Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
Edwards Vacuum
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil,100-120 VAC, IEC 60320 Connector, A37132902
Edwards Vacuum E2M1.5 Overview:
The Edwards Vacuum E2M 1.5 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.
The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.
Edwards Vacuum E2M 1.5 Applications:
- Analytical instruments
- Laboratory bench top vacuum
- Leak detectors, Helium
- Research and development
- Backing turbomolecular pumps
Edwards Vacuum E2M 1.5 Features:
- Pumping speeds of either 0.7 to 1.5 m3h‑1.
- Industry proven long term reliable performance.
- Free standing, compact design providing flexibility of use.
- Alternate side inlet connection port so that overall installation height can be reduced to minimum when required.
- Low noise, with the E2M0.7 at just 43 dB(A).
- Low energy consumption, with the E2M0.7 at 0.09 kW.
- O ring sealed sight glass allows visual inspection of oil level and condition.
- Gas ballast valve for large water vapour handling capacity.
- Simple installation and operation with no customer wiring.
- Forced air cooling ensures low pump surface temperature.
- Internal ATEX classification of Ex II 3 G c IIB T4.
- Approved EN61010, CSA22.2 and UL61010.
Edwards Vacuum E2M1.5 Dimensions:
A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Edwards E2M0.7 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 100-120 VAC, IEC Connector, A37141902
Please note: Mains Cable is not included.
Edwards Vacuum E2M0.7 Overview:
The Edwards Vacuum E2M 0.7 pumps are two-stage, direct drive, sliding vane pumps. The E2M0.7 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.
The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.
Edwards Vacuum E2M 0.7 Applications:
- Analytical instruments
- Laboratory bench top vacuum
- Leak detectors, Helium
- Research and development
- Backing turbomolecular pumps
Edwards Vacuum E2M 0.7 Features:
- Pumping speeds of either 0.7 to 1.5 m3h‑1.
- Industry proven long term reliable performance.
- Free standing, compact design providing flexibility of use.
- Alternate side inlet connection port so that overall installation height can be reduced to minimum when required.
- Low noise, with the E2M0.7 at just 43 dB(A).
- Low energy consumption, with the E2M0.7 at 0.09 kW.
- O ring sealed sight glass allows visual inspection of oil level and condition.
- Gas ballast valve for large water vapour handling capacity.
- Simple installation and operation with no customer wiring.
- Forced air cooling ensures low pump surface temperature.
- Internal ATEX classification of Ex II 3 G c IIB T4.
- Approved EN61010, CSA22.2 and UL61010.
Edwards Vacuum E2M0.7 Dimensions:
A&J Vacuum also repair / rebuild and service all Edwards E2M0.7, E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 200-230 VAC, A37122919
Edwards Vacuum E2M1.5 Overview:
The Edwards E2M1.5 pumps are two-stage, direct drive, sliding vane pumps. The pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.
The E2M 1.5 motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.
An Edwards Vacuum Pump E2M1.5 oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.
Edwards Vacuum E2M1.5 Rotary Vacuum Pump Applications:
- Analytical instruments - LCMS
- Automotive
- Beam lines and high energy physics
- Centrifuges, ultra-high speed
- Coating
- Cryogenics
- Degassing/curing - oil, epoxy resin
- Distillation/extraction/filtration
- Freeze drying
- Furnaces
- Gas bottle filling/emptying
- Gel drying
- Glove boxes, ovens
- Laboratory bench top vacuum
- Leak detectors, Helium
- Load locks and transfer chambers
- Refrigeration manufacture
- Research and development
- Rotary, centrifugal evaporators
- Scanning electron microscopes - SEM
- SEM/FIB (Ion beam repair)
- Solvent recovery
- Surface science instruments
- Turbomolecular backing pumps
- TV manufacturing / light bulb manufacturer
Edwards Vacuum E2M1.5 Rotary Vacuum Pump Features:
- The pump is designed for reliable, long‑term operation.
- Thermal overload device prevents overheating (single phase only).
- The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
- The motors are totally enclosed and are cooled by the motor cooling fan.
- Full height O ring sealed oil sight glass for easy checking of oil level and condition.
- Large sight glass and operating oil range.
- IE3 energy efficient 3 phase motor used with E2M28.
Edwards Vacuum E2M1.5 Dimensions:
A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854.
Edwards E2M1.5 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 200-230 VAC, IEC Connector, A37132919, A371-32-919
Edwards Vacuum E2M1.5 Overview:
The Edwards Vacuum E2M 1.5 pumps are two-stage, direct drive, sliding vane pumps. The E2M1.5 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.
The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.
Edwards Vacuum E2M 1.5 Applications:
- Analytical instruments
- Laboratory bench top vacuum
- Leak detectors, Helium
- Research and development
- Backing turbomolecular pumps
Edwards Vacuum E2M 1.5 Features:
- Pumping speeds of either 0.7 to 1.5 m3h‑1.
- Industry proven long term reliable performance.
- Free standing, compact design providing flexibility of use.
- Alternate side inlet connection port so that overall installation height can be reduced to minimum when required.
- Low noise, with the E2M0.7 at just 43 dB(A).
- Low energy consumption, with the E2M0.7 at 0.09 kW.
- O ring sealed sight glass allows visual inspection of oil level and condition.
- Gas ballast valve for large water vapour handling capacity.
- Simple installation and operation with no customer wiring.
- Forced air cooling ensures low pump surface temperature.
