LEYBOLD LEYBONOL LVO 210 OIL, 1 Liter, L21001, LVO210, is also known as Oerlikon LVO210 oil.

This Leybold LVO210 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 210 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.

The Leybold LVO210 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.

Leybold LVO210 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 210.

Viscosity:

• 97 at 40°C mm2/s
• 5.5 at 100°C mm2/s

Oerlikon Leybold Leybonol LVO 210 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.

Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.

This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:

• D2A
• D4A
• D8A
• D16A
• D30A
• D60A
• D90A
• D2.5E
• D1.6B
• D4B
• D8B
• D16B
• D25B
• D40B
• D65B

This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:

• WA/WAU 251
• WA/WAU 501
• WA/WAU 501H
• WA/WAU 1001
• WA/WAU 1001H
• WA/WAU 2001
• WA/WAU 2001H
• RA 3001, RA 5001

This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:

• DK50
• DK100
• DK200
• E75
• E225
• E250

A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Vacuum Pumps, Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

LEYBOLD LEYBONOL LVO 210 OIL, 5 Liters, L21005, LVO210, is also known as Oerlikon LVO210 oil.

This Leybold LVO210 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 210 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.

The Leybold LVO210 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.

Leybold LVO210 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 210.

Viscosity:

• 97 at 40°C mm2/s
• 5.5 at 100°C mm2/s

Oerlikon Leybold Leybonol LVO 210 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.

Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.

This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:

• D2A
• D4A
• D8A
• D16A
• D30A
• D60A
• D90A
• D2.5E
• D1.6B
• D4B
• D8B
• D16B
• D25B
• D40B
• D65B

This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:

• WA/WAU 251
• WA/WAU 501
• WA/WAU 501H
• WA/WAU 1001
• WA/WAU 1001H
• WA/WAU 2001
• WA/WAU 2001H
• RA 3001, RA 5001

This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:

• DK50
• DK100
• DK200
• E75
• E225
• E250

A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Vacuum Pumps, Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

LEYBOLD LEYBONOL LVO 210 OIL, 5 Liters, L21005, LVO100, is also known as Oerlikon LVO210 oil.

This Leybold LVO210 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 210 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.

The Leybold LVO210 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.

Leybold LVO210 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 210.

Viscosity:

• 97 at 40°C mm2/s
• 5.5 at 100°C mm2/s

Oerlikon Leybold Leybonol LVO 210 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.

Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.

This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:

• D2A
• D4A
• D8A
• D16A
• D30A
• D60A
• D90A
• D2.5E
• D1.6B
• D4B
• D8B
• D16B
• D25B
• D40B
• D65B

This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:

• WA/WAU 251
• WA/WAU 501
• WA/WAU 501H
• WA/WAU 1001
• WA/WAU 1001H
• WA/WAU 2001
• WA/WAU 2001H
• RA 3001, RA 5001

This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:

• DK50
• DK100
• DK200
• E75
• E225
• E250

A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Vacuum Pumps, Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

LEYBOLD LEYBONOL LVO 310 OIL, 1 Liter, L31001, LVO310, is also known as Oerlikon LVO310 oil.

This Leybold LVO310 is a direct replacement Synthetic Vacuum pump oil (PAO with additives) LVO 310 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.

The Leybold LVO310 is best for cold starting at low temperatures, pumping of air, pumping chemicaly intert gases, water vapor and small quantities of refrigerant R717 (amonia)

Leybold LVO310 it's known by high thermal and oxidative stability. LVO 310.

Viscosity:

• 29 at 40°C mm2/s
• 5.5 at 100°C mm2/s

Polyalfaolefins (PAO) (LEYBONOL LVO 3XX) Polyalphaolefin oils are synthetic hydrocarbons which are paraffin like, but have a uniform structure. Thermal and chemical resistance is better compared to mineral oils. Owing to their good flowing properties when cold they can be used at low temperatures. Elastomer compatibility and resistance against hydrolysis are comparable to mineral oils.

Synthetic Oils Synthetic oils are produced through chemical reactions. The group of synthetic oils includes liquids differing widely as to their chemical structure and composition. Correspondingly, their physical and chemical properties differ considerably. Synthetic oils are used in those cases where special properties of the oil are required which can not be fulfilled by mineral oils.

A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Vacuum Pumps, Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

LEYBOLD LEYBONOL LVO 700 Synthetic Cyclic Hydrocarbon Oil, 1 Liter, L70001, LVO700, is also known as LVO-700 oil.

This Leybold LVO700 is a direct replacement Synthetic cyclic hydrocarbon oil for Leybold HE200 and LVO 200 Vacuum pump oil. LVO 700 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.

This oil also replaces the discontinued LVO 110.

The Leybold LVO700 oil is being used with Leybold Sogevac BI Series pumps, Leybold Trivac A series and B series vacuum pumps.

Leybold LVO700 can be mixed with Leybold LVO200 oil, we strongly recomend full oil replacement with new LVO 700.

Leybold LVO-700 has Very high thermal stability and highly resistant against oxidation and decomposition.

LVO 700 Oil has a potential for Very long lifetime, up to 3 years in clean application.

Viscosity:

• 31.3 mm2/s at 40°C

Oerlikon Leybold Leybonol LVO 700 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.

Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.

This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:

• D2A
• D4A
• D8A
• D16A
• D30A
• D60A
• D90A
• D2.5E
• D1.6B
• D4B
• D8B
• D16B
• D25B
• D65B

This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:

• WA/WAU 251
• WA/WAU 501
• WA/WAU 501H
• WA/WAU 1001
• WA/WAU 1001H
• WA/WAU 2001
• WA/WAU 2001H
• RA 3001, RA 5001

This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:

• DK50
• DK100
• DK200
• E75
• E225
• E250

A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Vacuum Pumps, Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854

LEYBOLD LEYBONOL LVO 700 Synthetic Cyclic Hydrocarbon Oil, 5 Liter, L70005, LVO700, is also known as LVO-700 oil.

This Leybold LVO700 is a direct replacement Synthetic cyclic hydrocarbon oil for Leybold HE200 and LVO 200 Vacuum pump oil. LVO 700 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.

​This oil also replaces the discontinued LVO 110.

The Leybold LVO700 oil is being used with Leybold Sogevac BI Series pumps, Leybold Trivac A series and B series vacuum pumps.

Leybold LVO700 can be mixed with Leybold LVO200 oil, we strongly recomend full oil replacement with new LVO 700.

Leybold LVO-700 has Very high thermal stability and highly resistant against oxidation and decomposition.

LVO 700 Oil has a potential for Very long lifetime, up to 3 years in clean application.

Viscosity:

• 31.3 mm2/s at 40°C

Oerlikon Leybold Leybonol LVO 700 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.

Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.

This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:

• D2A
• D4A
• D8A
• D16A
• D30A
• D60A
• D90A
• D2.5E
• D1.6B
• D4B
• D8B
• D16B
• D25B
• D65B

This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:

• WA/WAU 251
• WA/WAU 501
• WA/WAU 501H
• WA/WAU 1001
• WA/WAU 1001H
• WA/WAU 2001
• WA/WAU 2001H
• RA 3001, RA 5001

This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:

• DK50
• DK100
• DK200
• E75
• E225
• E250

A&J Vacuum repair / rebuild and service all Leybold Oerlikon  Vacuum Pumps, Helium Leak Detectors  along with all other  Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854