Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
Hydrocarbon Oil
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
LEYBOLD LEYBONOL LVO 100 OIL, 1 Liter, L10001, LVO100, is also known as Oerlikon LVO100 oil.
This Leybold LVO100 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 100 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.
Leybold LVO100 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.
Leybold LVO100 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 100.
Viscosity:
- 95 at 40°C mm2/s
- 10.5 at 100°C mm2/s
Click Here for Leybold LVO100 MSDS Sheet
LVO 100 is also available in the following sizes:
Leybold Leybonol LVO 100 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.
Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.
This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:
- D2A
- D4A
- D8A
- D16A
- D30A
- D60A
- D90A
- D2.5E
- D1.6B
- D4B
- D8B
- D16B
- D25B
- D40B
- D65B
This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:
- WA/WAU 251
- WA/WAU 501
- WA/WAU 501H
- WA/WAU 1001
- WA/WAU 1001H
- WA/WAU 2001
- WA/WAU 2001H
- RA 3001, RA 5001
This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:
- DK50
- DK100
- DK200
- E75
- E225
- E250
A&J Vacuum repair / rebuild and service all Leybold Oerlikon Vacuum Pumps, Helium Leak Detectors along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
LEYBOLD LEYBONOL LVO 100 OIL, 5 Liter, L10005, LVO100, is also known as Oerlikon LVO100 oil.
This Leybold LVO100 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 100 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.
Leybold LVO100 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.
Leybold LVO100 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 100.
Viscosity:
- 95 at 40°C mm2/s
- 10.5 at 100°C mm2/s
Oerlikon Leybold Leybonol LVO 100 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.
Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.
This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:
- D2A
- D4A
- D8A
- D16A
- D30A
- D60A
- D90A
- D2.5E
- D1.6B
- D4B
- D8B
- D16B
- D25B
- D40B
- D65B
This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:
- WA/WAU 251
- WA/WAU 501
- WA/WAU 501H
- WA/WAU 1001
- WA/WAU 1001H
- WA/WAU 2001
- WA/WAU 2001H
- RA 3001, RA 5001
This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:
- DK50
- DK100
- DK200
- E75
- E225
- E250
A&J Vacuum repair / rebuild and service all Leybold Vacuum Pumps, Helium Leak Detectors along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
LEYBOLD LEYBONOL LVO 100 OIL, 20 Liter, L10020, LVO100, is also known as Oerlikon LVO100 oil.
This Leybold LVO100 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 100 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.
Leybold LVO100 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.
Leybold LVO100 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 100.
Viscosity:
- 95 at 40°C mm2/s
- 10.5 at 100°C mm2/s
Leybold Leybonol LVO 100 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.
Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.
This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:
- D2A
- D4A
- D8A
- D16A
- D30A
- D60A
- D90A
- D2.5E
- D1.6B
- D4B
- D8B
- D16B
- D25B
- D40B
- D65B
This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:
- WA/WAU 251
- WA/WAU 501
- WA/WAU 501H
- WA/WAU 1001
- WA/WAU 1001H
- WA/WAU 2001
- WA/WAU 2001H
- RA 3001, RA 5001
This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:
- DK50
- DK100
- DK200
- E75
- E225
- E250
A&J Vacuum repair / rebuild and service all Leybold Oerlikon Vacuum Pumps, Helium Leak Detectors along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
LEYBOLD LEYBONOL LVO 120 OIL, 1 Liter, L12001, LVO120, is also known as Oerlikon LVO120 oil.
This Leybold LVO120 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 120 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.
The Leybold LVO120 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.
Leybold LVO120 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 120.
Viscosity:
- 46 at 40°C mm2/s
- 6.75 at 100°C mm2/s
Oerlikon Leybold Leybonol LVO 120 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.
Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.
This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:
- D2A
- D4A
- D8A
- D16A
- D30A
- D60A
- D90A
- D2.5E
- D1.6B
- D4B
- D8B
- D16B
- D25B
- D40B
- D65B
This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:
- WA/WAU 251
- WA/WAU 501
- WA/WAU 501H
- WA/WAU 1001
- WA/WAU 1001H
- WA/WAU 2001
- WA/WAU 2001H
- RA 3001, RA 5001
This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:
- DK50
- DK100
- DK200
- E75
- E225
- E250
A&J Vacuum repair / rebuild and service all Leybold Oerlikon Vacuum Pumps, Helium Leak Detectors along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
LEYBOLD LEYBONOL LVO 120 OIL, 5 Liter, L12005, LVO120, is also known as Oerlikon LVO120 oil.
