Ovens
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
- Direct Replacement for ADP-31
- Temperature Range of +20 °C to 240 °C
- Capacity 1 Cubic Foot (27 liter)
- Digital Control Panel
Vacuum Oven Yamato ADP-300C Programmable, 1 Cubic Foot, 27 Liter 115V 10A 50/60Hz, Maximum Temp 240 C, ADP 300C, ADP300C
The Yamato ADP-300C Vacuum Oven, Programmable,1 Cubic Foot, 10 Liters 115V 10A 50/60Hz, is the direct replacement for Yamato ADP-31 vacuum oven. The new Yamato ADP-300C has many advantages over discontinued ADP-31 Vacuum Ovens.
The ADP300C stands out over ADP-31 with the following features:
- Operating Temperature Range of +20 C to 240 C, compare to +5 C to +240C on ADP21
- New VS4 Controller with Programmable Features
- ADP300C offers Digital Readout on Control Panel
- 18 mm Purge and Vacuum Ports
- PID Control by microprocessor
The Yamato ADP-300C range from +20 C to +240 C (465 F), Vacuum range from atmosphere to 0.75 Torr. Vacuum and Vent valves are located on thop of the ADP-300C with 18 mm hose barb for Vacuum hose connections. That Yamato ADP-300 has a footprint of 16.8 x 17.6 x 21inch. ADP-300C voltage requirement 115 VAC at 50/60 Hz, 10 Amps, we also offer Yamato ADP-310C unit with same specifications as the ADP-300C but requires 220 VAC 50/60Hz, 5.5 Amps. For full list of ADP-300C and ADP-310C Please reffer to specification Tap, or oprating manual.
Yamato ADP-31, Yamato ADP-300C, Yamato ADP-300C, Yamato ADP-310C, Yamato DP-43C, and Yamato DP-63C Vacuum Ovens are commonly used in laboratories as well as in manufacturing sites in wide range of Industry segments.
Typical Vacuum Oven Applications include:
- Vacuum Drying
- Vacuum outgasing
- Clean Process production
- Curing / Drying
- Finish baking
- Shrink fitting
- Steralization
- Burn-in
- Vacuum bonding
- Aging / Annealing
Vacuum Oven Yamato ADP-300C Programmable, 1 Cubic Foot, 27 Liter 115V 10A 50/60Hz, Maximum Temp 240 C, ADP 300C, ADP300C
| Performance ADP200C ADP210C ADP300C ADP310C | ||||
| System | Vacuum drying by decompressed chamber direct heating | |||
| Operating temperature range | Room temp.+20 to 240°C | |||
| Operating pressure range | 101 to 0.1 kPa (at absolute pressure) | |||
| Temp. control accuracy | ±1.5°C (at 150°C) | |||
| Max. temp. reaching time |
Approx. 70 min. (no load, no vacuum)
|
Approx. 100 min. (no load, no vacuum)
|
||
| Components | ||||
| Interior Material | Type 304 Stainless steel | |||
| Exterior Material | Cold rolled steel plate with baked-on melamine resin finish | |||
| Door | Single swing door | |||
| Heat insulating material | Rock wool | |||
| Heating method | Decompressed chamber direct heating | |||
| Heater |
Mica heater, 0.68kW
|
Mica heater, 1.05kW
|
||
| Vacuum gauge | Bourdon tube type, 101 to 0kPa (Gauge pressure) | |||
| Observation window | Tempered glass (12 mm thickness) and polycarbonate resin plate | |||
| Controller | ||||
| Temp. control method | PlD control by microprocessor | |||
| Temp. setting method | Digital setting with   key |
|||
| Temp display method | Digital display | |||
| Safe Device | ||||
| Safety countermeasures | Electric leakage breaker | |||
| Standard | ||||
| Internal dimensions(W×D×Hmm) |
200×250×200
|
300×300×300
|
||
| External dimensions(W×D×Hmm) |
427×447×535
|
527×499×639
|
||
| Internal capacity |
10 L
|
27 L
|
||
| Shelf plate with standard load |
Approx. 30 kg/piece
|
Approx. 30 kg/piece
|
||
| Shelf rest step number |
2 steps
|
3 steps
|
||
| Shelf rest pitch |
63mm
|
71mm
|
||
| Vacuum port | 18mm O.D. | |||
| Power source 50/60Hz | 115V, single phase, 7A |
220V, single phase, 4A | 115V, single phase, 10 A |
220V, single phase, 5.5 A |
| Weight |
Approx. 30 kg
|
Approx. 55 kg
|
||
| Accessories | ||||
| Shelf plate |
Stainless steel, 2 pcs
|
Stainless steel, 3 pcs
|
||
| Adaptor for vacuum hose | 18mm O.D. 1 pc | |||
| Earth adaptor | 1 pc | |||
| Optional Accessories | ||||
| Additional shelf plate | ||||
Yamato ADP-200, ADP200, ADP 200, Yamato ADP-300, ADP300, ADP 300 Vacuum Oven 
|
Service and Repair - Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Overview
Vacuum Oven Yamato ADP-300C Programmable, 1 Cubic Foot, 27 Liter 115V 10A 50/60Hz, Maximum Temp 240 C, ADP 300C, ADP300C
The Yamato ADP-300C Vacuum Oven, Programmable,1 Cubic Foot, 10 Liters 115V 10A 50/60Hz, is the direct replacement for Yamato ADP-31 vacuum oven. The new Yamato ADP-300C has many advantages over discontinued ADP-31 Vacuum Ovens.
