Fully refurbished Edwards E2M30 Dual Stage Rotary Vane Pump coupled with a NW25 Inlet Flange and Outlet Flange. This Edwards E2M30 Rotary Vane Pump has a peak pumping velocity of 22.3 cfm and a final pressure of 1 x 10-3 Torr. It has been thoroughly examined and is ready for broad range of applications within the research and industrial industries. The Edwards E2M30 Pump comes with an entire 12-Month Warranty. A374-15-981
The Edwards E2M30 electric motor are totally enclosed and are cooled by the motor-cooling fan which directs air along the motor fins.
The single-phase motors have a thermal overload device. When the E2M30 motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. The single phase motors have an on/off switch.
Edwards E2M30 oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents air suckback unless the gas-ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow gravity oil drain.
The E2M30 A374-15-981 pump has an inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on an aluminum alloy baseplate on rubber pads.
Click Here for Edwards E2M28 and E2M30 Manual
A&J Vacuum also repair / rebuild and service all Edwards E1M18, E2M18, E2M18, E2M28, E2M30 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Displacement (swept volume) | |
50 Hz | 19 cfm |
60 Hz | 23 cfm |
Maximum Pumping Speed | |
50 Hz | 16.2 cfm |
60 Hz | 19.4 cfm |
Rotational Speed | |
50 Hz | 1440 r min-1 |
60 Hz | 1720 r min-1 |
Ultimate vacuum (total pressure) | |
without gas ballast (partial pressure) | 7 x 10-5 torr |
without gas ballast (total pressure) | 7 x 10-4 torr |
with full gas ballast (partial pressure) | 1.5 x 10-1 torr |
Maximum Water Vapor Inlet Pressure: | 22.5 torr |
Maximum Water Vapor Pumping Rate | 0.7 kg h-1 |
Oil Capacity | 1.32 L |
Recommended Oil Type | Ultragrade 19 |
Weight | 44 kg / 97 lbs |
Click Here for Edwards E2M28 and E2M30 Manual
A&J Vacuum also repair / rebuild and service all Edwards E1M18, E2M18, E2M18, E2M28, E2M30 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Fully refurbished Edwards E2M30 Dual Stage Rotary Vane Pump coupled with a NW25 Inlet Flange and Outlet Flange. This Edwards E2M30 Rotary Vane Pump has a peak pumping velocity of 22.3 cfm and a final pressure of 1 x 10-3 Torr. It has been thoroughly examined and is ready for broad range of applications within the research and industrial industries. The Edwards E2M30 Pump comes with an entire 12-Month Warranty. A374-15-981
The Edwards E2M30 electric motor are totally enclosed and are cooled by the motor-cooling fan which directs air along the motor fins.
The single-phase motors have a thermal overload device. When the E2M30 motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. The single phase motors have an on/off switch.
Edwards E2M30 oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents air suckback unless the gas-ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow gravity oil drain.
The E2M30 A374-15-981 pump has an inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on an aluminum alloy baseplate on rubber pads.
Click Here for Edwards E2M28 and E2M30 Manual
A&J Vacuum also repair / rebuild and service all Edwards E1M18, E2M18, E2M18, E2M28, E2M30 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Displacement (swept volume) | |
50 Hz | 19 cfm |
60 Hz | 23 cfm |
Maximum Pumping Speed | |
50 Hz | 16.2 cfm |
60 Hz | 19.4 cfm |
Rotational Speed | |
50 Hz | 1440 r min-1 |
60 Hz | 1720 r min-1 |
Ultimate vacuum (total pressure) | |
without gas ballast (partial pressure) | 7 x 10-5 torr |
without gas ballast (total pressure) | 7 x 10-4 torr |
with full gas ballast (partial pressure) | 1.5 x 10-1 torr |
Maximum Water Vapor Inlet Pressure: | 22.5 torr |
Maximum Water Vapor Pumping Rate | 0.7 kg h-1 |
Oil Capacity | 1.32 L |
Recommended Oil Type | Ultragrade 19 |
Weight | 44 kg / 97 lbs |
Click Here for Edwards E2M28 and E2M30 Manual
A&J Vacuum also repair / rebuild and service all Edwards E1M18, E2M18, E2M18, E2M28, E2M30 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.