KF - VCR Male Adapter, KF 16 (NW 16 Flange) to 1/4 inch VCR, Stainless Steel Vacuum Fitting Dimensions:
A: 1.18 in / 30 mm
B: 0.17 in / 4.4 mm
C: 1.46 in / 37 mm
Overview
KF - VCR Male Adapter, KF 16 (NW 16) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07847
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 16 to 1/4 inch VCR, Stainless Steel Vacuum Fitting.
The KF to VCR Adapters are available in the following sizes:
NW 16 x 1/4" VCR
NW 16 x 1/2" VCR
NW 25 x 1/4" VCR
NW 25 x 1/2" VCR
NW 40 x 1/4" VCR
NW 40 x 1/2" VCR
NW 50 x 1/4" VCR
NW 50 x 1/2" VCR
KF - VCR Male Adapter, KF 25 (NW 25 Flange) to 1/4 inch VCR, Stainless Steel Vacuum Fitting Dimensions:
A: 1.57 in / 40 mm
B: 0.17 in / 4.4 mm
C: 1.46 in / 37 mm
Overview
KF - VCR Male Adapter, KF 25 (NW 25) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07849
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 25 to 1/4 inch VCR, Stainless Steel Vacuum Fitting.
The KF to VCR Adapters are available in the following sizes:
NW 16 x 1/4" VCR
NW 16 x 1/2" VCR
NW 25 x 1/4" VCR
NW 25 x 1/2" VCR
NW 40 x 1/4" VCR
NW 40 x 1/2" VCR
NW 50 x 1/4" VCR
NW 50 x 1/2" VCR
KF - VCR Male Adapter, KF 40 (NW 40 Flange) to 1/4 inch VCR, Stainless Steel Vacuum Fitting Dimensions:
A: 2.17 in / 55 mm
B: 0.17 in / 4.4 mm
C: 1.46 in / 37 mm
Overview
KF - VCR Male Adapter, KF 40 (NW 40) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07851
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 40 to 1/4 inch VCR, Stainless Steel Vacuum Fitting.
The KF to VCR Adapters are available in the following sizes:
NW 16 x 1/4" VCR
NW 16 x 1/2" VCR
NW 25 x 1/4" VCR
NW 25 x 1/2" VCR
NW 40 x 1/4" VCR
NW 40 x 1/2" VCR
NW 50 x 1/4" VCR
NW 50 x 1/2" VCR
KF - VCR Male Adapter, KF 40 (NW 40 Flange) to 1/2 inch VCR, Stainless Steel Vacuum Fitting Dimensions:
A: 2.17 in / 55 mm
B: 0.41 in / 10.4 mm
C: 1.65 in / 41.9 mm
Overview
KF - VCR Male Adapter, KF 40 (NW 40) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07852
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 40 to 1/2 inch VCR, Stainless Steel Vacuum Fitting.
The KF to VCR Adapters are available in the following sizes:
NW 16 x 1/4" VCR
NW 16 x 1/2" VCR
NW 25 x 1/4" VCR
NW 25 x 1/2" VCR
NW 40 x 1/4" VCR
NW 40 x 1/2" VCR
NW 50 x 1/4" VCR
NW 50 x 1/2" VCR
KF - VCR Male Adapter, KF 50 (NW 50 Flange) to 1/4 inch VCR, Stainless Steel Vacuum Fitting Dimensions:
A: 2.95 in / 75 mm
B: 0.17 in / 4.4 mm
C: 1.46 in / 37 mm
Overview
KF - VCR Male Adapter, KF 50 (NW 50) to 1/4" VCR, Stainless Steel Vacuum Fitting, PN07853
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 50 to 1/4 inch VCR, Stainless Steel Vacuum Fitting.
The KF to VCR Adapters are available in the following sizes:
NW 16 x 1/4" VCR
NW 16 x 1/2" VCR
NW 25 x 1/4" VCR
NW 25 x 1/2" VCR
NW 40 x 1/4" VCR
NW 40 x 1/2" VCR
NW 50 x 1/4" VCR
NW 50 x 1/2" VCR
KF - VCR Male Adapter, KF 50 (NW 50 Flange) to 1/2 inch VCR, Stainless Steel Vacuum Fitting Dimensions:
A: 2.95 in / 75 mm
B: 0.41 in / 10.4 mm
C: 1.65 in / 41.9 mm
Overview
KF - VCR Male Adapter, KF 50 (NW 50) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07854
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 50 to 1/2 inch VCR, Stainless Steel Vacuum Fitting.
The KF to VCR Adapters are available in the following sizes:
NW 16 x 1/4" VCR
NW 16 x 1/2" VCR
NW 25 x 1/4" VCR
NW 25 x 1/2" VCR
NW 40 x 1/4" VCR
NW 40 x 1/2" VCR
NW 50 x 1/4" VCR
NW 50 x 1/2" VCR
KF - VCR Male Adapter, KF 16 (NW 16 Flange) to 1/2 inch VCR, Stainless Steel Vacuum Fitting Dimensions:
A: 1.18 in / 30 mm
B: 0.41 in / 10.4 mm
C: 1.65 in / 41.9 mm
Overview
KF - VCR Male Adapter, KF 16 (NW 16) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07848
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 16 to 1/2 inch VCR, Stainless Steel Vacuum Fitting.
The KF to VCR Adapters are available in the following sizes:
NW 16 x 1/4" VCR
NW 16 x 1/2" VCR
NW 25 x 1/4" VCR
NW 25 x 1/2" VCR
NW 40 x 1/4" VCR
NW 40 x 1/2" VCR
NW 50 x 1/4" VCR
NW 50 x 1/2" VCR
KF - VCR Male Adapter, KF 25 (NW 25 Flange) to 1/2 inch VCR, Stainless Steel Vacuum Fitting Dimensions:
A: 1.57 in / 40 mm
B: 0.41 in / 10.4 mm
C: 1.65 in / 41.9 mm
Overview
KF - VCR Male Adapter, KF 25 (NW 25) to 1/2" VCR, Stainless Steel Vacuum Fitting, PN07850
The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF - VCR Male Adapters are made out of Stainless Steel. KF (also referred to as NW) assemblies consist of two Flanges, a Center-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.
Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF-VCR Male Adapter, KF 25 to 1/2 inch VCR, Stainless Steel Vacuum Fitting.
The KF to VCR Adapters are available in the following sizes:
NW 16 x 1/4" VCR
NW 16 x 1/2" VCR
NW 25 x 1/4" VCR
NW 25 x 1/2" VCR
NW 40 x 1/4" VCR
NW 40 x 1/2" VCR
NW 50 x 1/4" VCR
NW 50 x 1/2" VCR