#: PN24406 Mfr Part#: 501591V01000500Price upon request
-
Leybold Turbolab Core Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 40 KF), DIVAC 1.4T Diaphragm Pump, 501591V02000500Item#: PN24407 Mfr Part#: 501591V02000500
-
Leybold Turbolab Core 250i Turbo Pumping Station, Includes Turbovac TV250i Turbo Pump (DN 100 ISO-K), DIVAC 1.4T Diaphragm Pump, 501591V08000500Item#: PN24454 Mfr Part#: 501591V08000500
-
Leybold Turbolab Core 250i Turbo Station, Includes Turbovac TV250i Turbo Pump (DN 100 CF-F Conflat), DIVAC 1.4T Diaphragm Pump, 501591V09000500Item#: PN24455 Mfr Part#: 501591V09000500
-
Leybold Turbolab 90i Turbo Pumping Station, Includes Turbovac 90i Turbo Pump (DN 63 ISO-K), DIVAC 3.0T Diaphragm Pump, 501592V00001000Item#: PN24457 Mfr Part#: 501592V02000000
Contact
A&J Vacuum Services
16 Somerset Place,
Clifton, NJ 07012
Clifton, NJ 07012
Customer Service
Phone: 973-249-0854,
Fax: 973-249-0855
Fax: 973-249-0855
Service Hours
8:00am to 5:00pm,
Monday thru Friday EST
Monday thru Friday EST
HELP & FAQ
AJVS Help & Information
High Vacuum Technical Library
@ A&J Vacuum Services, Inc. 2000-2026. All Rights Reserved.
All trademarks, trade names or logons mentioned or used are the property of their respective owners.