- Internal ATEX classification of Ex II 3 G c IIB T4.
- Approved EN61010, CSA22.2 and UL61010.
Edwards Vacuum E2M1.5 Dimensions:
A&J Vacuum also repair / rebuild and service all Edwards E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Edwards E2M0.7 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon Elite Z oil, 200-230 VAC, IEC Connector, A37141919
Please note: Mains Cable is not included.
Edwards Vacuum E2M0.7 Overview:
The Edwards Vacuum E2M 0.7 pumps are two-stage, direct drive, sliding vane pumps. The E2M0.7 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.
The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.
Edwards Vacuum E2M 0.7 Applications:
- Analytical instruments
- Laboratory bench top vacuum
- Leak detectors, Helium
- Research and development
- Backing turbomolecular pumps
Edwards Vacuum E2M 0.7 Features:
- Pumping speeds of either 0.7 to 1.5 m3h‑1.
- Industry proven long term reliable performance.
- Free standing, compact design providing flexibility of use.
- Alternate side inlet connection port so that overall installation height can be reduced to minimum when required.
- Low noise, with the E2M0.7 at just 43 dB(A).
- Low energy consumption, with the E2M0.7 at 0.09 kW.
- O ring sealed sight glass allows visual inspection of oil level and condition.
- Gas ballast valve for large water vapour handling capacity.
- Simple installation and operation with no customer wiring.
- Forced air cooling ensures low pump surface temperature.
- Internal ATEX classification of Ex II 3 G c IIB T4.
- Approved EN61010, CSA22.2 and UL61010.
Edwards Vacuum E2M0.7 Dimensions:
A&J Vacuum also repair / rebuild and service all Edwards E2M0.7, E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Edwards E2M0.7 Vacuum Pump, Dual Stage, Rotary Vane Pump, Hydrocarbon, 200-230 VAC, No Power Connector, A37131919
Please note: This unit doesn't include a power connector or mains cable.
Edwards Vacuum E2M0.7 Overview:
The Edwards Vacuum E2M 0.7 pumps are two-stage, direct drive, sliding vane pumps. The E2M0.7 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.
The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.
Edwards Vacuum E2M 0.7 Applications:
- Analytical instruments
- Laboratory bench top vacuum
- Leak detectors, Helium
- Research and development
- Backing turbomolecular pumps
Edwards Vacuum E2M 0.7 Features:
- Pumping speeds of either 0.7 to 1.5 m3h‑1.
- Industry proven long term reliable performance.
- Free standing, compact design providing flexibility of use.
- Alternate side inlet connection port so that overall installation height can be reduced to minimum when required.
- Low noise, with the E2M0.7 at just 43 dB(A).
- Low energy consumption, with the E2M0.7 at 0.09 kW.
- O ring sealed sight glass allows visual inspection of oil level and condition.
- Gas ballast valve for large water vapour handling capacity.
- Simple installation and operation with no customer wiring.
- Forced air cooling ensures low pump surface temperature.
- Internal ATEX classification of Ex II 3 G c IIB T4.
- Approved EN61010, CSA22.2 and UL61010.
Edwards Vacuum E2M0.7 Dimensions:
A&J Vacuum also repair / rebuild and service all Edwards E2M0.7, E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
Edwards Micromeritics E2M0.7 Vacuum Pump, Dual Stage, Rotary Vane Pump, 200-230 VAC, IEC Connector for Micromeritics, A37142919, 062-62801-23
Please note: Mains Cable is not included.
Edwards Vacuum E2M0.7 Overview:
The Edwards Vacuum E2M 0.7 pumps are two-stage, direct drive, sliding vane pumps. The E2M0.7 pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through a coupling by a single-phase motor.
The motor of this rotary vane vacuum pump is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gasballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through a sight-glass. An oil filler-plug is fitted to the top of the oil box. An oil drain-plug is fitted at the bottom of the oil box. The pump has a carrying handle, inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on a steel baseplate on rubber pads.
Edwards Vacuum E2M 0.7 Applications:
- Analytical instruments
- Laboratory bench top vacuum
- Leak detectors, Helium
- Research and development
- Backing turbomolecular pumps
Edwards Vacuum E2M 0.7 Features:
- Pumping speeds of either 0.7 to 1.5 m3h‑1.
- Industry proven long term reliable performance.
- Free standing, compact design providing flexibility of use.
- Alternate side inlet connection port so that overall installation height can be reduced to minimum when required.
- Low noise, with the E2M0.7 at just 43 dB(A).
- Low energy consumption, with the E2M0.7 at 0.09 kW.
- O ring sealed sight glass allows visual inspection of oil level and condition.
- Gas ballast valve for large water vapour handling capacity.
- Simple installation and operation with no customer wiring.
- Forced air cooling ensures low pump surface temperature.
- Internal ATEX classification of Ex II 3 G c IIB T4.
- Approved EN61010, CSA22.2 and UL61010.
Edwards Vacuum E2M0.7 Dimensions:
A&J Vacuum also repair / rebuild and service all Edwards E2M0.7, E2M1.5, E2M2, E2M5, E2M8, E2M12 Series Vacuum Pumps along with all other Edwards Turbo Pumps, Edwards Dry Pumps, Edwards Scroll Pumps and all other Edwards Vacuum Rotary Vane pumps. Please contact us for information on service program or click here http://www.ajvs.com/service.php to go to our Service page. We also offer Emergency service upon request. For more information Please contact A&J Vacuum Services at 973-249-0854