This Leybold LVO120 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 120 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.
The Leybold LVO120 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.
Leybold LVO120 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 120.
Viscosity:
- 46 at 40°C mm2/s
- 6.75 at 100°C mm2/s
Oerlikon Leybold Leybonol LVO 120 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.
Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.
This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:
- D2A
- D4A
- D8A
- D16A
- D30A
- D60A
- D90A
- D2.5E
- D1.6B
- D4B
- D8B
- D16B
- D25B
- D40B
- D65B
This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:
- WA/WAU 251
- WA/WAU 501
- WA/WAU 501H
- WA/WAU 1001
- WA/WAU 1001H
- WA/WAU 2001
- WA/WAU 2001H
- RA 3001, RA 5001
This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:
- DK50
- DK100
- DK200
- E75
- E225
- E250
A&J Vacuum repair / rebuild and service all Leybold Oerlikon Vacuum Pumps, Helium Leak Detectors along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
LEYBOLD LEYBONOL LVO 120 OIL, 1 Liter, L12001, LVO120, is also known as Oerlikon LVO120 oil.
This Leybold LVO120 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 120 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.
This Leybold LVO120 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.
Leybold LVO120 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 120.
Viscosity:
- 46 at 40°C mm2/s
- 6.75 at 100°C mm2/s
Oerlikon Leybold Leybonol LVO 120 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.
Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.
This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:
- D2A
- D4A
- D8A
- D16A
- D30A
- D60A
- D90A
- D2.5E
- D1.6B
- D4B
- D8B
- D16B
- D25B
- D40B
- D65B
This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:
- WA/WAU 251
- WA/WAU 501
- WA/WAU 501H
- WA/WAU 1001
- WA/WAU 1001H
- WA/WAU 2001
- WA/WAU 2001H
- RA 3001, RA 5001
This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:
- DK50
- DK100
- DK200
- E75
- E225
- E250
A&J Vacuum repair / rebuild and service all Leybold Oerlikon Vacuum Pumps, Helium Leak Detectors along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
LEYBOLD LEYBONOL LVO 130 OIL, 1 Liter, L13001, LVO100, is also known as Oerlikon LVO130 oil.
This Leybold LVO130 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 130 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.
Leybold LVO130 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.
Leybold LVO130 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 130.
Viscosity:
- 68 at 40°C mm2/s
- 9 at 100°C mm2/s
Flash Point: 248°C
Density at 15°C: 885 kg/m3
Pour Point: -21°C
Oerlikon Leybold Leybonol LVO 130 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.
Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.
This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:
- D2A
- D4A
- D8A
- D16A
- D30A
- D60A
- D90A
- D2.5E
- D1.6B
- D4B
- D8B
- D16B
- D25B
- D40B
- D65B
This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:
- WA/WAU 251
- WA/WAU 501
- WA/WAU 501H
- WA/WAU 1001
- WA/WAU 1001H
- WA/WAU 2001
- WA/WAU 2001H
- RA 3001, RA 5001
This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:
- DK50
- DK100
- DK200
- E75
- E225
- E250
A&J Vacuum repair / rebuild and service all Leybold Oerlikon Vacuum Pumps, Helium Leak Detectors along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
LEYBOLD LEYBONOL LVO 130 OIL, 2 Liters, L13002, LVO130, is also known as Oerlikon LVO130 oil.
This Leybold LVO130 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 130 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.
This Leybold LVO130 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.
Leybold LVO130 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 130.
Viscosity:
- 68 at 40°C mm2/s
- 9 at 100°C mm2/s
Flash Point: 248°C
Density at 15°C: 885 kg/m3
Pour Point: -21°C
Oerlikon Leybold Leybonol LVO 130 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.
Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.
