Centering Ring KF 10 With Viton® O-Ring, KF 10 (NW 10), Stainless Steel, The centering ring contains a rubber elastomeric fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50, KF10CRVS, 304 SS

Stainless Steel ring with Viton® O-ring, KF10CRVS

• A: 0.39 in / 10 mm
• B: 0.47 in / 12 mm
• C: 0.31 in / 8 mm
• D: 0.15 in / 3.9 mm

Overview:

The Centering Rings are available in the following sizes: NW 10, NW 16, NW 25, NW 40, NW 50.

The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.

The centering ring contains a rubber elastomer fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50

Standard sizes for quick flange fittings are KF-10, KF-16, KF-25 and KF-50 with Flange sizes NW-10, NW16, NW-25, NW-40

KF (also referred to as NW) assemblies consist of two Flanges, a Center Viton® O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Corrosive resistant stainless steel (316) with Viton® O-ring provides great resistance to heat and agressive chemicals.

Viton® is a registered treadmark of DuPont Performance Elastomers

Centering Ring KF 16 With Viton® O-Ring, KF 16 (NW 16), Stainless Steel, The centering ring contains a rubber elastomeric fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50, KF16CRVS, 304 SS

Stainless Steel ring with Viton® O-ring, KF16CRVS

• A: 0.63 in / 16 mm
• B: 0.67 in / 17 mm
• C: 0.31 in / 8 mm
• D: 0.15 in / 3.9 mm

Overview:

The Centering Rings are available in the following sizes: NW 10, NW 16, NW 25, NW 40, NW 50.

The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.

The centering ring contains a rubber elastomer fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50

Standard sizes for quick flange fittings are KF-10, KF-16, KF-25 and KF-50 with Flange sizes NW-10, NW16, NW-25, NW-40

KF (also referred to as NW) assemblies consist of two Flanges, a Center Viton® O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Corrosive resistant stainless steel (316) with Viton® O-ring provides great resistance to heat and agressive chemicals.

Viton® is a registered treadmark of DuPont Performance Elastomers

Centering Ring KF 25 With Viton® O-Ring, KF 25 (NW 25), Stainless Steel, The centering ring contains a rubber elastomeric fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50, KF25CRVS, 304 SS

Stainless Steel ring with Viton® O-ring, KF25CRVS

• A: 0.98 in / 25 mm
• B: 1.02 in / 26 mm
• C: 0.31 in / 8 mm
• D: 0.15 in / 3.9 mm

Overview:

The Centering Rings are available in the following sizes: NW 10, NW 16, NW 25, NW 40, NW 50.

The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.

The centering ring contains a rubber elastomer fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50

Standard sizes for quick flange fittings are KF-10, KF-16, KF-25 and KF-50 with Flange sizes NW-10, NW16, NW-25, NW-40

KF (also referred to as NW) assemblies consist of two Flanges, a Center Viton® O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Corrosive resistant stainless steel (316) with Viton® O-ring provides great resistance to heat and agressive chemicals.

Viton® is a registered treadmark of DuPont Performance Elastomers

Centering Ring KF 40 With Viton® O-Ring, KF 40 (NW 40), Stainless Steel, The centering ring contains a rubber elastomeric fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50, KF40CRVS, 304 SS

Stainless Steel ring with Viton® O-ring, KF40CRVS

• A: 1.57 in / 40 mm
• B: 1.61 in / 41 mm
• C: 0.31 in / 8 mm
• D: 0.15 in / 3.9 mm

Overview:

The Centering Rings are available in the following sizes: NW 10, NW 16, NW 25, NW 40, NW 50.

The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.

The centering ring contains a rubber elastomer fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50

Standard sizes for quick flange fittings are KF-10, KF-16, KF-25 and KF-50 with Flange sizes NW-10, NW16, NW-25, NW-40

KF (also referred to as NW) assemblies consist of two Flanges, a Center Viton® O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Corrosive resistant stainless steel (316) with Viton® O-ring provides great resistance to heat and agressive chemicals.

Viton® is a registered treadmark of DuPont Performance Elastomers

Centering Ring KF 50 With Viton® O-Ring, KF 50 (NW 50), Stainless Steel, The centering ring contains a rubber elastomeric fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50, KF50CRVS, 304 SS

Stainless Steel ring with Viton® O-ring, KF50CRVS

• A: 1.97 in / 50 mm
• B: 2.05 in / 52 mm
• C: 0.31 in / 8 mm
• D: 0.15 in / 3.9 mm

Overview:

The Centering Rings are available in the following sizes: NW 10, NW 16, NW 25, NW 40, NW 50.

The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.

The centering ring contains a rubber elastomer fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50

Standard sizes for quick flange fittings are KF-10, KF-16, KF-25 and KF-50 with Flange sizes NW-10, NW16, NW-25, NW-40

KF (also referred to as NW) assemblies consist of two Flanges, a Center Viton® O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the O-Ring, which is held in place by a metal centering ring, to generate the vacuum seal.

Corrosive resistant stainless steel (316) with Viton® O-ring provides great resistance to heat and agressive chemicals.

Viton® is a registered treadmark of DuPont Performance Elastomers

Centering Ring Adapter KF-10 to KF-16, NW10/16, With Viton® O-Ring Stainless Steel, KF10/16, PN40708

NW10 to NW16 O-ring Adapter Overview:

These adapting rings are used to addopt NW10 to NW16 flanges Edwards C10512345

The Centering Rings are available in Aluminum / Viton®, Aluminum / NBR, Stainless Steel / Viton® or Stainless Steel / NBR.

The centering ring contains a rubber elastomer fluorocarbon o-ring. Those are also recognized as NW10, NW16, NW25, NW40, or KF-10 KF-16, KF-25, KF-40 and KF-50

KF (also referred to as NW) assemblies consist of two Flanges, a Center Viton® O-Ring and an aluminum Clamp. Clamps are assembled with wing nuts to insure ease of use over time without tools.

Corrosive resistant stainless steel (316) with Viton® O-ring provides great resistance to heat and agressive chemicals.

Viton® is a registered treadmark of DuPont Performance Elastomers

Pfeiffer Centering Ring with Screen, Stainless Steel, FKM, DN 40 ISO-KF, 122ZRD040

Pfeiffer Centering Ring Features:

• Stainless steel material
• Approximate 1 mm | 0.04 in mesh size

Pfeiffer Centering Ring / 122ZRD040 Overview:

The accessory is a stainless steel centering ring.

A&J Vacuum repair / rebuild and service Pfeiffer HiPace 10, HiPace 30, Hipace 80 Neo, Hipace 300, Hipace 700 Turbo Pumps, PMP03940 Pfeiffer Backing  Pumps along with all other  Pfeiffer  Vacuum Pumps and all other Pfeiffer Leak Detector  Service and repair. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.