The ADP300C stands out over ADP-31 with the following features:
- Operating Temperature Range of +20 C to 240 C, compare to +5 C to +240C on ADP21
- New VS4 Controller with Programmable Features
- ADP300C offers Digital Readout on Control Panel
- 18 mm Purge and Vacuum Ports
- PID Control by microprocessor
The Yamato ADP-300C range from +20 C to +240 C (465 F), Vacuum range from atmosphere to 0.75 Torr. Vacuum and Vent valves are located on thop of the ADP-300C with 18 mm hose barb for Vacuum hose connections. That Yamato ADP-300 has a footprint of 16.8 x 17.6 x 21inch. ADP-300C voltage requirement 115 VAC at 50/60 Hz, 10 Amps, we also offer Yamato ADP-310C unit with same specifications as the ADP-300C but requires 220 VAC 50/60Hz, 5.5 Amps. For full list of ADP-300C and ADP-310C Please reffer to specification Tap, or oprating manual.
Yamato ADP-31, Yamato ADP-300C, Yamato ADP-300C, Yamato ADP-310C, Yamato DP-43C, and Yamato DP-63C Vacuum Ovens are commonly used in laboratories as well as in manufacturing sites in wide range of Industry segments.
Typical Vacuum Oven Applications include:
- Vacuum Drying
- Vacuum outgasing
- Clean Process production
- Curing / Drying
- Finish baking
- Shrink fitting
- Steralization
- Burn-in
- Vacuum bonding
- Aging / Annealing
Specifications
Vacuum Oven Yamato ADP-300C Programmable, 1 Cubic Foot, 27 Liter 115V 10A 50/60Hz, Maximum Temp 240 C, ADP 300C, ADP300C
| Performance ADP200C ADP210C ADP300C ADP310C | ||||
| System | Vacuum drying by decompressed chamber direct heating | |||
| Operating temperature range | Room temp.+20 to 240°C | |||
| Operating pressure range | 101 to 0.1 kPa (at absolute pressure) | |||
| Temp. control accuracy | ±1.5°C (at 150°C) | |||
| Max. temp. reaching time |
Approx. 70 min. (no load, no vacuum)
|
Approx. 100 min. (no load, no vacuum)
|
||
| Components | ||||
| Interior Material | Type 304 Stainless steel | |||
| Exterior Material | Cold rolled steel plate with baked-on melamine resin finish | |||
| Door | Single swing door | |||
| Heat insulating material | Rock wool | |||
| Heating method | Decompressed chamber direct heating | |||
| Heater |
Mica heater, 0.68kW
|
Mica heater, 1.05kW
|
||
| Vacuum gauge | Bourdon tube type, 101 to 0kPa (Gauge pressure) | |||
| Observation window | Tempered glass (12 mm thickness) and polycarbonate resin plate | |||
| Controller | ||||
| Temp. control method | PlD control by microprocessor | |||
| Temp. setting method | Digital setting with key |
|||
| Temp display method | Digital display | |||
| Safe Device | ||||
| Safety countermeasures | Electric leakage breaker | |||
| Standard | ||||
| Internal dimensions(W×D×Hmm) |
200×250×200
|
300×300×300
|
||
| External dimensions(W×D×Hmm) |
427×447×535
|
527×499×639
|
||
| Internal capacity |
10 L
|
27 L
|
||
| Shelf plate with standard load |
Approx. 30 kg/piece
|
Approx. 30 kg/piece
|
||
| Shelf rest step number |
2 steps
|
3 steps
|
||
| Shelf rest pitch |
63mm
|
71mm
|
||
| Vacuum port | 18mm O.D. | |||
| Power source 50/60Hz | 115V, single phase, 7A |
220V, single phase, 4A | 115V, single phase, 10 A |
220V, single phase, 5.5 A |
| Weight |
Approx. 30 kg
|
Approx. 55 kg
|
||
| Accessories | ||||
| Shelf plate |
Stainless steel, 2 pcs
|
Stainless steel, 3 pcs
|
||
| Adaptor for vacuum hose | 18mm O.D. 1 pc | |||
| Earth adaptor | 1 pc | |||
| Optional Accessories | ||||
| Additional shelf plate | ||||
Service & Repair
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