This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:
- D2A
- D4A
- D8A
- D16A
- D30A
- D60A
- D90A
- D2.5E
- D1.6B
- D4B
- D8B
- D16B
- D25B
- D40B
- D65B
This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:
- WA/WAU 251
- WA/WAU 501
- WA/WAU 501H
- WA/WAU 1001
- WA/WAU 1001H
- WA/WAU 2001
- WA/WAU 2001H
- RA 3001, RA 5001
This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:
- DK50
- DK100
- DK200
- E75
- E225
- E250
A&J Vacuum repair / rebuild and service all Leybold Oerlikon Vacuum Pumps, Helium Leak Detectors along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
LEYBOLD LEYBONOL LVO 130 OIL, 5 Liters, L13005, LVO100, is also known as Oerlikon LVO130 oil.
This Leybold LVO130 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 130 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.
This Leybold LVO130 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.
Leybold LVO130 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 130.
Viscosity:
- 68 at 40°C mm2/s
- 9 at 100°C mm2/s
Flash Point: 248°C
Density at 15°C: 885 kg/m3
Pour Point: -21°C
Leybold Leybonol LVO 130 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.
Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.
This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:
- D2A
- D4A
- D8A
- D16A
- D30A
- D60A
- D90A
- D2.5E
- D1.6B
- D4B
- D8B
- D16B
- D25B
- D40B
- D65B
This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:
- WA/WAU 251
- WA/WAU 501
- WA/WAU 501H
- WA/WAU 1001
- WA/WAU 1001H
- WA/WAU 2001
- WA/WAU 2001H
- RA 3001, RA 5001
This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:
- DK50
- DK100
- DK200
- E75
- E225
- E250
A&J Vacuum repair / rebuild and service all Leybold Oerlikon Vacuum Pumps, Helium Leak Detectors along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
LEYBOLD LEYBONOL LVO 130 OIL, 20 Liters, L13020, LVO130, is also known as Oerlikon LVO130 oil.
This Leybold LVO130 is a direct replacement mineral oil for Leybold HE200 Vacuum pump oil. LVO 130 Vacuum Pump oil is the original Leybold Vacuum Pump oil for large selection of Leybold Vacuum Pumps.
This Leybold LVO130 oil is being used with Leybold Ruvac pumps, Leybold DK and E piston Vacuum Pumps, Leybold Trivac A series and B series vacuum pumps.
Leybold LVO130 can be mixed with Leybold HE200 oil, we strongly recomend full oil replacement with new LVO 130.
Viscosity:
- 68 at 40°C mm2/s
- 9 at 100°C mm2/s
Flash Point: 248°C
Density at 15°C: 885 kg/m3
Pour Point: -21°C
Oerlikon Leybold Leybonol LVO 130 mineral oils are products distilled and refined from crude oil. These do not consist of precisely defined compounds but rather consist of a complex mixture. The way in which the mineral oil is pre-treated and its composition is decisive as to the applications it will be suited for.
Depending on the distribution of the hydrocarbons and the dominance of certain properties, mineral oils are grouped according to paraffin-base, naphthenic and aromatic. For the purpose of attaining especially low ultimate pressures, mineral oils must be selected on the basis of a core fraction. The thermal and chemical resistance of mineral oils has been found to be adequate in the majority of applications. They offer a high degree of compatibility with elastomers and resistance to hydrolysis.
This Oil is designed to be used with the following Oerlikon Leybold Trivac Rotary Vane Pumps:
- D2A
- D4A
- D8A
- D16A
- D30A
- D60A
- D90A
- D2.5E
- D1.6B
- D4B
- D8B
- D16B
- D25B
- D40B
- D65B
This Oil is designed to be used with the following Oerlikon Leybold Ruvac Pumps:
- WA/WAU 251
- WA/WAU 501
- WA/WAU 501H
- WA/WAU 1001
- WA/WAU 1001H
- WA/WAU 2001
- WA/WAU 2001H
- RA 3001, RA 5001
This Oil is designed to be used with the following Oerlikon Leybold E DK Rotary Piston Pumps:
- DK50
- DK100
- DK200
- E75
- E225
- E250
A&J Vacuum repair / rebuild and service all Leybold Oerlikon Vacuum Pumps, Helium Leak Detectors along with all other Leybold Turbo Pumping Stations, Leybold Turbo Pump Repair, Roots Pump Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
